{
  "HAPI" : "3.1",
  "status" : {
    "code" : 1200,
    "message" : "ok"
  },
  "catalog" : [ {
    "id" : "aae/definitive/PT1M/native",
    "title" : "Definitive minute data in the coordinate system of measurement of the data ('native'), provided by Addis Ababa, Ethiopia (AAE) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "aae/definitive/PT1M/xyzf",
    "title" : "Definitive minute data in XYZF orientation, provided by Addis Ababa, Ethiopia (AAE) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "aae/definitive/PT1M/hdzf",
    "title" : "Definitive minute data in HDZF orientation, provided by Addis Ababa, Ethiopia (AAE) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "aae/definitive/PT1M/diff",
    "title" : "Definitive minute data in DIFF orientation, provided by Addis Ababa, Ethiopia (AAE) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "aae/quasi-def/PT1M/native",
    "title" : "Quasi-def minute data in the coordinate system of measurement of the data ('native'), provided by Addis Ababa, Ethiopia (AAE) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "aae/quasi-def/PT1M/xyzf",
    "title" : "Quasi-def minute data in XYZF orientation, provided by Addis Ababa, Ethiopia (AAE) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "aae/quasi-def/PT1M/hdzf",
    "title" : "Quasi-def minute data in HDZF orientation, provided by Addis Ababa, Ethiopia (AAE) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "aae/quasi-def/PT1M/diff",
    "title" : "Quasi-def minute data in DIFF orientation, provided by Addis Ababa, Ethiopia (AAE) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "aae/reported/PT1M/native",
    "title" : "Reported minute data in the coordinate system of measurement of the data ('native'), provided by Addis Ababa, Ethiopia (AAE) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "aae/best-avail/PT1M/native",
    "title" : "Best-avail minute data in the coordinate system of measurement of the data ('native'), provided by Addis Ababa, Ethiopia (AAE) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "aae/best-avail/PT1M/xyzf",
    "title" : "Best-avail minute data in XYZF orientation, provided by Addis Ababa, Ethiopia (AAE) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "aae/best-avail/PT1M/hdzf",
    "title" : "Best-avail minute data in HDZF orientation, provided by Addis Ababa, Ethiopia (AAE) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "aae/best-avail/PT1M/diff",
    "title" : "Best-avail minute data in DIFF orientation, provided by Addis Ababa, Ethiopia (AAE) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "aae/quasi-def/PT1S/native",
    "title" : "Quasi-def second data in the coordinate system of measurement of the data ('native'), provided by Addis Ababa, Ethiopia (AAE) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "aae/quasi-def/PT1S/xyzf",
    "title" : "Quasi-def second data in XYZF orientation, provided by Addis Ababa, Ethiopia (AAE) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "aae/quasi-def/PT1S/hdzf",
    "title" : "Quasi-def second data in HDZF orientation, provided by Addis Ababa, Ethiopia (AAE) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "aae/quasi-def/PT1S/diff",
    "title" : "Quasi-def second data in DIFF orientation, provided by Addis Ababa, Ethiopia (AAE) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "aae/reported/PT1S/native",
    "title" : "Reported second data in the coordinate system of measurement of the data ('native'), provided by Addis Ababa, Ethiopia (AAE) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "aae/best-avail/PT1S/native",
    "title" : "Best-avail second data in the coordinate system of measurement of the data ('native'), provided by Addis Ababa, Ethiopia (AAE) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "aae/best-avail/PT1S/xyzf",
    "title" : "Best-avail second data in XYZF orientation, provided by Addis Ababa, Ethiopia (AAE) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "aae/best-avail/PT1S/hdzf",
    "title" : "Best-avail second data in HDZF orientation, provided by Addis Ababa, Ethiopia (AAE) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "aae/best-avail/PT1S/diff",
    "title" : "Best-avail second data in DIFF orientation, provided by Addis Ababa, Ethiopia (AAE) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "abg/definitive/PT1M/native",
    "title" : "Definitive minute data in the coordinate system of measurement of the data ('native'), provided by Alibag, India (ABG) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "abg/definitive/PT1M/xyzf",
    "title" : "Definitive minute data in XYZF orientation, provided by Alibag, India (ABG) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "abg/definitive/PT1M/hdzf",
    "title" : "Definitive minute data in HDZF orientation, provided by Alibag, India (ABG) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "abg/definitive/PT1M/diff",
    "title" : "Definitive minute data in DIFF orientation, provided by Alibag, India (ABG) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "abg/reported/PT1M/native",
    "title" : "Reported minute data in the coordinate system of measurement of the data ('native'), provided by Alibag, India (ABG) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "abg/best-avail/PT1M/native",
    "title" : "Best-avail minute data in the coordinate system of measurement of the data ('native'), provided by Alibag, India (ABG) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "abg/best-avail/PT1M/xyzf",
    "title" : "Best-avail minute data in XYZF orientation, provided by Alibag, India (ABG) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "abg/best-avail/PT1M/hdzf",
    "title" : "Best-avail minute data in HDZF orientation, provided by Alibag, India (ABG) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "abg/best-avail/PT1M/diff",
    "title" : "Best-avail minute data in DIFF orientation, provided by Alibag, India (ABG) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "abk/adjusted/PT1M/native",
    "title" : "Adjusted minute data in the coordinate system of measurement of the data ('native'), provided by Abisko, Sweden (ABK) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "abk/adjusted/PT1M/xyzf",
    "title" : "Adjusted minute data in XYZF orientation, provided by Abisko, Sweden (ABK) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "abk/adjusted/PT1M/hdzf",
    "title" : "Adjusted minute data in HDZF orientation, provided by Abisko, Sweden (ABK) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "abk/adjusted/PT1M/diff",
    "title" : "Adjusted minute data in DIFF orientation, provided by Abisko, Sweden (ABK) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "abk/definitive/PT1M/native",
    "title" : "Definitive minute data in the coordinate system of measurement of the data ('native'), provided by Abisko, Sweden (ABK) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "abk/definitive/PT1M/xyzf",
    "title" : "Definitive minute data in XYZF orientation, provided by Abisko, Sweden (ABK) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "abk/definitive/PT1M/hdzf",
    "title" : "Definitive minute data in HDZF orientation, provided by Abisko, Sweden (ABK) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "abk/definitive/PT1M/diff",
    "title" : "Definitive minute data in DIFF orientation, provided by Abisko, Sweden (ABK) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "abk/quasi-def/PT1M/native",
    "title" : "Quasi-def minute data in the coordinate system of measurement of the data ('native'), provided by Abisko, Sweden (ABK) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "abk/quasi-def/PT1M/xyzf",
    "title" : "Quasi-def minute data in XYZF orientation, provided by Abisko, Sweden (ABK) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "abk/quasi-def/PT1M/hdzf",
    "title" : "Quasi-def minute data in HDZF orientation, provided by Abisko, Sweden (ABK) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "abk/quasi-def/PT1M/diff",
    "title" : "Quasi-def minute data in DIFF orientation, provided by Abisko, Sweden (ABK) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "abk/reported/PT1M/native",
    "title" : "Reported minute data in the coordinate system of measurement of the data ('native'), provided by Abisko, Sweden (ABK) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "abk/best-avail/PT1M/native",
    "title" : "Best-avail minute data in the coordinate system of measurement of the data ('native'), provided by Abisko, Sweden (ABK) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "abk/best-avail/PT1M/xyzf",
    "title" : "Best-avail minute data in XYZF orientation, provided by Abisko, Sweden (ABK) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "abk/best-avail/PT1M/hdzf",
    "title" : "Best-avail minute data in HDZF orientation, provided by Abisko, Sweden (ABK) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "abk/best-avail/PT1M/diff",
    "title" : "Best-avail minute data in DIFF orientation, provided by Abisko, Sweden (ABK) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "abk/adjusted/PT1S/native",
    "title" : "Adjusted second data in the coordinate system of measurement of the data ('native'), provided by Abisko, Sweden (ABK) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "abk/adjusted/PT1S/xyzf",
    "title" : "Adjusted second data in XYZF orientation, provided by Abisko, Sweden (ABK) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "abk/adjusted/PT1S/hdzf",
    "title" : "Adjusted second data in HDZF orientation, provided by Abisko, Sweden (ABK) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "abk/adjusted/PT1S/diff",
    "title" : "Adjusted second data in DIFF orientation, provided by Abisko, Sweden (ABK) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "abk/quasi-def/PT1S/native",
    "title" : "Quasi-def second data in the coordinate system of measurement of the data ('native'), provided by Abisko, Sweden (ABK) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "abk/quasi-def/PT1S/xyzf",
    "title" : "Quasi-def second data in XYZF orientation, provided by Abisko, Sweden (ABK) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "abk/quasi-def/PT1S/hdzf",
    "title" : "Quasi-def second data in HDZF orientation, provided by Abisko, Sweden (ABK) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "abk/quasi-def/PT1S/diff",
    "title" : "Quasi-def second data in DIFF orientation, provided by Abisko, Sweden (ABK) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "abk/reported/PT1S/native",
    "title" : "Reported second data in the coordinate system of measurement of the data ('native'), provided by Abisko, Sweden (ABK) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "abk/best-avail/PT1S/native",
    "title" : "Best-avail second data in the coordinate system of measurement of the data ('native'), provided by Abisko, Sweden (ABK) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "abk/best-avail/PT1S/xyzf",
    "title" : "Best-avail second data in XYZF orientation, provided by Abisko, Sweden (ABK) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "abk/best-avail/PT1S/hdzf",
    "title" : "Best-avail second data in HDZF orientation, provided by Abisko, Sweden (ABK) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "abk/best-avail/PT1S/diff",
    "title" : "Best-avail second data in DIFF orientation, provided by Abisko, Sweden (ABK) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "aia/adjusted/PT1M/native",
    "title" : "Adjusted minute data in the coordinate system of measurement of the data ('native'), provided by Vernadsky, Agentine Islands (AIA) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "aia/adjusted/PT1M/xyzf",
    "title" : "Adjusted minute data in XYZF orientation, provided by Vernadsky, Agentine Islands (AIA) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "aia/adjusted/PT1M/hdzf",
    "title" : "Adjusted minute data in HDZF orientation, provided by Vernadsky, Agentine Islands (AIA) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "aia/adjusted/PT1M/diff",
    "title" : "Adjusted minute data in DIFF orientation, provided by Vernadsky, Agentine Islands (AIA) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "aia/definitive/PT1M/native",
    "title" : "Definitive minute data in the coordinate system of measurement of the data ('native'), provided by Vernadsky, Agentine Islands (AIA) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "aia/definitive/PT1M/xyzf",
    "title" : "Definitive minute data in XYZF orientation, provided by Vernadsky, Agentine Islands (AIA) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "aia/definitive/PT1M/hdzf",
    "title" : "Definitive minute data in HDZF orientation, provided by Vernadsky, Agentine Islands (AIA) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "aia/definitive/PT1M/diff",
    "title" : "Definitive minute data in DIFF orientation, provided by Vernadsky, Agentine Islands (AIA) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "aia/reported/PT1M/native",
    "title" : "Reported minute data in the coordinate system of measurement of the data ('native'), provided by Vernadsky, Agentine Islands (AIA) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "aia/best-avail/PT1M/native",
    "title" : "Best-avail minute data in the coordinate system of measurement of the data ('native'), provided by Vernadsky, Agentine Islands (AIA) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "aia/best-avail/PT1M/xyzf",
    "title" : "Best-avail minute data in XYZF orientation, provided by Vernadsky, Agentine Islands (AIA) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "aia/best-avail/PT1M/hdzf",
    "title" : "Best-avail minute data in HDZF orientation, provided by Vernadsky, Agentine Islands (AIA) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "aia/best-avail/PT1M/diff",
    "title" : "Best-avail minute data in DIFF orientation, provided by Vernadsky, Agentine Islands (AIA) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "aia/reported/PT1S/native",
    "title" : "Reported second data in the coordinate system of measurement of the data ('native'), provided by Vernadsky, Agentine Islands (AIA) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "aia/best-avail/PT1S/native",
    "title" : "Best-avail second data in the coordinate system of measurement of the data ('native'), provided by Vernadsky, Agentine Islands (AIA) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "aia/best-avail/PT1S/xyzf",
    "title" : "Best-avail second data in XYZF orientation, provided by Vernadsky, Agentine Islands (AIA) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "aia/best-avail/PT1S/hdzf",
    "title" : "Best-avail second data in HDZF orientation, provided by Vernadsky, Agentine Islands (AIA) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "aia/best-avail/PT1S/diff",
    "title" : "Best-avail second data in DIFF orientation, provided by Vernadsky, Agentine Islands (AIA) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "ale/definitive/PT1M/native",
    "title" : "Definitive minute data in the coordinate system of measurement of the data ('native'), provided by Alert, Canada (ALE) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "ale/definitive/PT1M/xyzf",
    "title" : "Definitive minute data in XYZF orientation, provided by Alert, Canada (ALE) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "ale/definitive/PT1M/hdzf",
    "title" : "Definitive minute data in HDZF orientation, provided by Alert, Canada (ALE) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "ale/definitive/PT1M/diff",
    "title" : "Definitive minute data in DIFF orientation, provided by Alert, Canada (ALE) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "ale/reported/PT1M/native",
    "title" : "Reported minute data in the coordinate system of measurement of the data ('native'), provided by Alert, Canada (ALE) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "ale/best-avail/PT1M/native",
    "title" : "Best-avail minute data in the coordinate system of measurement of the data ('native'), provided by Alert, Canada (ALE) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "ale/best-avail/PT1M/xyzf",
    "title" : "Best-avail minute data in XYZF orientation, provided by Alert, Canada (ALE) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "ale/best-avail/PT1M/hdzf",
    "title" : "Best-avail minute data in HDZF orientation, provided by Alert, Canada (ALE) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "ale/best-avail/PT1M/diff",
    "title" : "Best-avail minute data in DIFF orientation, provided by Alert, Canada (ALE) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "ams/adjusted/PT1M/native",
    "title" : "Adjusted minute data in the coordinate system of measurement of the data ('native'), provided by Martin de Vivies, French Southern Territories (AMS) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "ams/adjusted/PT1M/xyzf",
    "title" : "Adjusted minute data in XYZF orientation, provided by Martin de Vivies, French Southern Territories (AMS) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "ams/adjusted/PT1M/hdzf",
    "title" : "Adjusted minute data in HDZF orientation, provided by Martin de Vivies, French Southern Territories (AMS) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "ams/adjusted/PT1M/diff",
    "title" : "Adjusted minute data in DIFF orientation, provided by Martin de Vivies, French Southern Territories (AMS) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "ams/definitive/PT1M/native",
    "title" : "Definitive minute data in the coordinate system of measurement of the data ('native'), provided by Martin de Vivies, French Southern Territories (AMS) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "ams/definitive/PT1M/xyzf",
    "title" : "Definitive minute data in XYZF orientation, provided by Martin de Vivies, French Southern Territories (AMS) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "ams/definitive/PT1M/hdzf",
    "title" : "Definitive minute data in HDZF orientation, provided by Martin de Vivies, French Southern Territories (AMS) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "ams/definitive/PT1M/diff",
    "title" : "Definitive minute data in DIFF orientation, provided by Martin de Vivies, French Southern Territories (AMS) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "ams/reported/PT1M/native",
    "title" : "Reported minute data in the coordinate system of measurement of the data ('native'), provided by Martin de Vivies, French Southern Territories (AMS) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "ams/best-avail/PT1M/native",
    "title" : "Best-avail minute data in the coordinate system of measurement of the data ('native'), provided by Martin de Vivies, French Southern Territories (AMS) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "ams/best-avail/PT1M/xyzf",
    "title" : "Best-avail minute data in XYZF orientation, provided by Martin de Vivies, French Southern Territories (AMS) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "ams/best-avail/PT1M/hdzf",
    "title" : "Best-avail minute data in HDZF orientation, provided by Martin de Vivies, French Southern Territories (AMS) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "ams/best-avail/PT1M/diff",
    "title" : "Best-avail minute data in DIFF orientation, provided by Martin de Vivies, French Southern Territories (AMS) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "ams/adjusted/PT1S/native",
    "title" : "Adjusted second data in the coordinate system of measurement of the data ('native'), provided by Martin de Vivies, French Southern Territories (AMS) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "ams/adjusted/PT1S/xyzf",
    "title" : "Adjusted second data in XYZF orientation, provided by Martin de Vivies, French Southern Territories (AMS) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "ams/adjusted/PT1S/hdzf",
    "title" : "Adjusted second data in HDZF orientation, provided by Martin de Vivies, French Southern Territories (AMS) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "ams/adjusted/PT1S/diff",
    "title" : "Adjusted second data in DIFF orientation, provided by Martin de Vivies, French Southern Territories (AMS) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "ams/reported/PT1S/native",
    "title" : "Reported second data in the coordinate system of measurement of the data ('native'), provided by Martin de Vivies, French Southern Territories (AMS) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "ams/best-avail/PT1S/native",
    "title" : "Best-avail second data in the coordinate system of measurement of the data ('native'), provided by Martin de Vivies, French Southern Territories (AMS) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "ams/best-avail/PT1S/xyzf",
    "title" : "Best-avail second data in XYZF orientation, provided by Martin de Vivies, French Southern Territories (AMS) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "ams/best-avail/PT1S/hdzf",
    "title" : "Best-avail second data in HDZF orientation, provided by Martin de Vivies, French Southern Territories (AMS) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "ams/best-avail/PT1S/diff",
    "title" : "Best-avail second data in DIFF orientation, provided by Martin de Vivies, French Southern Territories (AMS) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "api/adjusted/PT1M/native",
    "title" : "Adjusted minute data in the coordinate system of measurement of the data ('native'), provided by Apia, Western Samoa (API) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "api/adjusted/PT1M/xyzf",
    "title" : "Adjusted minute data in XYZF orientation, provided by Apia, Western Samoa (API) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "api/adjusted/PT1M/hdzf",
    "title" : "Adjusted minute data in HDZF orientation, provided by Apia, Western Samoa (API) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "api/adjusted/PT1M/diff",
    "title" : "Adjusted minute data in DIFF orientation, provided by Apia, Western Samoa (API) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "api/definitive/PT1M/native",
    "title" : "Definitive minute data in the coordinate system of measurement of the data ('native'), provided by Apia, Western Samoa (API) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "api/definitive/PT1M/xyzf",
    "title" : "Definitive minute data in XYZF orientation, provided by Apia, Western Samoa (API) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "api/definitive/PT1M/hdzf",
    "title" : "Definitive minute data in HDZF orientation, provided by Apia, Western Samoa (API) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "api/definitive/PT1M/diff",
    "title" : "Definitive minute data in DIFF orientation, provided by Apia, Western Samoa (API) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "api/quasi-def/PT1M/native",
    "title" : "Quasi-def minute data in the coordinate system of measurement of the data ('native'), provided by Apia, Western Samoa (API) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "api/quasi-def/PT1M/xyzf",
    "title" : "Quasi-def minute data in XYZF orientation, provided by Apia, Western Samoa (API) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "api/quasi-def/PT1M/hdzf",
    "title" : "Quasi-def minute data in HDZF orientation, provided by Apia, Western Samoa (API) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "api/quasi-def/PT1M/diff",
    "title" : "Quasi-def minute data in DIFF orientation, provided by Apia, Western Samoa (API) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "api/reported/PT1M/native",
    "title" : "Reported minute data in the coordinate system of measurement of the data ('native'), provided by Apia, Western Samoa (API) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "api/best-avail/PT1M/native",
    "title" : "Best-avail minute data in the coordinate system of measurement of the data ('native'), provided by Apia, Western Samoa (API) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "api/best-avail/PT1M/xyzf",
    "title" : "Best-avail minute data in XYZF orientation, provided by Apia, Western Samoa (API) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "api/best-avail/PT1M/hdzf",
    "title" : "Best-avail minute data in HDZF orientation, provided by Apia, Western Samoa (API) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "api/best-avail/PT1M/diff",
    "title" : "Best-avail minute data in DIFF orientation, provided by Apia, Western Samoa (API) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "api/adjusted/PT1S/native",
    "title" : "Adjusted second data in the coordinate system of measurement of the data ('native'), provided by Apia, Western Samoa (API) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "api/adjusted/PT1S/xyzf",
    "title" : "Adjusted second data in XYZF orientation, provided by Apia, Western Samoa (API) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "api/adjusted/PT1S/hdzf",
    "title" : "Adjusted second data in HDZF orientation, provided by Apia, Western Samoa (API) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "api/adjusted/PT1S/diff",
    "title" : "Adjusted second data in DIFF orientation, provided by Apia, Western Samoa (API) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "api/reported/PT1S/native",
    "title" : "Reported second data in the coordinate system of measurement of the data ('native'), provided by Apia, Western Samoa (API) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "api/best-avail/PT1S/native",
    "title" : "Best-avail second data in the coordinate system of measurement of the data ('native'), provided by Apia, Western Samoa (API) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "api/best-avail/PT1S/xyzf",
    "title" : "Best-avail second data in XYZF orientation, provided by Apia, Western Samoa (API) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "api/best-avail/PT1S/hdzf",
    "title" : "Best-avail second data in HDZF orientation, provided by Apia, Western Samoa (API) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "api/best-avail/PT1S/diff",
    "title" : "Best-avail second data in DIFF orientation, provided by Apia, Western Samoa (API) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "aqu/definitive/PT1M/native",
    "title" : "Definitive minute data in the coordinate system of measurement of the data ('native'), provided by L'Aquila, Italy (AQU) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "aqu/definitive/PT1M/xyzf",
    "title" : "Definitive minute data in XYZF orientation, provided by L'Aquila, Italy (AQU) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "aqu/definitive/PT1M/hdzf",
    "title" : "Definitive minute data in HDZF orientation, provided by L'Aquila, Italy (AQU) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "aqu/definitive/PT1M/diff",
    "title" : "Definitive minute data in DIFF orientation, provided by L'Aquila, Italy (AQU) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "aqu/reported/PT1M/native",
    "title" : "Reported minute data in the coordinate system of measurement of the data ('native'), provided by L'Aquila, Italy (AQU) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "aqu/best-avail/PT1M/native",
    "title" : "Best-avail minute data in the coordinate system of measurement of the data ('native'), provided by L'Aquila, Italy (AQU) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "aqu/best-avail/PT1M/xyzf",
    "title" : "Best-avail minute data in XYZF orientation, provided by L'Aquila, Italy (AQU) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "aqu/best-avail/PT1M/hdzf",
    "title" : "Best-avail minute data in HDZF orientation, provided by L'Aquila, Italy (AQU) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "aqu/best-avail/PT1M/diff",
    "title" : "Best-avail minute data in DIFF orientation, provided by L'Aquila, Italy (AQU) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "ars/adjusted/PT1M/native",
    "title" : "Adjusted minute data in the coordinate system of measurement of the data ('native'), provided by Arti, Russia (ARS) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "ars/adjusted/PT1M/xyzf",
    "title" : "Adjusted minute data in XYZF orientation, provided by Arti, Russia (ARS) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "ars/adjusted/PT1M/hdzf",
    "title" : "Adjusted minute data in HDZF orientation, provided by Arti, Russia (ARS) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "ars/adjusted/PT1M/diff",
    "title" : "Adjusted minute data in DIFF orientation, provided by Arti, Russia (ARS) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "ars/definitive/PT1M/native",
    "title" : "Definitive minute data in the coordinate system of measurement of the data ('native'), provided by Arti, Russia (ARS) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "ars/definitive/PT1M/xyzf",
    "title" : "Definitive minute data in XYZF orientation, provided by Arti, Russia (ARS) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "ars/definitive/PT1M/hdzf",
    "title" : "Definitive minute data in HDZF orientation, provided by Arti, Russia (ARS) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "ars/definitive/PT1M/diff",
    "title" : "Definitive minute data in DIFF orientation, provided by Arti, Russia (ARS) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "ars/quasi-def/PT1M/native",
    "title" : "Quasi-def minute data in the coordinate system of measurement of the data ('native'), provided by Arti, Russia (ARS) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "ars/quasi-def/PT1M/xyzf",
    "title" : "Quasi-def minute data in XYZF orientation, provided by Arti, Russia (ARS) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "ars/quasi-def/PT1M/hdzf",
    "title" : "Quasi-def minute data in HDZF orientation, provided by Arti, Russia (ARS) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "ars/quasi-def/PT1M/diff",
    "title" : "Quasi-def minute data in DIFF orientation, provided by Arti, Russia (ARS) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "ars/reported/PT1M/native",
    "title" : "Reported minute data in the coordinate system of measurement of the data ('native'), provided by Arti, Russia (ARS) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "ars/best-avail/PT1M/native",
    "title" : "Best-avail minute data in the coordinate system of measurement of the data ('native'), provided by Arti, Russia (ARS) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "ars/best-avail/PT1M/xyzf",
    "title" : "Best-avail minute data in XYZF orientation, provided by Arti, Russia (ARS) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "ars/best-avail/PT1M/hdzf",
    "title" : "Best-avail minute data in HDZF orientation, provided by Arti, Russia (ARS) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "ars/best-avail/PT1M/diff",
    "title" : "Best-avail minute data in DIFF orientation, provided by Arti, Russia (ARS) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "asc/adjusted/PT1M/native",
    "title" : "Adjusted minute data in the coordinate system of measurement of the data ('native'), provided by Ascension Island (ASC) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "asc/adjusted/PT1M/xyzf",
    "title" : "Adjusted minute data in XYZF orientation, provided by Ascension Island (ASC) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "asc/adjusted/PT1M/hdzf",
    "title" : "Adjusted minute data in HDZF orientation, provided by Ascension Island (ASC) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "asc/adjusted/PT1M/diff",
    "title" : "Adjusted minute data in DIFF orientation, provided by Ascension Island (ASC) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "asc/definitive/PT1M/native",
    "title" : "Definitive minute data in the coordinate system of measurement of the data ('native'), provided by Ascension Island (ASC) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "asc/definitive/PT1M/xyzf",
    "title" : "Definitive minute data in XYZF orientation, provided by Ascension Island (ASC) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "asc/definitive/PT1M/hdzf",
    "title" : "Definitive minute data in HDZF orientation, provided by Ascension Island (ASC) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "asc/definitive/PT1M/diff",
    "title" : "Definitive minute data in DIFF orientation, provided by Ascension Island (ASC) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "asc/quasi-def/PT1M/native",
    "title" : "Quasi-def minute data in the coordinate system of measurement of the data ('native'), provided by Ascension Island (ASC) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "asc/quasi-def/PT1M/xyzf",
    "title" : "Quasi-def minute data in XYZF orientation, provided by Ascension Island (ASC) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "asc/quasi-def/PT1M/hdzf",
    "title" : "Quasi-def minute data in HDZF orientation, provided by Ascension Island (ASC) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "asc/quasi-def/PT1M/diff",
    "title" : "Quasi-def minute data in DIFF orientation, provided by Ascension Island (ASC) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "asc/reported/PT1M/native",
    "title" : "Reported minute data in the coordinate system of measurement of the data ('native'), provided by Ascension Island (ASC) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "asc/best-avail/PT1M/native",
    "title" : "Best-avail minute data in the coordinate system of measurement of the data ('native'), provided by Ascension Island (ASC) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "asc/best-avail/PT1M/xyzf",
    "title" : "Best-avail minute data in XYZF orientation, provided by Ascension Island (ASC) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "asc/best-avail/PT1M/hdzf",
    "title" : "Best-avail minute data in HDZF orientation, provided by Ascension Island (ASC) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "asc/best-avail/PT1M/diff",
    "title" : "Best-avail minute data in DIFF orientation, provided by Ascension Island (ASC) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "asc/adjusted/PT1S/native",
    "title" : "Adjusted second data in the coordinate system of measurement of the data ('native'), provided by Ascension Island (ASC) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "asc/adjusted/PT1S/xyzf",
    "title" : "Adjusted second data in XYZF orientation, provided by Ascension Island (ASC) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "asc/adjusted/PT1S/hdzf",
    "title" : "Adjusted second data in HDZF orientation, provided by Ascension Island (ASC) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "asc/adjusted/PT1S/diff",
    "title" : "Adjusted second data in DIFF orientation, provided by Ascension Island (ASC) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "asc/quasi-def/PT1S/native",
    "title" : "Quasi-def second data in the coordinate system of measurement of the data ('native'), provided by Ascension Island (ASC) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "asc/quasi-def/PT1S/xyzf",
    "title" : "Quasi-def second data in XYZF orientation, provided by Ascension Island (ASC) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "asc/quasi-def/PT1S/hdzf",
    "title" : "Quasi-def second data in HDZF orientation, provided by Ascension Island (ASC) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "asc/quasi-def/PT1S/diff",
    "title" : "Quasi-def second data in DIFF orientation, provided by Ascension Island (ASC) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "asc/best-avail/PT1S/native",
    "title" : "Best-avail second data in the coordinate system of measurement of the data ('native'), provided by Ascension Island (ASC) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "asc/best-avail/PT1S/xyzf",
    "title" : "Best-avail second data in XYZF orientation, provided by Ascension Island (ASC) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "asc/best-avail/PT1S/hdzf",
    "title" : "Best-avail second data in HDZF orientation, provided by Ascension Island (ASC) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "asc/best-avail/PT1S/diff",
    "title" : "Best-avail second data in DIFF orientation, provided by Ascension Island (ASC) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "asp/adjusted/PT1M/native",
    "title" : "Adjusted minute data in the coordinate system of measurement of the data ('native'), provided by Alice Springs, Australia (ASP) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "asp/adjusted/PT1M/xyzf",
    "title" : "Adjusted minute data in XYZF orientation, provided by Alice Springs, Australia (ASP) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "asp/adjusted/PT1M/hdzf",
    "title" : "Adjusted minute data in HDZF orientation, provided by Alice Springs, Australia (ASP) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "asp/adjusted/PT1M/diff",
    "title" : "Adjusted minute data in DIFF orientation, provided by Alice Springs, Australia (ASP) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "asp/definitive/PT1M/native",
    "title" : "Definitive minute data in the coordinate system of measurement of the data ('native'), provided by Alice Springs, Australia (ASP) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "asp/definitive/PT1M/xyzf",
    "title" : "Definitive minute data in XYZF orientation, provided by Alice Springs, Australia (ASP) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "asp/definitive/PT1M/hdzf",
    "title" : "Definitive minute data in HDZF orientation, provided by Alice Springs, Australia (ASP) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "asp/definitive/PT1M/diff",
    "title" : "Definitive minute data in DIFF orientation, provided by Alice Springs, Australia (ASP) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "asp/quasi-def/PT1M/native",
    "title" : "Quasi-def minute data in the coordinate system of measurement of the data ('native'), provided by Alice Springs, Australia (ASP) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "asp/quasi-def/PT1M/xyzf",
    "title" : "Quasi-def minute data in XYZF orientation, provided by Alice Springs, Australia (ASP) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "asp/quasi-def/PT1M/hdzf",
    "title" : "Quasi-def minute data in HDZF orientation, provided by Alice Springs, Australia (ASP) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "asp/quasi-def/PT1M/diff",
    "title" : "Quasi-def minute data in DIFF orientation, provided by Alice Springs, Australia (ASP) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "asp/reported/PT1M/native",
    "title" : "Reported minute data in the coordinate system of measurement of the data ('native'), provided by Alice Springs, Australia (ASP) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "asp/best-avail/PT1M/native",
    "title" : "Best-avail minute data in the coordinate system of measurement of the data ('native'), provided by Alice Springs, Australia (ASP) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "asp/best-avail/PT1M/xyzf",
    "title" : "Best-avail minute data in XYZF orientation, provided by Alice Springs, Australia (ASP) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "asp/best-avail/PT1M/hdzf",
    "title" : "Best-avail minute data in HDZF orientation, provided by Alice Springs, Australia (ASP) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "asp/best-avail/PT1M/diff",
    "title" : "Best-avail minute data in DIFF orientation, provided by Alice Springs, Australia (ASP) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "asp/adjusted/PT1S/native",
    "title" : "Adjusted second data in the coordinate system of measurement of the data ('native'), provided by Alice Springs, Australia (ASP) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "asp/adjusted/PT1S/xyzf",
    "title" : "Adjusted second data in XYZF orientation, provided by Alice Springs, Australia (ASP) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "asp/adjusted/PT1S/hdzf",
    "title" : "Adjusted second data in HDZF orientation, provided by Alice Springs, Australia (ASP) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "asp/adjusted/PT1S/diff",
    "title" : "Adjusted second data in DIFF orientation, provided by Alice Springs, Australia (ASP) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "asp/quasi-def/PT1S/native",
    "title" : "Quasi-def second data in the coordinate system of measurement of the data ('native'), provided by Alice Springs, Australia (ASP) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "asp/quasi-def/PT1S/xyzf",
    "title" : "Quasi-def second data in XYZF orientation, provided by Alice Springs, Australia (ASP) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "asp/quasi-def/PT1S/hdzf",
    "title" : "Quasi-def second data in HDZF orientation, provided by Alice Springs, Australia (ASP) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "asp/quasi-def/PT1S/diff",
    "title" : "Quasi-def second data in DIFF orientation, provided by Alice Springs, Australia (ASP) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "asp/reported/PT1S/native",
    "title" : "Reported second data in the coordinate system of measurement of the data ('native'), provided by Alice Springs, Australia (ASP) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "asp/best-avail/PT1S/native",
    "title" : "Best-avail second data in the coordinate system of measurement of the data ('native'), provided by Alice Springs, Australia (ASP) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "asp/best-avail/PT1S/xyzf",
    "title" : "Best-avail second data in XYZF orientation, provided by Alice Springs, Australia (ASP) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "asp/best-avail/PT1S/hdzf",
    "title" : "Best-avail second data in HDZF orientation, provided by Alice Springs, Australia (ASP) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "asp/best-avail/PT1S/diff",
    "title" : "Best-avail second data in DIFF orientation, provided by Alice Springs, Australia (ASP) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "bdv/definitive/PT1M/native",
    "title" : "Definitive minute data in the coordinate system of measurement of the data ('native'), provided by Budkov, Czech Republic (BDV) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "bdv/definitive/PT1M/xyzf",
    "title" : "Definitive minute data in XYZF orientation, provided by Budkov, Czech Republic (BDV) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "bdv/definitive/PT1M/hdzf",
    "title" : "Definitive minute data in HDZF orientation, provided by Budkov, Czech Republic (BDV) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "bdv/definitive/PT1M/diff",
    "title" : "Definitive minute data in DIFF orientation, provided by Budkov, Czech Republic (BDV) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "bdv/quasi-def/PT1M/native",
    "title" : "Quasi-def minute data in the coordinate system of measurement of the data ('native'), provided by Budkov, Czech Republic (BDV) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "bdv/quasi-def/PT1M/xyzf",
    "title" : "Quasi-def minute data in XYZF orientation, provided by Budkov, Czech Republic (BDV) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "bdv/quasi-def/PT1M/hdzf",
    "title" : "Quasi-def minute data in HDZF orientation, provided by Budkov, Czech Republic (BDV) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "bdv/quasi-def/PT1M/diff",
    "title" : "Quasi-def minute data in DIFF orientation, provided by Budkov, Czech Republic (BDV) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "bdv/reported/PT1M/native",
    "title" : "Reported minute data in the coordinate system of measurement of the data ('native'), provided by Budkov, Czech Republic (BDV) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "bdv/best-avail/PT1M/native",
    "title" : "Best-avail minute data in the coordinate system of measurement of the data ('native'), provided by Budkov, Czech Republic (BDV) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "bdv/best-avail/PT1M/xyzf",
    "title" : "Best-avail minute data in XYZF orientation, provided by Budkov, Czech Republic (BDV) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "bdv/best-avail/PT1M/hdzf",
    "title" : "Best-avail minute data in HDZF orientation, provided by Budkov, Czech Republic (BDV) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "bdv/best-avail/PT1M/diff",
    "title" : "Best-avail minute data in DIFF orientation, provided by Budkov, Czech Republic (BDV) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "bdv/definitive/PT1S/native",
    "title" : "Definitive second data in the coordinate system of measurement of the data ('native'), provided by Budkov, Czech Republic (BDV) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "bdv/definitive/PT1S/xyzf",
    "title" : "Definitive second data in XYZF orientation, provided by Budkov, Czech Republic (BDV) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "bdv/definitive/PT1S/hdzf",
    "title" : "Definitive second data in HDZF orientation, provided by Budkov, Czech Republic (BDV) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "bdv/definitive/PT1S/diff",
    "title" : "Definitive second data in DIFF orientation, provided by Budkov, Czech Republic (BDV) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "bdv/quasi-def/PT1S/native",
    "title" : "Quasi-def second data in the coordinate system of measurement of the data ('native'), provided by Budkov, Czech Republic (BDV) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "bdv/quasi-def/PT1S/xyzf",
    "title" : "Quasi-def second data in XYZF orientation, provided by Budkov, Czech Republic (BDV) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "bdv/quasi-def/PT1S/hdzf",
    "title" : "Quasi-def second data in HDZF orientation, provided by Budkov, Czech Republic (BDV) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "bdv/quasi-def/PT1S/diff",
    "title" : "Quasi-def second data in DIFF orientation, provided by Budkov, Czech Republic (BDV) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "bdv/reported/PT1S/native",
    "title" : "Reported second data in the coordinate system of measurement of the data ('native'), provided by Budkov, Czech Republic (BDV) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "bdv/best-avail/PT1S/native",
    "title" : "Best-avail second data in the coordinate system of measurement of the data ('native'), provided by Budkov, Czech Republic (BDV) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "bdv/best-avail/PT1S/xyzf",
    "title" : "Best-avail second data in XYZF orientation, provided by Budkov, Czech Republic (BDV) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "bdv/best-avail/PT1S/hdzf",
    "title" : "Best-avail second data in HDZF orientation, provided by Budkov, Czech Republic (BDV) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "bdv/best-avail/PT1S/diff",
    "title" : "Best-avail second data in DIFF orientation, provided by Budkov, Czech Republic (BDV) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "bel/adjusted/PT1M/native",
    "title" : "Adjusted minute data in the coordinate system of measurement of the data ('native'), provided by Belsk, Poland (BEL) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "bel/adjusted/PT1M/xyzf",
    "title" : "Adjusted minute data in XYZF orientation, provided by Belsk, Poland (BEL) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "bel/adjusted/PT1M/hdzf",
    "title" : "Adjusted minute data in HDZF orientation, provided by Belsk, Poland (BEL) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "bel/adjusted/PT1M/diff",
    "title" : "Adjusted minute data in DIFF orientation, provided by Belsk, Poland (BEL) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "bel/definitive/PT1M/native",
    "title" : "Definitive minute data in the coordinate system of measurement of the data ('native'), provided by Belsk, Poland (BEL) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "bel/definitive/PT1M/xyzf",
    "title" : "Definitive minute data in XYZF orientation, provided by Belsk, Poland (BEL) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "bel/definitive/PT1M/hdzf",
    "title" : "Definitive minute data in HDZF orientation, provided by Belsk, Poland (BEL) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "bel/definitive/PT1M/diff",
    "title" : "Definitive minute data in DIFF orientation, provided by Belsk, Poland (BEL) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "bel/quasi-def/PT1M/native",
    "title" : "Quasi-def minute data in the coordinate system of measurement of the data ('native'), provided by Belsk, Poland (BEL) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "bel/quasi-def/PT1M/xyzf",
    "title" : "Quasi-def minute data in XYZF orientation, provided by Belsk, Poland (BEL) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "bel/quasi-def/PT1M/hdzf",
    "title" : "Quasi-def minute data in HDZF orientation, provided by Belsk, Poland (BEL) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "bel/quasi-def/PT1M/diff",
    "title" : "Quasi-def minute data in DIFF orientation, provided by Belsk, Poland (BEL) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "bel/reported/PT1M/native",
    "title" : "Reported minute data in the coordinate system of measurement of the data ('native'), provided by Belsk, Poland (BEL) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "bel/best-avail/PT1M/native",
    "title" : "Best-avail minute data in the coordinate system of measurement of the data ('native'), provided by Belsk, Poland (BEL) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "bel/best-avail/PT1M/xyzf",
    "title" : "Best-avail minute data in XYZF orientation, provided by Belsk, Poland (BEL) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "bel/best-avail/PT1M/hdzf",
    "title" : "Best-avail minute data in HDZF orientation, provided by Belsk, Poland (BEL) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "bel/best-avail/PT1M/diff",
    "title" : "Best-avail minute data in DIFF orientation, provided by Belsk, Poland (BEL) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "bel/adjusted/PT1S/native",
    "title" : "Adjusted second data in the coordinate system of measurement of the data ('native'), provided by Belsk, Poland (BEL) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "bel/adjusted/PT1S/xyzf",
    "title" : "Adjusted second data in XYZF orientation, provided by Belsk, Poland (BEL) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "bel/adjusted/PT1S/hdzf",
    "title" : "Adjusted second data in HDZF orientation, provided by Belsk, Poland (BEL) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "bel/adjusted/PT1S/diff",
    "title" : "Adjusted second data in DIFF orientation, provided by Belsk, Poland (BEL) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "bel/reported/PT1S/native",
    "title" : "Reported second data in the coordinate system of measurement of the data ('native'), provided by Belsk, Poland (BEL) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "bel/best-avail/PT1S/native",
    "title" : "Best-avail second data in the coordinate system of measurement of the data ('native'), provided by Belsk, Poland (BEL) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "bel/best-avail/PT1S/xyzf",
    "title" : "Best-avail second data in XYZF orientation, provided by Belsk, Poland (BEL) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "bel/best-avail/PT1S/hdzf",
    "title" : "Best-avail second data in HDZF orientation, provided by Belsk, Poland (BEL) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "bel/best-avail/PT1S/diff",
    "title" : "Best-avail second data in DIFF orientation, provided by Belsk, Poland (BEL) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "bfe/adjusted/PT1M/native",
    "title" : "Adjusted minute data in the coordinate system of measurement of the data ('native'), provided by Brorfelde, Denmark (BFE) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "bfe/adjusted/PT1M/xyzf",
    "title" : "Adjusted minute data in XYZF orientation, provided by Brorfelde, Denmark (BFE) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "bfe/adjusted/PT1M/hdzf",
    "title" : "Adjusted minute data in HDZF orientation, provided by Brorfelde, Denmark (BFE) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "bfe/adjusted/PT1M/diff",
    "title" : "Adjusted minute data in DIFF orientation, provided by Brorfelde, Denmark (BFE) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "bfe/definitive/PT1M/native",
    "title" : "Definitive minute data in the coordinate system of measurement of the data ('native'), provided by Brorfelde, Denmark (BFE) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "bfe/definitive/PT1M/xyzf",
    "title" : "Definitive minute data in XYZF orientation, provided by Brorfelde, Denmark (BFE) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "bfe/definitive/PT1M/hdzf",
    "title" : "Definitive minute data in HDZF orientation, provided by Brorfelde, Denmark (BFE) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "bfe/definitive/PT1M/diff",
    "title" : "Definitive minute data in DIFF orientation, provided by Brorfelde, Denmark (BFE) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "bfe/reported/PT1M/native",
    "title" : "Reported minute data in the coordinate system of measurement of the data ('native'), provided by Brorfelde, Denmark (BFE) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "bfe/best-avail/PT1M/native",
    "title" : "Best-avail minute data in the coordinate system of measurement of the data ('native'), provided by Brorfelde, Denmark (BFE) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "bfe/best-avail/PT1M/xyzf",
    "title" : "Best-avail minute data in XYZF orientation, provided by Brorfelde, Denmark (BFE) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "bfe/best-avail/PT1M/hdzf",
    "title" : "Best-avail minute data in HDZF orientation, provided by Brorfelde, Denmark (BFE) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "bfe/best-avail/PT1M/diff",
    "title" : "Best-avail minute data in DIFF orientation, provided by Brorfelde, Denmark (BFE) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "bfo/adjusted/PT1M/native",
    "title" : "Adjusted minute data in the coordinate system of measurement of the data ('native'), provided by Black Forest Observatory, Germany (BFO) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "bfo/adjusted/PT1M/xyzf",
    "title" : "Adjusted minute data in XYZF orientation, provided by Black Forest Observatory, Germany (BFO) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "bfo/adjusted/PT1M/hdzf",
    "title" : "Adjusted minute data in HDZF orientation, provided by Black Forest Observatory, Germany (BFO) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "bfo/adjusted/PT1M/diff",
    "title" : "Adjusted minute data in DIFF orientation, provided by Black Forest Observatory, Germany (BFO) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "bfo/definitive/PT1M/native",
    "title" : "Definitive minute data in the coordinate system of measurement of the data ('native'), provided by Black Forest Observatory, Germany (BFO) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "bfo/definitive/PT1M/xyzf",
    "title" : "Definitive minute data in XYZF orientation, provided by Black Forest Observatory, Germany (BFO) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "bfo/definitive/PT1M/hdzf",
    "title" : "Definitive minute data in HDZF orientation, provided by Black Forest Observatory, Germany (BFO) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "bfo/definitive/PT1M/diff",
    "title" : "Definitive minute data in DIFF orientation, provided by Black Forest Observatory, Germany (BFO) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "bfo/quasi-def/PT1M/native",
    "title" : "Quasi-def minute data in the coordinate system of measurement of the data ('native'), provided by Black Forest Observatory, Germany (BFO) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "bfo/quasi-def/PT1M/xyzf",
    "title" : "Quasi-def minute data in XYZF orientation, provided by Black Forest Observatory, Germany (BFO) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "bfo/quasi-def/PT1M/hdzf",
    "title" : "Quasi-def minute data in HDZF orientation, provided by Black Forest Observatory, Germany (BFO) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "bfo/quasi-def/PT1M/diff",
    "title" : "Quasi-def minute data in DIFF orientation, provided by Black Forest Observatory, Germany (BFO) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "bfo/reported/PT1M/native",
    "title" : "Reported minute data in the coordinate system of measurement of the data ('native'), provided by Black Forest Observatory, Germany (BFO) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "bfo/best-avail/PT1M/native",
    "title" : "Best-avail minute data in the coordinate system of measurement of the data ('native'), provided by Black Forest Observatory, Germany (BFO) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "bfo/best-avail/PT1M/xyzf",
    "title" : "Best-avail minute data in XYZF orientation, provided by Black Forest Observatory, Germany (BFO) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "bfo/best-avail/PT1M/hdzf",
    "title" : "Best-avail minute data in HDZF orientation, provided by Black Forest Observatory, Germany (BFO) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "bfo/best-avail/PT1M/diff",
    "title" : "Best-avail minute data in DIFF orientation, provided by Black Forest Observatory, Germany (BFO) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "bfo/adjusted/PT1S/native",
    "title" : "Adjusted second data in the coordinate system of measurement of the data ('native'), provided by Black Forest Observatory, Germany (BFO) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "bfo/adjusted/PT1S/xyzf",
    "title" : "Adjusted second data in XYZF orientation, provided by Black Forest Observatory, Germany (BFO) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "bfo/adjusted/PT1S/hdzf",
    "title" : "Adjusted second data in HDZF orientation, provided by Black Forest Observatory, Germany (BFO) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "bfo/adjusted/PT1S/diff",
    "title" : "Adjusted second data in DIFF orientation, provided by Black Forest Observatory, Germany (BFO) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "bfo/quasi-def/PT1S/native",
    "title" : "Quasi-def second data in the coordinate system of measurement of the data ('native'), provided by Black Forest Observatory, Germany (BFO) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "bfo/quasi-def/PT1S/xyzf",
    "title" : "Quasi-def second data in XYZF orientation, provided by Black Forest Observatory, Germany (BFO) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "bfo/quasi-def/PT1S/hdzf",
    "title" : "Quasi-def second data in HDZF orientation, provided by Black Forest Observatory, Germany (BFO) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "bfo/quasi-def/PT1S/diff",
    "title" : "Quasi-def second data in DIFF orientation, provided by Black Forest Observatory, Germany (BFO) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "bfo/best-avail/PT1S/native",
    "title" : "Best-avail second data in the coordinate system of measurement of the data ('native'), provided by Black Forest Observatory, Germany (BFO) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "bfo/best-avail/PT1S/xyzf",
    "title" : "Best-avail second data in XYZF orientation, provided by Black Forest Observatory, Germany (BFO) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "bfo/best-avail/PT1S/hdzf",
    "title" : "Best-avail second data in HDZF orientation, provided by Black Forest Observatory, Germany (BFO) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "bfo/best-avail/PT1S/diff",
    "title" : "Best-avail second data in DIFF orientation, provided by Black Forest Observatory, Germany (BFO) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "blc/definitive/PT1M/native",
    "title" : "Definitive minute data in the coordinate system of measurement of the data ('native'), provided by Baker Lake, Canada (BLC) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "blc/definitive/PT1M/xyzf",
    "title" : "Definitive minute data in XYZF orientation, provided by Baker Lake, Canada (BLC) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "blc/definitive/PT1M/hdzf",
    "title" : "Definitive minute data in HDZF orientation, provided by Baker Lake, Canada (BLC) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "blc/definitive/PT1M/diff",
    "title" : "Definitive minute data in DIFF orientation, provided by Baker Lake, Canada (BLC) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "blc/reported/PT1M/native",
    "title" : "Reported minute data in the coordinate system of measurement of the data ('native'), provided by Baker Lake, Canada (BLC) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "blc/best-avail/PT1M/native",
    "title" : "Best-avail minute data in the coordinate system of measurement of the data ('native'), provided by Baker Lake, Canada (BLC) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "blc/best-avail/PT1M/xyzf",
    "title" : "Best-avail minute data in XYZF orientation, provided by Baker Lake, Canada (BLC) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "blc/best-avail/PT1M/hdzf",
    "title" : "Best-avail minute data in HDZF orientation, provided by Baker Lake, Canada (BLC) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "blc/best-avail/PT1M/diff",
    "title" : "Best-avail minute data in DIFF orientation, provided by Baker Lake, Canada (BLC) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "blc/reported/PT1S/native",
    "title" : "Reported second data in the coordinate system of measurement of the data ('native'), provided by Baker Lake, Canada (BLC) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "blc/best-avail/PT1S/native",
    "title" : "Best-avail second data in the coordinate system of measurement of the data ('native'), provided by Baker Lake, Canada (BLC) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "blc/best-avail/PT1S/xyzf",
    "title" : "Best-avail second data in XYZF orientation, provided by Baker Lake, Canada (BLC) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "blc/best-avail/PT1S/hdzf",
    "title" : "Best-avail second data in HDZF orientation, provided by Baker Lake, Canada (BLC) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "blc/best-avail/PT1S/diff",
    "title" : "Best-avail second data in DIFF orientation, provided by Baker Lake, Canada (BLC) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "bmt/definitive/PT1M/native",
    "title" : "Definitive minute data in the coordinate system of measurement of the data ('native'), provided by Beijing Ming Tombs, China (BMT) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "bmt/definitive/PT1M/xyzf",
    "title" : "Definitive minute data in XYZF orientation, provided by Beijing Ming Tombs, China (BMT) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "bmt/definitive/PT1M/hdzf",
    "title" : "Definitive minute data in HDZF orientation, provided by Beijing Ming Tombs, China (BMT) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "bmt/definitive/PT1M/diff",
    "title" : "Definitive minute data in DIFF orientation, provided by Beijing Ming Tombs, China (BMT) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "bmt/reported/PT1M/native",
    "title" : "Reported minute data in the coordinate system of measurement of the data ('native'), provided by Beijing Ming Tombs, China (BMT) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "bmt/best-avail/PT1M/native",
    "title" : "Best-avail minute data in the coordinate system of measurement of the data ('native'), provided by Beijing Ming Tombs, China (BMT) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "bmt/best-avail/PT1M/xyzf",
    "title" : "Best-avail minute data in XYZF orientation, provided by Beijing Ming Tombs, China (BMT) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "bmt/best-avail/PT1M/hdzf",
    "title" : "Best-avail minute data in HDZF orientation, provided by Beijing Ming Tombs, China (BMT) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "bmt/best-avail/PT1M/diff",
    "title" : "Best-avail minute data in DIFF orientation, provided by Beijing Ming Tombs, China (BMT) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "bng/definitive/PT1M/native",
    "title" : "Definitive minute data in the coordinate system of measurement of the data ('native'), provided by Bangui, Central African Republic (BNG) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "bng/definitive/PT1M/xyzf",
    "title" : "Definitive minute data in XYZF orientation, provided by Bangui, Central African Republic (BNG) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "bng/definitive/PT1M/hdzf",
    "title" : "Definitive minute data in HDZF orientation, provided by Bangui, Central African Republic (BNG) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "bng/definitive/PT1M/diff",
    "title" : "Definitive minute data in DIFF orientation, provided by Bangui, Central African Republic (BNG) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "bng/reported/PT1M/native",
    "title" : "Reported minute data in the coordinate system of measurement of the data ('native'), provided by Bangui, Central African Republic (BNG) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "bng/best-avail/PT1M/native",
    "title" : "Best-avail minute data in the coordinate system of measurement of the data ('native'), provided by Bangui, Central African Republic (BNG) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "bng/best-avail/PT1M/xyzf",
    "title" : "Best-avail minute data in XYZF orientation, provided by Bangui, Central African Republic (BNG) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "bng/best-avail/PT1M/hdzf",
    "title" : "Best-avail minute data in HDZF orientation, provided by Bangui, Central African Republic (BNG) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "bng/best-avail/PT1M/diff",
    "title" : "Best-avail minute data in DIFF orientation, provided by Bangui, Central African Republic (BNG) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "bou/adjusted/PT1M/native",
    "title" : "Adjusted minute data in the coordinate system of measurement of the data ('native'), provided by Boulder, USA (BOU) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "bou/adjusted/PT1M/xyzf",
    "title" : "Adjusted minute data in XYZF orientation, provided by Boulder, USA (BOU) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "bou/adjusted/PT1M/hdzf",
    "title" : "Adjusted minute data in HDZF orientation, provided by Boulder, USA (BOU) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "bou/adjusted/PT1M/diff",
    "title" : "Adjusted minute data in DIFF orientation, provided by Boulder, USA (BOU) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "bou/definitive/PT1M/native",
    "title" : "Definitive minute data in the coordinate system of measurement of the data ('native'), provided by Boulder, USA (BOU) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "bou/definitive/PT1M/xyzf",
    "title" : "Definitive minute data in XYZF orientation, provided by Boulder, USA (BOU) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "bou/definitive/PT1M/hdzf",
    "title" : "Definitive minute data in HDZF orientation, provided by Boulder, USA (BOU) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "bou/definitive/PT1M/diff",
    "title" : "Definitive minute data in DIFF orientation, provided by Boulder, USA (BOU) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "bou/quasi-def/PT1M/native",
    "title" : "Quasi-def minute data in the coordinate system of measurement of the data ('native'), provided by Boulder, USA (BOU) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "bou/quasi-def/PT1M/xyzf",
    "title" : "Quasi-def minute data in XYZF orientation, provided by Boulder, USA (BOU) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "bou/quasi-def/PT1M/hdzf",
    "title" : "Quasi-def minute data in HDZF orientation, provided by Boulder, USA (BOU) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "bou/quasi-def/PT1M/diff",
    "title" : "Quasi-def minute data in DIFF orientation, provided by Boulder, USA (BOU) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "bou/reported/PT1M/native",
    "title" : "Reported minute data in the coordinate system of measurement of the data ('native'), provided by Boulder, USA (BOU) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "bou/best-avail/PT1M/native",
    "title" : "Best-avail minute data in the coordinate system of measurement of the data ('native'), provided by Boulder, USA (BOU) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "bou/best-avail/PT1M/xyzf",
    "title" : "Best-avail minute data in XYZF orientation, provided by Boulder, USA (BOU) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "bou/best-avail/PT1M/hdzf",
    "title" : "Best-avail minute data in HDZF orientation, provided by Boulder, USA (BOU) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "bou/best-avail/PT1M/diff",
    "title" : "Best-avail minute data in DIFF orientation, provided by Boulder, USA (BOU) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "bou/adjusted/PT1S/native",
    "title" : "Adjusted second data in the coordinate system of measurement of the data ('native'), provided by Boulder, USA (BOU) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "bou/adjusted/PT1S/xyzf",
    "title" : "Adjusted second data in XYZF orientation, provided by Boulder, USA (BOU) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "bou/adjusted/PT1S/hdzf",
    "title" : "Adjusted second data in HDZF orientation, provided by Boulder, USA (BOU) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "bou/adjusted/PT1S/diff",
    "title" : "Adjusted second data in DIFF orientation, provided by Boulder, USA (BOU) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "bou/reported/PT1S/native",
    "title" : "Reported second data in the coordinate system of measurement of the data ('native'), provided by Boulder, USA (BOU) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "bou/best-avail/PT1S/native",
    "title" : "Best-avail second data in the coordinate system of measurement of the data ('native'), provided by Boulder, USA (BOU) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "bou/best-avail/PT1S/xyzf",
    "title" : "Best-avail second data in XYZF orientation, provided by Boulder, USA (BOU) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "bou/best-avail/PT1S/hdzf",
    "title" : "Best-avail second data in HDZF orientation, provided by Boulder, USA (BOU) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "bou/best-avail/PT1S/diff",
    "title" : "Best-avail second data in DIFF orientation, provided by Boulder, USA (BOU) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "box/definitive/PT1M/native",
    "title" : "Definitive minute data in the coordinate system of measurement of the data ('native'), provided by Borok, Russia (BOX) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "box/definitive/PT1M/xyzf",
    "title" : "Definitive minute data in XYZF orientation, provided by Borok, Russia (BOX) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "box/definitive/PT1M/hdzf",
    "title" : "Definitive minute data in HDZF orientation, provided by Borok, Russia (BOX) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "box/definitive/PT1M/diff",
    "title" : "Definitive minute data in DIFF orientation, provided by Borok, Russia (BOX) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "box/quasi-def/PT1M/native",
    "title" : "Quasi-def minute data in the coordinate system of measurement of the data ('native'), provided by Borok, Russia (BOX) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "box/quasi-def/PT1M/xyzf",
    "title" : "Quasi-def minute data in XYZF orientation, provided by Borok, Russia (BOX) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "box/quasi-def/PT1M/hdzf",
    "title" : "Quasi-def minute data in HDZF orientation, provided by Borok, Russia (BOX) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "box/quasi-def/PT1M/diff",
    "title" : "Quasi-def minute data in DIFF orientation, provided by Borok, Russia (BOX) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "box/reported/PT1M/native",
    "title" : "Reported minute data in the coordinate system of measurement of the data ('native'), provided by Borok, Russia (BOX) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "box/best-avail/PT1M/native",
    "title" : "Best-avail minute data in the coordinate system of measurement of the data ('native'), provided by Borok, Russia (BOX) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "box/best-avail/PT1M/xyzf",
    "title" : "Best-avail minute data in XYZF orientation, provided by Borok, Russia (BOX) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "box/best-avail/PT1M/hdzf",
    "title" : "Best-avail minute data in HDZF orientation, provided by Borok, Russia (BOX) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "box/best-avail/PT1M/diff",
    "title" : "Best-avail minute data in DIFF orientation, provided by Borok, Russia (BOX) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "box/quasi-def/PT1S/native",
    "title" : "Quasi-def second data in the coordinate system of measurement of the data ('native'), provided by Borok, Russia (BOX) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "box/quasi-def/PT1S/xyzf",
    "title" : "Quasi-def second data in XYZF orientation, provided by Borok, Russia (BOX) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "box/quasi-def/PT1S/hdzf",
    "title" : "Quasi-def second data in HDZF orientation, provided by Borok, Russia (BOX) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "box/quasi-def/PT1S/diff",
    "title" : "Quasi-def second data in DIFF orientation, provided by Borok, Russia (BOX) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "box/reported/PT1S/native",
    "title" : "Reported second data in the coordinate system of measurement of the data ('native'), provided by Borok, Russia (BOX) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "box/best-avail/PT1S/native",
    "title" : "Best-avail second data in the coordinate system of measurement of the data ('native'), provided by Borok, Russia (BOX) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "box/best-avail/PT1S/xyzf",
    "title" : "Best-avail second data in XYZF orientation, provided by Borok, Russia (BOX) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "box/best-avail/PT1S/hdzf",
    "title" : "Best-avail second data in HDZF orientation, provided by Borok, Russia (BOX) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "box/best-avail/PT1S/diff",
    "title" : "Best-avail second data in DIFF orientation, provided by Borok, Russia (BOX) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "brd/definitive/PT1M/native",
    "title" : "Definitive minute data in the coordinate system of measurement of the data ('native'), provided by Brandon, Canada (BRD) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "brd/definitive/PT1M/xyzf",
    "title" : "Definitive minute data in XYZF orientation, provided by Brandon, Canada (BRD) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "brd/definitive/PT1M/hdzf",
    "title" : "Definitive minute data in HDZF orientation, provided by Brandon, Canada (BRD) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "brd/definitive/PT1M/diff",
    "title" : "Definitive minute data in DIFF orientation, provided by Brandon, Canada (BRD) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "brd/reported/PT1M/native",
    "title" : "Reported minute data in the coordinate system of measurement of the data ('native'), provided by Brandon, Canada (BRD) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "brd/best-avail/PT1M/native",
    "title" : "Best-avail minute data in the coordinate system of measurement of the data ('native'), provided by Brandon, Canada (BRD) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "brd/best-avail/PT1M/xyzf",
    "title" : "Best-avail minute data in XYZF orientation, provided by Brandon, Canada (BRD) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "brd/best-avail/PT1M/hdzf",
    "title" : "Best-avail minute data in HDZF orientation, provided by Brandon, Canada (BRD) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "brd/best-avail/PT1M/diff",
    "title" : "Best-avail minute data in DIFF orientation, provided by Brandon, Canada (BRD) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "brd/reported/PT1S/native",
    "title" : "Reported second data in the coordinate system of measurement of the data ('native'), provided by Brandon, Canada (BRD) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "brd/best-avail/PT1S/native",
    "title" : "Best-avail second data in the coordinate system of measurement of the data ('native'), provided by Brandon, Canada (BRD) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "brd/best-avail/PT1S/xyzf",
    "title" : "Best-avail second data in XYZF orientation, provided by Brandon, Canada (BRD) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "brd/best-avail/PT1S/hdzf",
    "title" : "Best-avail second data in HDZF orientation, provided by Brandon, Canada (BRD) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "brd/best-avail/PT1S/diff",
    "title" : "Best-avail second data in DIFF orientation, provided by Brandon, Canada (BRD) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "brw/adjusted/PT1M/native",
    "title" : "Adjusted minute data in the coordinate system of measurement of the data ('native'), provided by Barrow, USA (BRW) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "brw/adjusted/PT1M/xyzf",
    "title" : "Adjusted minute data in XYZF orientation, provided by Barrow, USA (BRW) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "brw/adjusted/PT1M/hdzf",
    "title" : "Adjusted minute data in HDZF orientation, provided by Barrow, USA (BRW) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "brw/adjusted/PT1M/diff",
    "title" : "Adjusted minute data in DIFF orientation, provided by Barrow, USA (BRW) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "brw/definitive/PT1M/native",
    "title" : "Definitive minute data in the coordinate system of measurement of the data ('native'), provided by Barrow, USA (BRW) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "brw/definitive/PT1M/xyzf",
    "title" : "Definitive minute data in XYZF orientation, provided by Barrow, USA (BRW) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "brw/definitive/PT1M/hdzf",
    "title" : "Definitive minute data in HDZF orientation, provided by Barrow, USA (BRW) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "brw/definitive/PT1M/diff",
    "title" : "Definitive minute data in DIFF orientation, provided by Barrow, USA (BRW) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "brw/quasi-def/PT1M/native",
    "title" : "Quasi-def minute data in the coordinate system of measurement of the data ('native'), provided by Barrow, USA (BRW) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "brw/quasi-def/PT1M/xyzf",
    "title" : "Quasi-def minute data in XYZF orientation, provided by Barrow, USA (BRW) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "brw/quasi-def/PT1M/hdzf",
    "title" : "Quasi-def minute data in HDZF orientation, provided by Barrow, USA (BRW) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "brw/quasi-def/PT1M/diff",
    "title" : "Quasi-def minute data in DIFF orientation, provided by Barrow, USA (BRW) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "brw/reported/PT1M/native",
    "title" : "Reported minute data in the coordinate system of measurement of the data ('native'), provided by Barrow, USA (BRW) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "brw/best-avail/PT1M/native",
    "title" : "Best-avail minute data in the coordinate system of measurement of the data ('native'), provided by Barrow, USA (BRW) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "brw/best-avail/PT1M/xyzf",
    "title" : "Best-avail minute data in XYZF orientation, provided by Barrow, USA (BRW) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "brw/best-avail/PT1M/hdzf",
    "title" : "Best-avail minute data in HDZF orientation, provided by Barrow, USA (BRW) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "brw/best-avail/PT1M/diff",
    "title" : "Best-avail minute data in DIFF orientation, provided by Barrow, USA (BRW) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "brw/adjusted/PT1S/native",
    "title" : "Adjusted second data in the coordinate system of measurement of the data ('native'), provided by Barrow, USA (BRW) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "brw/adjusted/PT1S/xyzf",
    "title" : "Adjusted second data in XYZF orientation, provided by Barrow, USA (BRW) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "brw/adjusted/PT1S/hdzf",
    "title" : "Adjusted second data in HDZF orientation, provided by Barrow, USA (BRW) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "brw/adjusted/PT1S/diff",
    "title" : "Adjusted second data in DIFF orientation, provided by Barrow, USA (BRW) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "brw/reported/PT1S/native",
    "title" : "Reported second data in the coordinate system of measurement of the data ('native'), provided by Barrow, USA (BRW) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "brw/best-avail/PT1S/native",
    "title" : "Best-avail second data in the coordinate system of measurement of the data ('native'), provided by Barrow, USA (BRW) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "brw/best-avail/PT1S/xyzf",
    "title" : "Best-avail second data in XYZF orientation, provided by Barrow, USA (BRW) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "brw/best-avail/PT1S/hdzf",
    "title" : "Best-avail second data in HDZF orientation, provided by Barrow, USA (BRW) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "brw/best-avail/PT1S/diff",
    "title" : "Best-avail second data in DIFF orientation, provided by Barrow, USA (BRW) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "bsl/adjusted/PT1M/native",
    "title" : "Adjusted minute data in the coordinate system of measurement of the data ('native'), provided by Stennis Space Center, USA (BSL) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "bsl/adjusted/PT1M/xyzf",
    "title" : "Adjusted minute data in XYZF orientation, provided by Stennis Space Center, USA (BSL) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "bsl/adjusted/PT1M/hdzf",
    "title" : "Adjusted minute data in HDZF orientation, provided by Stennis Space Center, USA (BSL) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "bsl/adjusted/PT1M/diff",
    "title" : "Adjusted minute data in DIFF orientation, provided by Stennis Space Center, USA (BSL) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "bsl/definitive/PT1M/native",
    "title" : "Definitive minute data in the coordinate system of measurement of the data ('native'), provided by Stennis Space Center, USA (BSL) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "bsl/definitive/PT1M/xyzf",
    "title" : "Definitive minute data in XYZF orientation, provided by Stennis Space Center, USA (BSL) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "bsl/definitive/PT1M/hdzf",
    "title" : "Definitive minute data in HDZF orientation, provided by Stennis Space Center, USA (BSL) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "bsl/definitive/PT1M/diff",
    "title" : "Definitive minute data in DIFF orientation, provided by Stennis Space Center, USA (BSL) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "bsl/reported/PT1M/native",
    "title" : "Reported minute data in the coordinate system of measurement of the data ('native'), provided by Stennis Space Center, USA (BSL) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "bsl/best-avail/PT1M/native",
    "title" : "Best-avail minute data in the coordinate system of measurement of the data ('native'), provided by Stennis Space Center, USA (BSL) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "bsl/best-avail/PT1M/xyzf",
    "title" : "Best-avail minute data in XYZF orientation, provided by Stennis Space Center, USA (BSL) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "bsl/best-avail/PT1M/hdzf",
    "title" : "Best-avail minute data in HDZF orientation, provided by Stennis Space Center, USA (BSL) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "bsl/best-avail/PT1M/diff",
    "title" : "Best-avail minute data in DIFF orientation, provided by Stennis Space Center, USA (BSL) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "bsl/adjusted/PT1S/native",
    "title" : "Adjusted second data in the coordinate system of measurement of the data ('native'), provided by Stennis Space Center, USA (BSL) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "bsl/adjusted/PT1S/xyzf",
    "title" : "Adjusted second data in XYZF orientation, provided by Stennis Space Center, USA (BSL) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "bsl/adjusted/PT1S/hdzf",
    "title" : "Adjusted second data in HDZF orientation, provided by Stennis Space Center, USA (BSL) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "bsl/adjusted/PT1S/diff",
    "title" : "Adjusted second data in DIFF orientation, provided by Stennis Space Center, USA (BSL) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "bsl/reported/PT1S/native",
    "title" : "Reported second data in the coordinate system of measurement of the data ('native'), provided by Stennis Space Center, USA (BSL) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "bsl/best-avail/PT1S/native",
    "title" : "Best-avail second data in the coordinate system of measurement of the data ('native'), provided by Stennis Space Center, USA (BSL) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "bsl/best-avail/PT1S/xyzf",
    "title" : "Best-avail second data in XYZF orientation, provided by Stennis Space Center, USA (BSL) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "bsl/best-avail/PT1S/hdzf",
    "title" : "Best-avail second data in HDZF orientation, provided by Stennis Space Center, USA (BSL) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "bsl/best-avail/PT1S/diff",
    "title" : "Best-avail second data in DIFF orientation, provided by Stennis Space Center, USA (BSL) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "cbb/definitive/PT1M/native",
    "title" : "Definitive minute data in the coordinate system of measurement of the data ('native'), provided by Cambridge Bay, Canada (CBB) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "cbb/definitive/PT1M/xyzf",
    "title" : "Definitive minute data in XYZF orientation, provided by Cambridge Bay, Canada (CBB) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "cbb/definitive/PT1M/hdzf",
    "title" : "Definitive minute data in HDZF orientation, provided by Cambridge Bay, Canada (CBB) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "cbb/definitive/PT1M/diff",
    "title" : "Definitive minute data in DIFF orientation, provided by Cambridge Bay, Canada (CBB) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "cbb/reported/PT1M/native",
    "title" : "Reported minute data in the coordinate system of measurement of the data ('native'), provided by Cambridge Bay, Canada (CBB) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "cbb/best-avail/PT1M/native",
    "title" : "Best-avail minute data in the coordinate system of measurement of the data ('native'), provided by Cambridge Bay, Canada (CBB) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "cbb/best-avail/PT1M/xyzf",
    "title" : "Best-avail minute data in XYZF orientation, provided by Cambridge Bay, Canada (CBB) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "cbb/best-avail/PT1M/hdzf",
    "title" : "Best-avail minute data in HDZF orientation, provided by Cambridge Bay, Canada (CBB) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "cbb/best-avail/PT1M/diff",
    "title" : "Best-avail minute data in DIFF orientation, provided by Cambridge Bay, Canada (CBB) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "cbb/reported/PT1S/native",
    "title" : "Reported second data in the coordinate system of measurement of the data ('native'), provided by Cambridge Bay, Canada (CBB) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "cbb/best-avail/PT1S/native",
    "title" : "Best-avail second data in the coordinate system of measurement of the data ('native'), provided by Cambridge Bay, Canada (CBB) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "cbb/best-avail/PT1S/xyzf",
    "title" : "Best-avail second data in XYZF orientation, provided by Cambridge Bay, Canada (CBB) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "cbb/best-avail/PT1S/hdzf",
    "title" : "Best-avail second data in HDZF orientation, provided by Cambridge Bay, Canada (CBB) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "cbb/best-avail/PT1S/diff",
    "title" : "Best-avail second data in DIFF orientation, provided by Cambridge Bay, Canada (CBB) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "cki/adjusted/PT1M/native",
    "title" : "Adjusted minute data in the coordinate system of measurement of the data ('native'), provided by Cokos (Keeling) Islands, Australia (CKI) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "cki/adjusted/PT1M/xyzf",
    "title" : "Adjusted minute data in XYZF orientation, provided by Cokos (Keeling) Islands, Australia (CKI) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "cki/adjusted/PT1M/hdzf",
    "title" : "Adjusted minute data in HDZF orientation, provided by Cokos (Keeling) Islands, Australia (CKI) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "cki/adjusted/PT1M/diff",
    "title" : "Adjusted minute data in DIFF orientation, provided by Cokos (Keeling) Islands, Australia (CKI) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "cki/definitive/PT1M/native",
    "title" : "Definitive minute data in the coordinate system of measurement of the data ('native'), provided by Cokos (Keeling) Islands, Australia (CKI) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "cki/definitive/PT1M/xyzf",
    "title" : "Definitive minute data in XYZF orientation, provided by Cokos (Keeling) Islands, Australia (CKI) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "cki/definitive/PT1M/hdzf",
    "title" : "Definitive minute data in HDZF orientation, provided by Cokos (Keeling) Islands, Australia (CKI) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "cki/definitive/PT1M/diff",
    "title" : "Definitive minute data in DIFF orientation, provided by Cokos (Keeling) Islands, Australia (CKI) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "cki/quasi-def/PT1M/native",
    "title" : "Quasi-def minute data in the coordinate system of measurement of the data ('native'), provided by Cokos (Keeling) Islands, Australia (CKI) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "cki/quasi-def/PT1M/xyzf",
    "title" : "Quasi-def minute data in XYZF orientation, provided by Cokos (Keeling) Islands, Australia (CKI) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "cki/quasi-def/PT1M/hdzf",
    "title" : "Quasi-def minute data in HDZF orientation, provided by Cokos (Keeling) Islands, Australia (CKI) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "cki/quasi-def/PT1M/diff",
    "title" : "Quasi-def minute data in DIFF orientation, provided by Cokos (Keeling) Islands, Australia (CKI) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "cki/reported/PT1M/native",
    "title" : "Reported minute data in the coordinate system of measurement of the data ('native'), provided by Cokos (Keeling) Islands, Australia (CKI) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "cki/best-avail/PT1M/native",
    "title" : "Best-avail minute data in the coordinate system of measurement of the data ('native'), provided by Cokos (Keeling) Islands, Australia (CKI) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "cki/best-avail/PT1M/xyzf",
    "title" : "Best-avail minute data in XYZF orientation, provided by Cokos (Keeling) Islands, Australia (CKI) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "cki/best-avail/PT1M/hdzf",
    "title" : "Best-avail minute data in HDZF orientation, provided by Cokos (Keeling) Islands, Australia (CKI) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "cki/best-avail/PT1M/diff",
    "title" : "Best-avail minute data in DIFF orientation, provided by Cokos (Keeling) Islands, Australia (CKI) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "cki/adjusted/PT1S/native",
    "title" : "Adjusted second data in the coordinate system of measurement of the data ('native'), provided by Cokos (Keeling) Islands, Australia (CKI) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "cki/adjusted/PT1S/xyzf",
    "title" : "Adjusted second data in XYZF orientation, provided by Cokos (Keeling) Islands, Australia (CKI) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "cki/adjusted/PT1S/hdzf",
    "title" : "Adjusted second data in HDZF orientation, provided by Cokos (Keeling) Islands, Australia (CKI) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "cki/adjusted/PT1S/diff",
    "title" : "Adjusted second data in DIFF orientation, provided by Cokos (Keeling) Islands, Australia (CKI) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "cki/quasi-def/PT1S/native",
    "title" : "Quasi-def second data in the coordinate system of measurement of the data ('native'), provided by Cokos (Keeling) Islands, Australia (CKI) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "cki/quasi-def/PT1S/xyzf",
    "title" : "Quasi-def second data in XYZF orientation, provided by Cokos (Keeling) Islands, Australia (CKI) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "cki/quasi-def/PT1S/hdzf",
    "title" : "Quasi-def second data in HDZF orientation, provided by Cokos (Keeling) Islands, Australia (CKI) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "cki/quasi-def/PT1S/diff",
    "title" : "Quasi-def second data in DIFF orientation, provided by Cokos (Keeling) Islands, Australia (CKI) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "cki/best-avail/PT1S/native",
    "title" : "Best-avail second data in the coordinate system of measurement of the data ('native'), provided by Cokos (Keeling) Islands, Australia (CKI) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "cki/best-avail/PT1S/xyzf",
    "title" : "Best-avail second data in XYZF orientation, provided by Cokos (Keeling) Islands, Australia (CKI) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "cki/best-avail/PT1S/hdzf",
    "title" : "Best-avail second data in HDZF orientation, provided by Cokos (Keeling) Islands, Australia (CKI) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "cki/best-avail/PT1S/diff",
    "title" : "Best-avail second data in DIFF orientation, provided by Cokos (Keeling) Islands, Australia (CKI) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "clf/definitive/PT1M/native",
    "title" : "Definitive minute data in the coordinate system of measurement of the data ('native'), provided by Chambon la Foret, France (CLF) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "clf/definitive/PT1M/xyzf",
    "title" : "Definitive minute data in XYZF orientation, provided by Chambon la Foret, France (CLF) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "clf/definitive/PT1M/hdzf",
    "title" : "Definitive minute data in HDZF orientation, provided by Chambon la Foret, France (CLF) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "clf/definitive/PT1M/diff",
    "title" : "Definitive minute data in DIFF orientation, provided by Chambon la Foret, France (CLF) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "clf/quasi-def/PT1M/native",
    "title" : "Quasi-def minute data in the coordinate system of measurement of the data ('native'), provided by Chambon la Foret, France (CLF) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "clf/quasi-def/PT1M/xyzf",
    "title" : "Quasi-def minute data in XYZF orientation, provided by Chambon la Foret, France (CLF) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "clf/quasi-def/PT1M/hdzf",
    "title" : "Quasi-def minute data in HDZF orientation, provided by Chambon la Foret, France (CLF) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "clf/quasi-def/PT1M/diff",
    "title" : "Quasi-def minute data in DIFF orientation, provided by Chambon la Foret, France (CLF) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "clf/reported/PT1M/native",
    "title" : "Reported minute data in the coordinate system of measurement of the data ('native'), provided by Chambon la Foret, France (CLF) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "clf/best-avail/PT1M/native",
    "title" : "Best-avail minute data in the coordinate system of measurement of the data ('native'), provided by Chambon la Foret, France (CLF) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "clf/best-avail/PT1M/xyzf",
    "title" : "Best-avail minute data in XYZF orientation, provided by Chambon la Foret, France (CLF) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "clf/best-avail/PT1M/hdzf",
    "title" : "Best-avail minute data in HDZF orientation, provided by Chambon la Foret, France (CLF) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "clf/best-avail/PT1M/diff",
    "title" : "Best-avail minute data in DIFF orientation, provided by Chambon la Foret, France (CLF) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "clf/quasi-def/PT1S/native",
    "title" : "Quasi-def second data in the coordinate system of measurement of the data ('native'), provided by Chambon la Foret, France (CLF) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "clf/quasi-def/PT1S/xyzf",
    "title" : "Quasi-def second data in XYZF orientation, provided by Chambon la Foret, France (CLF) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "clf/quasi-def/PT1S/hdzf",
    "title" : "Quasi-def second data in HDZF orientation, provided by Chambon la Foret, France (CLF) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "clf/quasi-def/PT1S/diff",
    "title" : "Quasi-def second data in DIFF orientation, provided by Chambon la Foret, France (CLF) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "clf/reported/PT1S/native",
    "title" : "Reported second data in the coordinate system of measurement of the data ('native'), provided by Chambon la Foret, France (CLF) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "clf/best-avail/PT1S/native",
    "title" : "Best-avail second data in the coordinate system of measurement of the data ('native'), provided by Chambon la Foret, France (CLF) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "clf/best-avail/PT1S/xyzf",
    "title" : "Best-avail second data in XYZF orientation, provided by Chambon la Foret, France (CLF) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "clf/best-avail/PT1S/hdzf",
    "title" : "Best-avail second data in HDZF orientation, provided by Chambon la Foret, France (CLF) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "clf/best-avail/PT1S/diff",
    "title" : "Best-avail second data in DIFF orientation, provided by Chambon la Foret, France (CLF) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "cmo/adjusted/PT1M/native",
    "title" : "Adjusted minute data in the coordinate system of measurement of the data ('native'), provided by College, USA (CMO) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "cmo/adjusted/PT1M/xyzf",
    "title" : "Adjusted minute data in XYZF orientation, provided by College, USA (CMO) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "cmo/adjusted/PT1M/hdzf",
    "title" : "Adjusted minute data in HDZF orientation, provided by College, USA (CMO) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "cmo/adjusted/PT1M/diff",
    "title" : "Adjusted minute data in DIFF orientation, provided by College, USA (CMO) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "cmo/definitive/PT1M/native",
    "title" : "Definitive minute data in the coordinate system of measurement of the data ('native'), provided by College, USA (CMO) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "cmo/definitive/PT1M/xyzf",
    "title" : "Definitive minute data in XYZF orientation, provided by College, USA (CMO) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "cmo/definitive/PT1M/hdzf",
    "title" : "Definitive minute data in HDZF orientation, provided by College, USA (CMO) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "cmo/definitive/PT1M/diff",
    "title" : "Definitive minute data in DIFF orientation, provided by College, USA (CMO) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "cmo/quasi-def/PT1M/native",
    "title" : "Quasi-def minute data in the coordinate system of measurement of the data ('native'), provided by College, USA (CMO) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "cmo/quasi-def/PT1M/xyzf",
    "title" : "Quasi-def minute data in XYZF orientation, provided by College, USA (CMO) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "cmo/quasi-def/PT1M/hdzf",
    "title" : "Quasi-def minute data in HDZF orientation, provided by College, USA (CMO) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "cmo/quasi-def/PT1M/diff",
    "title" : "Quasi-def minute data in DIFF orientation, provided by College, USA (CMO) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "cmo/reported/PT1M/native",
    "title" : "Reported minute data in the coordinate system of measurement of the data ('native'), provided by College, USA (CMO) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "cmo/best-avail/PT1M/native",
    "title" : "Best-avail minute data in the coordinate system of measurement of the data ('native'), provided by College, USA (CMO) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "cmo/best-avail/PT1M/xyzf",
    "title" : "Best-avail minute data in XYZF orientation, provided by College, USA (CMO) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "cmo/best-avail/PT1M/hdzf",
    "title" : "Best-avail minute data in HDZF orientation, provided by College, USA (CMO) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "cmo/best-avail/PT1M/diff",
    "title" : "Best-avail minute data in DIFF orientation, provided by College, USA (CMO) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "cmo/adjusted/PT1S/native",
    "title" : "Adjusted second data in the coordinate system of measurement of the data ('native'), provided by College, USA (CMO) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "cmo/adjusted/PT1S/xyzf",
    "title" : "Adjusted second data in XYZF orientation, provided by College, USA (CMO) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "cmo/adjusted/PT1S/hdzf",
    "title" : "Adjusted second data in HDZF orientation, provided by College, USA (CMO) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "cmo/adjusted/PT1S/diff",
    "title" : "Adjusted second data in DIFF orientation, provided by College, USA (CMO) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "cmo/reported/PT1S/native",
    "title" : "Reported second data in the coordinate system of measurement of the data ('native'), provided by College, USA (CMO) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "cmo/best-avail/PT1S/native",
    "title" : "Best-avail second data in the coordinate system of measurement of the data ('native'), provided by College, USA (CMO) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "cmo/best-avail/PT1S/xyzf",
    "title" : "Best-avail second data in XYZF orientation, provided by College, USA (CMO) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "cmo/best-avail/PT1S/hdzf",
    "title" : "Best-avail second data in HDZF orientation, provided by College, USA (CMO) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "cmo/best-avail/PT1S/diff",
    "title" : "Best-avail second data in DIFF orientation, provided by College, USA (CMO) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "cnb/adjusted/PT1M/native",
    "title" : "Adjusted minute data in the coordinate system of measurement of the data ('native'), provided by Canberra, Australia (CNB) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "cnb/adjusted/PT1M/xyzf",
    "title" : "Adjusted minute data in XYZF orientation, provided by Canberra, Australia (CNB) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "cnb/adjusted/PT1M/hdzf",
    "title" : "Adjusted minute data in HDZF orientation, provided by Canberra, Australia (CNB) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "cnb/adjusted/PT1M/diff",
    "title" : "Adjusted minute data in DIFF orientation, provided by Canberra, Australia (CNB) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "cnb/definitive/PT1M/native",
    "title" : "Definitive minute data in the coordinate system of measurement of the data ('native'), provided by Canberra, Australia (CNB) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "cnb/definitive/PT1M/xyzf",
    "title" : "Definitive minute data in XYZF orientation, provided by Canberra, Australia (CNB) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "cnb/definitive/PT1M/hdzf",
    "title" : "Definitive minute data in HDZF orientation, provided by Canberra, Australia (CNB) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "cnb/definitive/PT1M/diff",
    "title" : "Definitive minute data in DIFF orientation, provided by Canberra, Australia (CNB) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "cnb/quasi-def/PT1M/native",
    "title" : "Quasi-def minute data in the coordinate system of measurement of the data ('native'), provided by Canberra, Australia (CNB) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "cnb/quasi-def/PT1M/xyzf",
    "title" : "Quasi-def minute data in XYZF orientation, provided by Canberra, Australia (CNB) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "cnb/quasi-def/PT1M/hdzf",
    "title" : "Quasi-def minute data in HDZF orientation, provided by Canberra, Australia (CNB) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "cnb/quasi-def/PT1M/diff",
    "title" : "Quasi-def minute data in DIFF orientation, provided by Canberra, Australia (CNB) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "cnb/reported/PT1M/native",
    "title" : "Reported minute data in the coordinate system of measurement of the data ('native'), provided by Canberra, Australia (CNB) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "cnb/best-avail/PT1M/native",
    "title" : "Best-avail minute data in the coordinate system of measurement of the data ('native'), provided by Canberra, Australia (CNB) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "cnb/best-avail/PT1M/xyzf",
    "title" : "Best-avail minute data in XYZF orientation, provided by Canberra, Australia (CNB) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "cnb/best-avail/PT1M/hdzf",
    "title" : "Best-avail minute data in HDZF orientation, provided by Canberra, Australia (CNB) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "cnb/best-avail/PT1M/diff",
    "title" : "Best-avail minute data in DIFF orientation, provided by Canberra, Australia (CNB) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "cnb/adjusted/PT1S/native",
    "title" : "Adjusted second data in the coordinate system of measurement of the data ('native'), provided by Canberra, Australia (CNB) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "cnb/adjusted/PT1S/xyzf",
    "title" : "Adjusted second data in XYZF orientation, provided by Canberra, Australia (CNB) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "cnb/adjusted/PT1S/hdzf",
    "title" : "Adjusted second data in HDZF orientation, provided by Canberra, Australia (CNB) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "cnb/adjusted/PT1S/diff",
    "title" : "Adjusted second data in DIFF orientation, provided by Canberra, Australia (CNB) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "cnb/quasi-def/PT1S/native",
    "title" : "Quasi-def second data in the coordinate system of measurement of the data ('native'), provided by Canberra, Australia (CNB) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "cnb/quasi-def/PT1S/xyzf",
    "title" : "Quasi-def second data in XYZF orientation, provided by Canberra, Australia (CNB) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "cnb/quasi-def/PT1S/hdzf",
    "title" : "Quasi-def second data in HDZF orientation, provided by Canberra, Australia (CNB) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "cnb/quasi-def/PT1S/diff",
    "title" : "Quasi-def second data in DIFF orientation, provided by Canberra, Australia (CNB) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "cnb/reported/PT1S/native",
    "title" : "Reported second data in the coordinate system of measurement of the data ('native'), provided by Canberra, Australia (CNB) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "cnb/best-avail/PT1S/native",
    "title" : "Best-avail second data in the coordinate system of measurement of the data ('native'), provided by Canberra, Australia (CNB) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "cnb/best-avail/PT1S/xyzf",
    "title" : "Best-avail second data in XYZF orientation, provided by Canberra, Australia (CNB) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "cnb/best-avail/PT1S/hdzf",
    "title" : "Best-avail second data in HDZF orientation, provided by Canberra, Australia (CNB) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "cnb/best-avail/PT1S/diff",
    "title" : "Best-avail second data in DIFF orientation, provided by Canberra, Australia (CNB) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "cnh/adjusted/PT1M/native",
    "title" : "Adjusted minute data in the coordinate system of measurement of the data ('native'), provided by Changchun, China (CNH) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "cnh/adjusted/PT1M/xyzf",
    "title" : "Adjusted minute data in XYZF orientation, provided by Changchun, China (CNH) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "cnh/adjusted/PT1M/hdzf",
    "title" : "Adjusted minute data in HDZF orientation, provided by Changchun, China (CNH) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "cnh/adjusted/PT1M/diff",
    "title" : "Adjusted minute data in DIFF orientation, provided by Changchun, China (CNH) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "cnh/reported/PT1M/native",
    "title" : "Reported minute data in the coordinate system of measurement of the data ('native'), provided by Changchun, China (CNH) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "cnh/best-avail/PT1M/native",
    "title" : "Best-avail minute data in the coordinate system of measurement of the data ('native'), provided by Changchun, China (CNH) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "cnh/best-avail/PT1M/xyzf",
    "title" : "Best-avail minute data in XYZF orientation, provided by Changchun, China (CNH) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "cnh/best-avail/PT1M/hdzf",
    "title" : "Best-avail minute data in HDZF orientation, provided by Changchun, China (CNH) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "cnh/best-avail/PT1M/diff",
    "title" : "Best-avail minute data in DIFF orientation, provided by Changchun, China (CNH) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "cpl/adjusted/PT1M/native",
    "title" : "Adjusted minute data in the coordinate system of measurement of the data ('native'), provided by Choutuppal, India (CPL) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "cpl/adjusted/PT1M/xyzf",
    "title" : "Adjusted minute data in XYZF orientation, provided by Choutuppal, India (CPL) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "cpl/adjusted/PT1M/hdzf",
    "title" : "Adjusted minute data in HDZF orientation, provided by Choutuppal, India (CPL) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "cpl/adjusted/PT1M/diff",
    "title" : "Adjusted minute data in DIFF orientation, provided by Choutuppal, India (CPL) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "cpl/definitive/PT1M/native",
    "title" : "Definitive minute data in the coordinate system of measurement of the data ('native'), provided by Choutuppal, India (CPL) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "cpl/definitive/PT1M/xyzf",
    "title" : "Definitive minute data in XYZF orientation, provided by Choutuppal, India (CPL) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "cpl/definitive/PT1M/hdzf",
    "title" : "Definitive minute data in HDZF orientation, provided by Choutuppal, India (CPL) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "cpl/definitive/PT1M/diff",
    "title" : "Definitive minute data in DIFF orientation, provided by Choutuppal, India (CPL) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "cpl/quasi-def/PT1M/native",
    "title" : "Quasi-def minute data in the coordinate system of measurement of the data ('native'), provided by Choutuppal, India (CPL) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "cpl/quasi-def/PT1M/xyzf",
    "title" : "Quasi-def minute data in XYZF orientation, provided by Choutuppal, India (CPL) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "cpl/quasi-def/PT1M/hdzf",
    "title" : "Quasi-def minute data in HDZF orientation, provided by Choutuppal, India (CPL) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "cpl/quasi-def/PT1M/diff",
    "title" : "Quasi-def minute data in DIFF orientation, provided by Choutuppal, India (CPL) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "cpl/reported/PT1M/native",
    "title" : "Reported minute data in the coordinate system of measurement of the data ('native'), provided by Choutuppal, India (CPL) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "cpl/best-avail/PT1M/native",
    "title" : "Best-avail minute data in the coordinate system of measurement of the data ('native'), provided by Choutuppal, India (CPL) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "cpl/best-avail/PT1M/xyzf",
    "title" : "Best-avail minute data in XYZF orientation, provided by Choutuppal, India (CPL) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "cpl/best-avail/PT1M/hdzf",
    "title" : "Best-avail minute data in HDZF orientation, provided by Choutuppal, India (CPL) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "cpl/best-avail/PT1M/diff",
    "title" : "Best-avail minute data in DIFF orientation, provided by Choutuppal, India (CPL) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "cpl/reported/PT1S/native",
    "title" : "Reported second data in the coordinate system of measurement of the data ('native'), provided by Choutuppal, India (CPL) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "cpl/best-avail/PT1S/native",
    "title" : "Best-avail second data in the coordinate system of measurement of the data ('native'), provided by Choutuppal, India (CPL) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "cpl/best-avail/PT1S/xyzf",
    "title" : "Best-avail second data in XYZF orientation, provided by Choutuppal, India (CPL) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "cpl/best-avail/PT1S/hdzf",
    "title" : "Best-avail second data in HDZF orientation, provided by Choutuppal, India (CPL) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "cpl/best-avail/PT1S/diff",
    "title" : "Best-avail second data in DIFF orientation, provided by Choutuppal, India (CPL) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "csy/adjusted/PT1M/native",
    "title" : "Adjusted minute data in the coordinate system of measurement of the data ('native'), provided by Casey, Australia (CSY) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "csy/adjusted/PT1M/xyzf",
    "title" : "Adjusted minute data in XYZF orientation, provided by Casey, Australia (CSY) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "csy/adjusted/PT1M/hdzf",
    "title" : "Adjusted minute data in HDZF orientation, provided by Casey, Australia (CSY) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "csy/adjusted/PT1M/diff",
    "title" : "Adjusted minute data in DIFF orientation, provided by Casey, Australia (CSY) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "csy/definitive/PT1M/native",
    "title" : "Definitive minute data in the coordinate system of measurement of the data ('native'), provided by Casey, Australia (CSY) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "csy/definitive/PT1M/xyzf",
    "title" : "Definitive minute data in XYZF orientation, provided by Casey, Australia (CSY) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "csy/definitive/PT1M/hdzf",
    "title" : "Definitive minute data in HDZF orientation, provided by Casey, Australia (CSY) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "csy/definitive/PT1M/diff",
    "title" : "Definitive minute data in DIFF orientation, provided by Casey, Australia (CSY) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "csy/quasi-def/PT1M/native",
    "title" : "Quasi-def minute data in the coordinate system of measurement of the data ('native'), provided by Casey, Australia (CSY) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "csy/quasi-def/PT1M/xyzf",
    "title" : "Quasi-def minute data in XYZF orientation, provided by Casey, Australia (CSY) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "csy/quasi-def/PT1M/hdzf",
    "title" : "Quasi-def minute data in HDZF orientation, provided by Casey, Australia (CSY) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "csy/quasi-def/PT1M/diff",
    "title" : "Quasi-def minute data in DIFF orientation, provided by Casey, Australia (CSY) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "csy/reported/PT1M/native",
    "title" : "Reported minute data in the coordinate system of measurement of the data ('native'), provided by Casey, Australia (CSY) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "csy/best-avail/PT1M/native",
    "title" : "Best-avail minute data in the coordinate system of measurement of the data ('native'), provided by Casey, Australia (CSY) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "csy/best-avail/PT1M/xyzf",
    "title" : "Best-avail minute data in XYZF orientation, provided by Casey, Australia (CSY) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "csy/best-avail/PT1M/hdzf",
    "title" : "Best-avail minute data in HDZF orientation, provided by Casey, Australia (CSY) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "csy/best-avail/PT1M/diff",
    "title" : "Best-avail minute data in DIFF orientation, provided by Casey, Australia (CSY) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "csy/adjusted/PT1S/native",
    "title" : "Adjusted second data in the coordinate system of measurement of the data ('native'), provided by Casey, Australia (CSY) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "csy/adjusted/PT1S/xyzf",
    "title" : "Adjusted second data in XYZF orientation, provided by Casey, Australia (CSY) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "csy/adjusted/PT1S/hdzf",
    "title" : "Adjusted second data in HDZF orientation, provided by Casey, Australia (CSY) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "csy/adjusted/PT1S/diff",
    "title" : "Adjusted second data in DIFF orientation, provided by Casey, Australia (CSY) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "csy/quasi-def/PT1S/native",
    "title" : "Quasi-def second data in the coordinate system of measurement of the data ('native'), provided by Casey, Australia (CSY) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "csy/quasi-def/PT1S/xyzf",
    "title" : "Quasi-def second data in XYZF orientation, provided by Casey, Australia (CSY) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "csy/quasi-def/PT1S/hdzf",
    "title" : "Quasi-def second data in HDZF orientation, provided by Casey, Australia (CSY) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "csy/quasi-def/PT1S/diff",
    "title" : "Quasi-def second data in DIFF orientation, provided by Casey, Australia (CSY) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "csy/reported/PT1S/native",
    "title" : "Reported second data in the coordinate system of measurement of the data ('native'), provided by Casey, Australia (CSY) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "csy/best-avail/PT1S/native",
    "title" : "Best-avail second data in the coordinate system of measurement of the data ('native'), provided by Casey, Australia (CSY) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "csy/best-avail/PT1S/xyzf",
    "title" : "Best-avail second data in XYZF orientation, provided by Casey, Australia (CSY) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "csy/best-avail/PT1S/hdzf",
    "title" : "Best-avail second data in HDZF orientation, provided by Casey, Australia (CSY) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "csy/best-avail/PT1S/diff",
    "title" : "Best-avail second data in DIFF orientation, provided by Casey, Australia (CSY) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "cta/adjusted/PT1M/native",
    "title" : "Adjusted minute data in the coordinate system of measurement of the data ('native'), provided by Charters Towers, Australia (CTA) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "cta/adjusted/PT1M/xyzf",
    "title" : "Adjusted minute data in XYZF orientation, provided by Charters Towers, Australia (CTA) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "cta/adjusted/PT1M/hdzf",
    "title" : "Adjusted minute data in HDZF orientation, provided by Charters Towers, Australia (CTA) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "cta/adjusted/PT1M/diff",
    "title" : "Adjusted minute data in DIFF orientation, provided by Charters Towers, Australia (CTA) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "cta/definitive/PT1M/native",
    "title" : "Definitive minute data in the coordinate system of measurement of the data ('native'), provided by Charters Towers, Australia (CTA) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "cta/definitive/PT1M/xyzf",
    "title" : "Definitive minute data in XYZF orientation, provided by Charters Towers, Australia (CTA) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "cta/definitive/PT1M/hdzf",
    "title" : "Definitive minute data in HDZF orientation, provided by Charters Towers, Australia (CTA) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "cta/definitive/PT1M/diff",
    "title" : "Definitive minute data in DIFF orientation, provided by Charters Towers, Australia (CTA) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "cta/quasi-def/PT1M/native",
    "title" : "Quasi-def minute data in the coordinate system of measurement of the data ('native'), provided by Charters Towers, Australia (CTA) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "cta/quasi-def/PT1M/xyzf",
    "title" : "Quasi-def minute data in XYZF orientation, provided by Charters Towers, Australia (CTA) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "cta/quasi-def/PT1M/hdzf",
    "title" : "Quasi-def minute data in HDZF orientation, provided by Charters Towers, Australia (CTA) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "cta/quasi-def/PT1M/diff",
    "title" : "Quasi-def minute data in DIFF orientation, provided by Charters Towers, Australia (CTA) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "cta/reported/PT1M/native",
    "title" : "Reported minute data in the coordinate system of measurement of the data ('native'), provided by Charters Towers, Australia (CTA) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "cta/best-avail/PT1M/native",
    "title" : "Best-avail minute data in the coordinate system of measurement of the data ('native'), provided by Charters Towers, Australia (CTA) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "cta/best-avail/PT1M/xyzf",
    "title" : "Best-avail minute data in XYZF orientation, provided by Charters Towers, Australia (CTA) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "cta/best-avail/PT1M/hdzf",
    "title" : "Best-avail minute data in HDZF orientation, provided by Charters Towers, Australia (CTA) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "cta/best-avail/PT1M/diff",
    "title" : "Best-avail minute data in DIFF orientation, provided by Charters Towers, Australia (CTA) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "cta/adjusted/PT1S/native",
    "title" : "Adjusted second data in the coordinate system of measurement of the data ('native'), provided by Charters Towers, Australia (CTA) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "cta/adjusted/PT1S/xyzf",
    "title" : "Adjusted second data in XYZF orientation, provided by Charters Towers, Australia (CTA) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "cta/adjusted/PT1S/hdzf",
    "title" : "Adjusted second data in HDZF orientation, provided by Charters Towers, Australia (CTA) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "cta/adjusted/PT1S/diff",
    "title" : "Adjusted second data in DIFF orientation, provided by Charters Towers, Australia (CTA) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "cta/quasi-def/PT1S/native",
    "title" : "Quasi-def second data in the coordinate system of measurement of the data ('native'), provided by Charters Towers, Australia (CTA) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "cta/quasi-def/PT1S/xyzf",
    "title" : "Quasi-def second data in XYZF orientation, provided by Charters Towers, Australia (CTA) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "cta/quasi-def/PT1S/hdzf",
    "title" : "Quasi-def second data in HDZF orientation, provided by Charters Towers, Australia (CTA) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "cta/quasi-def/PT1S/diff",
    "title" : "Quasi-def second data in DIFF orientation, provided by Charters Towers, Australia (CTA) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "cta/reported/PT1S/native",
    "title" : "Reported second data in the coordinate system of measurement of the data ('native'), provided by Charters Towers, Australia (CTA) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "cta/best-avail/PT1S/native",
    "title" : "Best-avail second data in the coordinate system of measurement of the data ('native'), provided by Charters Towers, Australia (CTA) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "cta/best-avail/PT1S/xyzf",
    "title" : "Best-avail second data in XYZF orientation, provided by Charters Towers, Australia (CTA) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "cta/best-avail/PT1S/hdzf",
    "title" : "Best-avail second data in HDZF orientation, provided by Charters Towers, Australia (CTA) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "cta/best-avail/PT1S/diff",
    "title" : "Best-avail second data in DIFF orientation, provided by Charters Towers, Australia (CTA) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "cyg/adjusted/PT1M/native",
    "title" : "Adjusted minute data in the coordinate system of measurement of the data ('native'), provided by Cheongyang, Republic of Korea (CYG) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "cyg/adjusted/PT1M/xyzf",
    "title" : "Adjusted minute data in XYZF orientation, provided by Cheongyang, Republic of Korea (CYG) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "cyg/adjusted/PT1M/hdzf",
    "title" : "Adjusted minute data in HDZF orientation, provided by Cheongyang, Republic of Korea (CYG) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "cyg/adjusted/PT1M/diff",
    "title" : "Adjusted minute data in DIFF orientation, provided by Cheongyang, Republic of Korea (CYG) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "cyg/definitive/PT1M/native",
    "title" : "Definitive minute data in the coordinate system of measurement of the data ('native'), provided by Cheongyang, Republic of Korea (CYG) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "cyg/definitive/PT1M/xyzf",
    "title" : "Definitive minute data in XYZF orientation, provided by Cheongyang, Republic of Korea (CYG) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "cyg/definitive/PT1M/hdzf",
    "title" : "Definitive minute data in HDZF orientation, provided by Cheongyang, Republic of Korea (CYG) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "cyg/definitive/PT1M/diff",
    "title" : "Definitive minute data in DIFF orientation, provided by Cheongyang, Republic of Korea (CYG) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "cyg/quasi-def/PT1M/native",
    "title" : "Quasi-def minute data in the coordinate system of measurement of the data ('native'), provided by Cheongyang, Republic of Korea (CYG) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "cyg/quasi-def/PT1M/xyzf",
    "title" : "Quasi-def minute data in XYZF orientation, provided by Cheongyang, Republic of Korea (CYG) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "cyg/quasi-def/PT1M/hdzf",
    "title" : "Quasi-def minute data in HDZF orientation, provided by Cheongyang, Republic of Korea (CYG) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "cyg/quasi-def/PT1M/diff",
    "title" : "Quasi-def minute data in DIFF orientation, provided by Cheongyang, Republic of Korea (CYG) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "cyg/reported/PT1M/native",
    "title" : "Reported minute data in the coordinate system of measurement of the data ('native'), provided by Cheongyang, Republic of Korea (CYG) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "cyg/best-avail/PT1M/native",
    "title" : "Best-avail minute data in the coordinate system of measurement of the data ('native'), provided by Cheongyang, Republic of Korea (CYG) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "cyg/best-avail/PT1M/xyzf",
    "title" : "Best-avail minute data in XYZF orientation, provided by Cheongyang, Republic of Korea (CYG) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "cyg/best-avail/PT1M/hdzf",
    "title" : "Best-avail minute data in HDZF orientation, provided by Cheongyang, Republic of Korea (CYG) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "cyg/best-avail/PT1M/diff",
    "title" : "Best-avail minute data in DIFF orientation, provided by Cheongyang, Republic of Korea (CYG) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "cyg/adjusted/PT1S/native",
    "title" : "Adjusted second data in the coordinate system of measurement of the data ('native'), provided by Cheongyang, Republic of Korea (CYG) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "cyg/adjusted/PT1S/xyzf",
    "title" : "Adjusted second data in XYZF orientation, provided by Cheongyang, Republic of Korea (CYG) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "cyg/adjusted/PT1S/hdzf",
    "title" : "Adjusted second data in HDZF orientation, provided by Cheongyang, Republic of Korea (CYG) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "cyg/adjusted/PT1S/diff",
    "title" : "Adjusted second data in DIFF orientation, provided by Cheongyang, Republic of Korea (CYG) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "cyg/reported/PT1S/native",
    "title" : "Reported second data in the coordinate system of measurement of the data ('native'), provided by Cheongyang, Republic of Korea (CYG) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "cyg/best-avail/PT1S/native",
    "title" : "Best-avail second data in the coordinate system of measurement of the data ('native'), provided by Cheongyang, Republic of Korea (CYG) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "cyg/best-avail/PT1S/xyzf",
    "title" : "Best-avail second data in XYZF orientation, provided by Cheongyang, Republic of Korea (CYG) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "cyg/best-avail/PT1S/hdzf",
    "title" : "Best-avail second data in HDZF orientation, provided by Cheongyang, Republic of Korea (CYG) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "cyg/best-avail/PT1S/diff",
    "title" : "Best-avail second data in DIFF orientation, provided by Cheongyang, Republic of Korea (CYG) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "czt/adjusted/PT1M/native",
    "title" : "Adjusted minute data in the coordinate system of measurement of the data ('native'), provided by Port Alfred, French Southern Territories (CZT) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "czt/adjusted/PT1M/xyzf",
    "title" : "Adjusted minute data in XYZF orientation, provided by Port Alfred, French Southern Territories (CZT) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "czt/adjusted/PT1M/hdzf",
    "title" : "Adjusted minute data in HDZF orientation, provided by Port Alfred, French Southern Territories (CZT) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "czt/adjusted/PT1M/diff",
    "title" : "Adjusted minute data in DIFF orientation, provided by Port Alfred, French Southern Territories (CZT) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "czt/definitive/PT1M/native",
    "title" : "Definitive minute data in the coordinate system of measurement of the data ('native'), provided by Port Alfred, French Southern Territories (CZT) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "czt/definitive/PT1M/xyzf",
    "title" : "Definitive minute data in XYZF orientation, provided by Port Alfred, French Southern Territories (CZT) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "czt/definitive/PT1M/hdzf",
    "title" : "Definitive minute data in HDZF orientation, provided by Port Alfred, French Southern Territories (CZT) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "czt/definitive/PT1M/diff",
    "title" : "Definitive minute data in DIFF orientation, provided by Port Alfred, French Southern Territories (CZT) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "czt/quasi-def/PT1M/native",
    "title" : "Quasi-def minute data in the coordinate system of measurement of the data ('native'), provided by Port Alfred, French Southern Territories (CZT) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "czt/quasi-def/PT1M/xyzf",
    "title" : "Quasi-def minute data in XYZF orientation, provided by Port Alfred, French Southern Territories (CZT) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "czt/quasi-def/PT1M/hdzf",
    "title" : "Quasi-def minute data in HDZF orientation, provided by Port Alfred, French Southern Territories (CZT) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "czt/quasi-def/PT1M/diff",
    "title" : "Quasi-def minute data in DIFF orientation, provided by Port Alfred, French Southern Territories (CZT) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "czt/reported/PT1M/native",
    "title" : "Reported minute data in the coordinate system of measurement of the data ('native'), provided by Port Alfred, French Southern Territories (CZT) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "czt/best-avail/PT1M/native",
    "title" : "Best-avail minute data in the coordinate system of measurement of the data ('native'), provided by Port Alfred, French Southern Territories (CZT) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "czt/best-avail/PT1M/xyzf",
    "title" : "Best-avail minute data in XYZF orientation, provided by Port Alfred, French Southern Territories (CZT) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "czt/best-avail/PT1M/hdzf",
    "title" : "Best-avail minute data in HDZF orientation, provided by Port Alfred, French Southern Territories (CZT) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "czt/best-avail/PT1M/diff",
    "title" : "Best-avail minute data in DIFF orientation, provided by Port Alfred, French Southern Territories (CZT) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "czt/adjusted/PT1S/native",
    "title" : "Adjusted second data in the coordinate system of measurement of the data ('native'), provided by Port Alfred, French Southern Territories (CZT) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "czt/adjusted/PT1S/xyzf",
    "title" : "Adjusted second data in XYZF orientation, provided by Port Alfred, French Southern Territories (CZT) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "czt/adjusted/PT1S/hdzf",
    "title" : "Adjusted second data in HDZF orientation, provided by Port Alfred, French Southern Territories (CZT) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "czt/adjusted/PT1S/diff",
    "title" : "Adjusted second data in DIFF orientation, provided by Port Alfred, French Southern Territories (CZT) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "czt/quasi-def/PT1S/native",
    "title" : "Quasi-def second data in the coordinate system of measurement of the data ('native'), provided by Port Alfred, French Southern Territories (CZT) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "czt/quasi-def/PT1S/xyzf",
    "title" : "Quasi-def second data in XYZF orientation, provided by Port Alfred, French Southern Territories (CZT) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "czt/quasi-def/PT1S/hdzf",
    "title" : "Quasi-def second data in HDZF orientation, provided by Port Alfred, French Southern Territories (CZT) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "czt/quasi-def/PT1S/diff",
    "title" : "Quasi-def second data in DIFF orientation, provided by Port Alfred, French Southern Territories (CZT) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "czt/reported/PT1S/native",
    "title" : "Reported second data in the coordinate system of measurement of the data ('native'), provided by Port Alfred, French Southern Territories (CZT) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "czt/best-avail/PT1S/native",
    "title" : "Best-avail second data in the coordinate system of measurement of the data ('native'), provided by Port Alfred, French Southern Territories (CZT) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "czt/best-avail/PT1S/xyzf",
    "title" : "Best-avail second data in XYZF orientation, provided by Port Alfred, French Southern Territories (CZT) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "czt/best-avail/PT1S/hdzf",
    "title" : "Best-avail second data in HDZF orientation, provided by Port Alfred, French Southern Territories (CZT) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "czt/best-avail/PT1S/diff",
    "title" : "Best-avail second data in DIFF orientation, provided by Port Alfred, French Southern Territories (CZT) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "ded/adjusted/PT1M/native",
    "title" : "Adjusted minute data in the coordinate system of measurement of the data ('native'), provided by Deadhorse, USA (DED) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "ded/adjusted/PT1M/xyzf",
    "title" : "Adjusted minute data in XYZF orientation, provided by Deadhorse, USA (DED) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "ded/adjusted/PT1M/hdzf",
    "title" : "Adjusted minute data in HDZF orientation, provided by Deadhorse, USA (DED) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "ded/adjusted/PT1M/diff",
    "title" : "Adjusted minute data in DIFF orientation, provided by Deadhorse, USA (DED) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "ded/definitive/PT1M/native",
    "title" : "Definitive minute data in the coordinate system of measurement of the data ('native'), provided by Deadhorse, USA (DED) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "ded/definitive/PT1M/xyzf",
    "title" : "Definitive minute data in XYZF orientation, provided by Deadhorse, USA (DED) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "ded/definitive/PT1M/hdzf",
    "title" : "Definitive minute data in HDZF orientation, provided by Deadhorse, USA (DED) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "ded/definitive/PT1M/diff",
    "title" : "Definitive minute data in DIFF orientation, provided by Deadhorse, USA (DED) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "ded/reported/PT1M/native",
    "title" : "Reported minute data in the coordinate system of measurement of the data ('native'), provided by Deadhorse, USA (DED) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "ded/best-avail/PT1M/native",
    "title" : "Best-avail minute data in the coordinate system of measurement of the data ('native'), provided by Deadhorse, USA (DED) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "ded/best-avail/PT1M/xyzf",
    "title" : "Best-avail minute data in XYZF orientation, provided by Deadhorse, USA (DED) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "ded/best-avail/PT1M/hdzf",
    "title" : "Best-avail minute data in HDZF orientation, provided by Deadhorse, USA (DED) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "ded/best-avail/PT1M/diff",
    "title" : "Best-avail minute data in DIFF orientation, provided by Deadhorse, USA (DED) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "ded/adjusted/PT1S/native",
    "title" : "Adjusted second data in the coordinate system of measurement of the data ('native'), provided by Deadhorse, USA (DED) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "ded/adjusted/PT1S/xyzf",
    "title" : "Adjusted second data in XYZF orientation, provided by Deadhorse, USA (DED) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "ded/adjusted/PT1S/hdzf",
    "title" : "Adjusted second data in HDZF orientation, provided by Deadhorse, USA (DED) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "ded/adjusted/PT1S/diff",
    "title" : "Adjusted second data in DIFF orientation, provided by Deadhorse, USA (DED) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "ded/reported/PT1S/native",
    "title" : "Reported second data in the coordinate system of measurement of the data ('native'), provided by Deadhorse, USA (DED) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "ded/best-avail/PT1S/native",
    "title" : "Best-avail second data in the coordinate system of measurement of the data ('native'), provided by Deadhorse, USA (DED) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "ded/best-avail/PT1S/xyzf",
    "title" : "Best-avail second data in XYZF orientation, provided by Deadhorse, USA (DED) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "ded/best-avail/PT1S/hdzf",
    "title" : "Best-avail second data in HDZF orientation, provided by Deadhorse, USA (DED) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "ded/best-avail/PT1S/diff",
    "title" : "Best-avail second data in DIFF orientation, provided by Deadhorse, USA (DED) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "dlr/definitive/PT1M/native",
    "title" : "Definitive minute data in the coordinate system of measurement of the data ('native'), provided by Del Rio, USA (DLR) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "dlr/definitive/PT1M/xyzf",
    "title" : "Definitive minute data in XYZF orientation, provided by Del Rio, USA (DLR) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "dlr/definitive/PT1M/hdzf",
    "title" : "Definitive minute data in HDZF orientation, provided by Del Rio, USA (DLR) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "dlr/definitive/PT1M/diff",
    "title" : "Definitive minute data in DIFF orientation, provided by Del Rio, USA (DLR) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "dlr/reported/PT1M/native",
    "title" : "Reported minute data in the coordinate system of measurement of the data ('native'), provided by Del Rio, USA (DLR) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "dlr/best-avail/PT1M/native",
    "title" : "Best-avail minute data in the coordinate system of measurement of the data ('native'), provided by Del Rio, USA (DLR) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "dlr/best-avail/PT1M/xyzf",
    "title" : "Best-avail minute data in XYZF orientation, provided by Del Rio, USA (DLR) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "dlr/best-avail/PT1M/hdzf",
    "title" : "Best-avail minute data in HDZF orientation, provided by Del Rio, USA (DLR) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "dlr/best-avail/PT1M/diff",
    "title" : "Best-avail minute data in DIFF orientation, provided by Del Rio, USA (DLR) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "dlt/definitive/PT1M/native",
    "title" : "Definitive minute data in the coordinate system of measurement of the data ('native'), provided by Dalat, Vietnam (DLT) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "dlt/definitive/PT1M/xyzf",
    "title" : "Definitive minute data in XYZF orientation, provided by Dalat, Vietnam (DLT) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "dlt/definitive/PT1M/hdzf",
    "title" : "Definitive minute data in HDZF orientation, provided by Dalat, Vietnam (DLT) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "dlt/definitive/PT1M/diff",
    "title" : "Definitive minute data in DIFF orientation, provided by Dalat, Vietnam (DLT) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "dlt/quasi-def/PT1M/native",
    "title" : "Quasi-def minute data in the coordinate system of measurement of the data ('native'), provided by Dalat, Vietnam (DLT) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "dlt/quasi-def/PT1M/xyzf",
    "title" : "Quasi-def minute data in XYZF orientation, provided by Dalat, Vietnam (DLT) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "dlt/quasi-def/PT1M/hdzf",
    "title" : "Quasi-def minute data in HDZF orientation, provided by Dalat, Vietnam (DLT) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "dlt/quasi-def/PT1M/diff",
    "title" : "Quasi-def minute data in DIFF orientation, provided by Dalat, Vietnam (DLT) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "dlt/reported/PT1M/native",
    "title" : "Reported minute data in the coordinate system of measurement of the data ('native'), provided by Dalat, Vietnam (DLT) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "dlt/best-avail/PT1M/native",
    "title" : "Best-avail minute data in the coordinate system of measurement of the data ('native'), provided by Dalat, Vietnam (DLT) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "dlt/best-avail/PT1M/xyzf",
    "title" : "Best-avail minute data in XYZF orientation, provided by Dalat, Vietnam (DLT) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "dlt/best-avail/PT1M/hdzf",
    "title" : "Best-avail minute data in HDZF orientation, provided by Dalat, Vietnam (DLT) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "dlt/best-avail/PT1M/diff",
    "title" : "Best-avail minute data in DIFF orientation, provided by Dalat, Vietnam (DLT) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "dlt/quasi-def/PT1S/native",
    "title" : "Quasi-def second data in the coordinate system of measurement of the data ('native'), provided by Dalat, Vietnam (DLT) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "dlt/quasi-def/PT1S/xyzf",
    "title" : "Quasi-def second data in XYZF orientation, provided by Dalat, Vietnam (DLT) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "dlt/quasi-def/PT1S/hdzf",
    "title" : "Quasi-def second data in HDZF orientation, provided by Dalat, Vietnam (DLT) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "dlt/quasi-def/PT1S/diff",
    "title" : "Quasi-def second data in DIFF orientation, provided by Dalat, Vietnam (DLT) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "dlt/reported/PT1S/native",
    "title" : "Reported second data in the coordinate system of measurement of the data ('native'), provided by Dalat, Vietnam (DLT) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "dlt/best-avail/PT1S/native",
    "title" : "Best-avail second data in the coordinate system of measurement of the data ('native'), provided by Dalat, Vietnam (DLT) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "dlt/best-avail/PT1S/xyzf",
    "title" : "Best-avail second data in XYZF orientation, provided by Dalat, Vietnam (DLT) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "dlt/best-avail/PT1S/hdzf",
    "title" : "Best-avail second data in HDZF orientation, provided by Dalat, Vietnam (DLT) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "dlt/best-avail/PT1S/diff",
    "title" : "Best-avail second data in DIFF orientation, provided by Dalat, Vietnam (DLT) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "dmc/adjusted/PT1M/native",
    "title" : "Adjusted minute data in the coordinate system of measurement of the data ('native'), provided by Dome Concordia, Antarctica (DMC) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "dmc/adjusted/PT1M/xyzf",
    "title" : "Adjusted minute data in XYZF orientation, provided by Dome Concordia, Antarctica (DMC) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "dmc/adjusted/PT1M/hdzf",
    "title" : "Adjusted minute data in HDZF orientation, provided by Dome Concordia, Antarctica (DMC) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "dmc/adjusted/PT1M/diff",
    "title" : "Adjusted minute data in DIFF orientation, provided by Dome Concordia, Antarctica (DMC) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "dmc/definitive/PT1M/native",
    "title" : "Definitive minute data in the coordinate system of measurement of the data ('native'), provided by Dome Concordia, Antarctica (DMC) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "dmc/definitive/PT1M/xyzf",
    "title" : "Definitive minute data in XYZF orientation, provided by Dome Concordia, Antarctica (DMC) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "dmc/definitive/PT1M/hdzf",
    "title" : "Definitive minute data in HDZF orientation, provided by Dome Concordia, Antarctica (DMC) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "dmc/definitive/PT1M/diff",
    "title" : "Definitive minute data in DIFF orientation, provided by Dome Concordia, Antarctica (DMC) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "dmc/reported/PT1M/native",
    "title" : "Reported minute data in the coordinate system of measurement of the data ('native'), provided by Dome Concordia, Antarctica (DMC) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "dmc/best-avail/PT1M/native",
    "title" : "Best-avail minute data in the coordinate system of measurement of the data ('native'), provided by Dome Concordia, Antarctica (DMC) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "dmc/best-avail/PT1M/xyzf",
    "title" : "Best-avail minute data in XYZF orientation, provided by Dome Concordia, Antarctica (DMC) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "dmc/best-avail/PT1M/hdzf",
    "title" : "Best-avail minute data in HDZF orientation, provided by Dome Concordia, Antarctica (DMC) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "dmc/best-avail/PT1M/diff",
    "title" : "Best-avail minute data in DIFF orientation, provided by Dome Concordia, Antarctica (DMC) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "dmc/adjusted/PT1S/native",
    "title" : "Adjusted second data in the coordinate system of measurement of the data ('native'), provided by Dome Concordia, Antarctica (DMC) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "dmc/adjusted/PT1S/xyzf",
    "title" : "Adjusted second data in XYZF orientation, provided by Dome Concordia, Antarctica (DMC) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "dmc/adjusted/PT1S/hdzf",
    "title" : "Adjusted second data in HDZF orientation, provided by Dome Concordia, Antarctica (DMC) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "dmc/adjusted/PT1S/diff",
    "title" : "Adjusted second data in DIFF orientation, provided by Dome Concordia, Antarctica (DMC) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "dmc/reported/PT1S/native",
    "title" : "Reported second data in the coordinate system of measurement of the data ('native'), provided by Dome Concordia, Antarctica (DMC) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "dmc/best-avail/PT1S/native",
    "title" : "Best-avail second data in the coordinate system of measurement of the data ('native'), provided by Dome Concordia, Antarctica (DMC) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "dmc/best-avail/PT1S/xyzf",
    "title" : "Best-avail second data in XYZF orientation, provided by Dome Concordia, Antarctica (DMC) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "dmc/best-avail/PT1S/hdzf",
    "title" : "Best-avail second data in HDZF orientation, provided by Dome Concordia, Antarctica (DMC) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "dmc/best-avail/PT1S/diff",
    "title" : "Best-avail second data in DIFF orientation, provided by Dome Concordia, Antarctica (DMC) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "dou/adjusted/PT1M/native",
    "title" : "Adjusted minute data in the coordinate system of measurement of the data ('native'), provided by Dourbes, Belgium (DOU) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "dou/adjusted/PT1M/xyzf",
    "title" : "Adjusted minute data in XYZF orientation, provided by Dourbes, Belgium (DOU) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "dou/adjusted/PT1M/hdzf",
    "title" : "Adjusted minute data in HDZF orientation, provided by Dourbes, Belgium (DOU) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "dou/adjusted/PT1M/diff",
    "title" : "Adjusted minute data in DIFF orientation, provided by Dourbes, Belgium (DOU) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "dou/definitive/PT1M/native",
    "title" : "Definitive minute data in the coordinate system of measurement of the data ('native'), provided by Dourbes, Belgium (DOU) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "dou/definitive/PT1M/xyzf",
    "title" : "Definitive minute data in XYZF orientation, provided by Dourbes, Belgium (DOU) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "dou/definitive/PT1M/hdzf",
    "title" : "Definitive minute data in HDZF orientation, provided by Dourbes, Belgium (DOU) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "dou/definitive/PT1M/diff",
    "title" : "Definitive minute data in DIFF orientation, provided by Dourbes, Belgium (DOU) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "dou/quasi-def/PT1M/native",
    "title" : "Quasi-def minute data in the coordinate system of measurement of the data ('native'), provided by Dourbes, Belgium (DOU) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "dou/quasi-def/PT1M/xyzf",
    "title" : "Quasi-def minute data in XYZF orientation, provided by Dourbes, Belgium (DOU) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "dou/quasi-def/PT1M/hdzf",
    "title" : "Quasi-def minute data in HDZF orientation, provided by Dourbes, Belgium (DOU) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "dou/quasi-def/PT1M/diff",
    "title" : "Quasi-def minute data in DIFF orientation, provided by Dourbes, Belgium (DOU) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "dou/reported/PT1M/native",
    "title" : "Reported minute data in the coordinate system of measurement of the data ('native'), provided by Dourbes, Belgium (DOU) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "dou/best-avail/PT1M/native",
    "title" : "Best-avail minute data in the coordinate system of measurement of the data ('native'), provided by Dourbes, Belgium (DOU) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "dou/best-avail/PT1M/xyzf",
    "title" : "Best-avail minute data in XYZF orientation, provided by Dourbes, Belgium (DOU) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "dou/best-avail/PT1M/hdzf",
    "title" : "Best-avail minute data in HDZF orientation, provided by Dourbes, Belgium (DOU) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "dou/best-avail/PT1M/diff",
    "title" : "Best-avail minute data in DIFF orientation, provided by Dourbes, Belgium (DOU) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "drv/adjusted/PT1M/native",
    "title" : "Adjusted minute data in the coordinate system of measurement of the data ('native'), provided by Dumont d'Urville, French Southern Territories (DRV) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "drv/adjusted/PT1M/xyzf",
    "title" : "Adjusted minute data in XYZF orientation, provided by Dumont d'Urville, French Southern Territories (DRV) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "drv/adjusted/PT1M/hdzf",
    "title" : "Adjusted minute data in HDZF orientation, provided by Dumont d'Urville, French Southern Territories (DRV) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "drv/adjusted/PT1M/diff",
    "title" : "Adjusted minute data in DIFF orientation, provided by Dumont d'Urville, French Southern Territories (DRV) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "drv/definitive/PT1M/native",
    "title" : "Definitive minute data in the coordinate system of measurement of the data ('native'), provided by Dumont d'Urville, French Southern Territories (DRV) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "drv/definitive/PT1M/xyzf",
    "title" : "Definitive minute data in XYZF orientation, provided by Dumont d'Urville, French Southern Territories (DRV) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "drv/definitive/PT1M/hdzf",
    "title" : "Definitive minute data in HDZF orientation, provided by Dumont d'Urville, French Southern Territories (DRV) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "drv/definitive/PT1M/diff",
    "title" : "Definitive minute data in DIFF orientation, provided by Dumont d'Urville, French Southern Territories (DRV) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "drv/quasi-def/PT1M/native",
    "title" : "Quasi-def minute data in the coordinate system of measurement of the data ('native'), provided by Dumont d'Urville, French Southern Territories (DRV) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "drv/quasi-def/PT1M/xyzf",
    "title" : "Quasi-def minute data in XYZF orientation, provided by Dumont d'Urville, French Southern Territories (DRV) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "drv/quasi-def/PT1M/hdzf",
    "title" : "Quasi-def minute data in HDZF orientation, provided by Dumont d'Urville, French Southern Territories (DRV) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "drv/quasi-def/PT1M/diff",
    "title" : "Quasi-def minute data in DIFF orientation, provided by Dumont d'Urville, French Southern Territories (DRV) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "drv/reported/PT1M/native",
    "title" : "Reported minute data in the coordinate system of measurement of the data ('native'), provided by Dumont d'Urville, French Southern Territories (DRV) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "drv/best-avail/PT1M/native",
    "title" : "Best-avail minute data in the coordinate system of measurement of the data ('native'), provided by Dumont d'Urville, French Southern Territories (DRV) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "drv/best-avail/PT1M/xyzf",
    "title" : "Best-avail minute data in XYZF orientation, provided by Dumont d'Urville, French Southern Territories (DRV) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "drv/best-avail/PT1M/hdzf",
    "title" : "Best-avail minute data in HDZF orientation, provided by Dumont d'Urville, French Southern Territories (DRV) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "drv/best-avail/PT1M/diff",
    "title" : "Best-avail minute data in DIFF orientation, provided by Dumont d'Urville, French Southern Territories (DRV) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "drv/adjusted/PT1S/native",
    "title" : "Adjusted second data in the coordinate system of measurement of the data ('native'), provided by Dumont d'Urville, French Southern Territories (DRV) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "drv/adjusted/PT1S/xyzf",
    "title" : "Adjusted second data in XYZF orientation, provided by Dumont d'Urville, French Southern Territories (DRV) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "drv/adjusted/PT1S/hdzf",
    "title" : "Adjusted second data in HDZF orientation, provided by Dumont d'Urville, French Southern Territories (DRV) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "drv/adjusted/PT1S/diff",
    "title" : "Adjusted second data in DIFF orientation, provided by Dumont d'Urville, French Southern Territories (DRV) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "drv/quasi-def/PT1S/native",
    "title" : "Quasi-def second data in the coordinate system of measurement of the data ('native'), provided by Dumont d'Urville, French Southern Territories (DRV) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "drv/quasi-def/PT1S/xyzf",
    "title" : "Quasi-def second data in XYZF orientation, provided by Dumont d'Urville, French Southern Territories (DRV) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "drv/quasi-def/PT1S/hdzf",
    "title" : "Quasi-def second data in HDZF orientation, provided by Dumont d'Urville, French Southern Territories (DRV) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "drv/quasi-def/PT1S/diff",
    "title" : "Quasi-def second data in DIFF orientation, provided by Dumont d'Urville, French Southern Territories (DRV) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "drv/reported/PT1S/native",
    "title" : "Reported second data in the coordinate system of measurement of the data ('native'), provided by Dumont d'Urville, French Southern Territories (DRV) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "drv/best-avail/PT1S/native",
    "title" : "Best-avail second data in the coordinate system of measurement of the data ('native'), provided by Dumont d'Urville, French Southern Territories (DRV) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "drv/best-avail/PT1S/xyzf",
    "title" : "Best-avail second data in XYZF orientation, provided by Dumont d'Urville, French Southern Territories (DRV) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "drv/best-avail/PT1S/hdzf",
    "title" : "Best-avail second data in HDZF orientation, provided by Dumont d'Urville, French Southern Territories (DRV) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "drv/best-avail/PT1S/diff",
    "title" : "Best-avail second data in DIFF orientation, provided by Dumont d'Urville, French Southern Territories (DRV) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "dur/adjusted/PT1M/native",
    "title" : "Adjusted minute data in the coordinate system of measurement of the data ('native'), provided by Duronia, Italy (DUR) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "dur/adjusted/PT1M/xyzf",
    "title" : "Adjusted minute data in XYZF orientation, provided by Duronia, Italy (DUR) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "dur/adjusted/PT1M/hdzf",
    "title" : "Adjusted minute data in HDZF orientation, provided by Duronia, Italy (DUR) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "dur/adjusted/PT1M/diff",
    "title" : "Adjusted minute data in DIFF orientation, provided by Duronia, Italy (DUR) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "dur/definitive/PT1M/native",
    "title" : "Definitive minute data in the coordinate system of measurement of the data ('native'), provided by Duronia, Italy (DUR) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "dur/definitive/PT1M/xyzf",
    "title" : "Definitive minute data in XYZF orientation, provided by Duronia, Italy (DUR) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "dur/definitive/PT1M/hdzf",
    "title" : "Definitive minute data in HDZF orientation, provided by Duronia, Italy (DUR) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "dur/definitive/PT1M/diff",
    "title" : "Definitive minute data in DIFF orientation, provided by Duronia, Italy (DUR) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "dur/reported/PT1M/native",
    "title" : "Reported minute data in the coordinate system of measurement of the data ('native'), provided by Duronia, Italy (DUR) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "dur/best-avail/PT1M/native",
    "title" : "Best-avail minute data in the coordinate system of measurement of the data ('native'), provided by Duronia, Italy (DUR) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "dur/best-avail/PT1M/xyzf",
    "title" : "Best-avail minute data in XYZF orientation, provided by Duronia, Italy (DUR) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "dur/best-avail/PT1M/hdzf",
    "title" : "Best-avail minute data in HDZF orientation, provided by Duronia, Italy (DUR) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "dur/best-avail/PT1M/diff",
    "title" : "Best-avail minute data in DIFF orientation, provided by Duronia, Italy (DUR) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "ebr/definitive/PT1M/native",
    "title" : "Definitive minute data in the coordinate system of measurement of the data ('native'), provided by Ebro, Spain (EBR) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "ebr/definitive/PT1M/xyzf",
    "title" : "Definitive minute data in XYZF orientation, provided by Ebro, Spain (EBR) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "ebr/definitive/PT1M/hdzf",
    "title" : "Definitive minute data in HDZF orientation, provided by Ebro, Spain (EBR) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "ebr/definitive/PT1M/diff",
    "title" : "Definitive minute data in DIFF orientation, provided by Ebro, Spain (EBR) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "ebr/quasi-def/PT1M/native",
    "title" : "Quasi-def minute data in the coordinate system of measurement of the data ('native'), provided by Ebro, Spain (EBR) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "ebr/quasi-def/PT1M/xyzf",
    "title" : "Quasi-def minute data in XYZF orientation, provided by Ebro, Spain (EBR) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "ebr/quasi-def/PT1M/hdzf",
    "title" : "Quasi-def minute data in HDZF orientation, provided by Ebro, Spain (EBR) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "ebr/quasi-def/PT1M/diff",
    "title" : "Quasi-def minute data in DIFF orientation, provided by Ebro, Spain (EBR) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "ebr/reported/PT1M/native",
    "title" : "Reported minute data in the coordinate system of measurement of the data ('native'), provided by Ebro, Spain (EBR) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "ebr/best-avail/PT1M/native",
    "title" : "Best-avail minute data in the coordinate system of measurement of the data ('native'), provided by Ebro, Spain (EBR) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "ebr/best-avail/PT1M/xyzf",
    "title" : "Best-avail minute data in XYZF orientation, provided by Ebro, Spain (EBR) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "ebr/best-avail/PT1M/hdzf",
    "title" : "Best-avail minute data in HDZF orientation, provided by Ebro, Spain (EBR) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "ebr/best-avail/PT1M/diff",
    "title" : "Best-avail minute data in DIFF orientation, provided by Ebro, Spain (EBR) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "ebr/quasi-def/PT1S/native",
    "title" : "Quasi-def second data in the coordinate system of measurement of the data ('native'), provided by Ebro, Spain (EBR) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "ebr/quasi-def/PT1S/xyzf",
    "title" : "Quasi-def second data in XYZF orientation, provided by Ebro, Spain (EBR) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "ebr/quasi-def/PT1S/hdzf",
    "title" : "Quasi-def second data in HDZF orientation, provided by Ebro, Spain (EBR) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "ebr/quasi-def/PT1S/diff",
    "title" : "Quasi-def second data in DIFF orientation, provided by Ebro, Spain (EBR) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "ebr/best-avail/PT1S/native",
    "title" : "Best-avail second data in the coordinate system of measurement of the data ('native'), provided by Ebro, Spain (EBR) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "ebr/best-avail/PT1S/xyzf",
    "title" : "Best-avail second data in XYZF orientation, provided by Ebro, Spain (EBR) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "ebr/best-avail/PT1S/hdzf",
    "title" : "Best-avail second data in HDZF orientation, provided by Ebro, Spain (EBR) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "ebr/best-avail/PT1S/diff",
    "title" : "Best-avail second data in DIFF orientation, provided by Ebro, Spain (EBR) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "esk/adjusted/PT1M/native",
    "title" : "Adjusted minute data in the coordinate system of measurement of the data ('native'), provided by Eskdalemuir, United Kingdom (ESK) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "esk/adjusted/PT1M/xyzf",
    "title" : "Adjusted minute data in XYZF orientation, provided by Eskdalemuir, United Kingdom (ESK) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "esk/adjusted/PT1M/hdzf",
    "title" : "Adjusted minute data in HDZF orientation, provided by Eskdalemuir, United Kingdom (ESK) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "esk/adjusted/PT1M/diff",
    "title" : "Adjusted minute data in DIFF orientation, provided by Eskdalemuir, United Kingdom (ESK) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "esk/definitive/PT1M/native",
    "title" : "Definitive minute data in the coordinate system of measurement of the data ('native'), provided by Eskdalemuir, United Kingdom (ESK) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "esk/definitive/PT1M/xyzf",
    "title" : "Definitive minute data in XYZF orientation, provided by Eskdalemuir, United Kingdom (ESK) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "esk/definitive/PT1M/hdzf",
    "title" : "Definitive minute data in HDZF orientation, provided by Eskdalemuir, United Kingdom (ESK) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "esk/definitive/PT1M/diff",
    "title" : "Definitive minute data in DIFF orientation, provided by Eskdalemuir, United Kingdom (ESK) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "esk/quasi-def/PT1M/native",
    "title" : "Quasi-def minute data in the coordinate system of measurement of the data ('native'), provided by Eskdalemuir, United Kingdom (ESK) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "esk/quasi-def/PT1M/xyzf",
    "title" : "Quasi-def minute data in XYZF orientation, provided by Eskdalemuir, United Kingdom (ESK) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "esk/quasi-def/PT1M/hdzf",
    "title" : "Quasi-def minute data in HDZF orientation, provided by Eskdalemuir, United Kingdom (ESK) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "esk/quasi-def/PT1M/diff",
    "title" : "Quasi-def minute data in DIFF orientation, provided by Eskdalemuir, United Kingdom (ESK) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "esk/reported/PT1M/native",
    "title" : "Reported minute data in the coordinate system of measurement of the data ('native'), provided by Eskdalemuir, United Kingdom (ESK) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "esk/best-avail/PT1M/native",
    "title" : "Best-avail minute data in the coordinate system of measurement of the data ('native'), provided by Eskdalemuir, United Kingdom (ESK) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "esk/best-avail/PT1M/xyzf",
    "title" : "Best-avail minute data in XYZF orientation, provided by Eskdalemuir, United Kingdom (ESK) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "esk/best-avail/PT1M/hdzf",
    "title" : "Best-avail minute data in HDZF orientation, provided by Eskdalemuir, United Kingdom (ESK) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "esk/best-avail/PT1M/diff",
    "title" : "Best-avail minute data in DIFF orientation, provided by Eskdalemuir, United Kingdom (ESK) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "esk/adjusted/PT1S/native",
    "title" : "Adjusted second data in the coordinate system of measurement of the data ('native'), provided by Eskdalemuir, United Kingdom (ESK) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "esk/adjusted/PT1S/xyzf",
    "title" : "Adjusted second data in XYZF orientation, provided by Eskdalemuir, United Kingdom (ESK) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "esk/adjusted/PT1S/hdzf",
    "title" : "Adjusted second data in HDZF orientation, provided by Eskdalemuir, United Kingdom (ESK) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "esk/adjusted/PT1S/diff",
    "title" : "Adjusted second data in DIFF orientation, provided by Eskdalemuir, United Kingdom (ESK) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "esk/quasi-def/PT1S/native",
    "title" : "Quasi-def second data in the coordinate system of measurement of the data ('native'), provided by Eskdalemuir, United Kingdom (ESK) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "esk/quasi-def/PT1S/xyzf",
    "title" : "Quasi-def second data in XYZF orientation, provided by Eskdalemuir, United Kingdom (ESK) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "esk/quasi-def/PT1S/hdzf",
    "title" : "Quasi-def second data in HDZF orientation, provided by Eskdalemuir, United Kingdom (ESK) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "esk/quasi-def/PT1S/diff",
    "title" : "Quasi-def second data in DIFF orientation, provided by Eskdalemuir, United Kingdom (ESK) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "esk/best-avail/PT1S/native",
    "title" : "Best-avail second data in the coordinate system of measurement of the data ('native'), provided by Eskdalemuir, United Kingdom (ESK) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "esk/best-avail/PT1S/xyzf",
    "title" : "Best-avail second data in XYZF orientation, provided by Eskdalemuir, United Kingdom (ESK) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "esk/best-avail/PT1S/hdzf",
    "title" : "Best-avail second data in HDZF orientation, provided by Eskdalemuir, United Kingdom (ESK) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "esk/best-avail/PT1S/diff",
    "title" : "Best-avail second data in DIFF orientation, provided by Eskdalemuir, United Kingdom (ESK) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "eyr/adjusted/PT1M/native",
    "title" : "Adjusted minute data in the coordinate system of measurement of the data ('native'), provided by Eyrewell, New Zealand (EYR) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "eyr/adjusted/PT1M/xyzf",
    "title" : "Adjusted minute data in XYZF orientation, provided by Eyrewell, New Zealand (EYR) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "eyr/adjusted/PT1M/hdzf",
    "title" : "Adjusted minute data in HDZF orientation, provided by Eyrewell, New Zealand (EYR) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "eyr/adjusted/PT1M/diff",
    "title" : "Adjusted minute data in DIFF orientation, provided by Eyrewell, New Zealand (EYR) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "eyr/definitive/PT1M/native",
    "title" : "Definitive minute data in the coordinate system of measurement of the data ('native'), provided by Eyrewell, New Zealand (EYR) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "eyr/definitive/PT1M/xyzf",
    "title" : "Definitive minute data in XYZF orientation, provided by Eyrewell, New Zealand (EYR) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "eyr/definitive/PT1M/hdzf",
    "title" : "Definitive minute data in HDZF orientation, provided by Eyrewell, New Zealand (EYR) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "eyr/definitive/PT1M/diff",
    "title" : "Definitive minute data in DIFF orientation, provided by Eyrewell, New Zealand (EYR) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "eyr/quasi-def/PT1M/native",
    "title" : "Quasi-def minute data in the coordinate system of measurement of the data ('native'), provided by Eyrewell, New Zealand (EYR) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "eyr/quasi-def/PT1M/xyzf",
    "title" : "Quasi-def minute data in XYZF orientation, provided by Eyrewell, New Zealand (EYR) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "eyr/quasi-def/PT1M/hdzf",
    "title" : "Quasi-def minute data in HDZF orientation, provided by Eyrewell, New Zealand (EYR) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "eyr/quasi-def/PT1M/diff",
    "title" : "Quasi-def minute data in DIFF orientation, provided by Eyrewell, New Zealand (EYR) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "eyr/reported/PT1M/native",
    "title" : "Reported minute data in the coordinate system of measurement of the data ('native'), provided by Eyrewell, New Zealand (EYR) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "eyr/best-avail/PT1M/native",
    "title" : "Best-avail minute data in the coordinate system of measurement of the data ('native'), provided by Eyrewell, New Zealand (EYR) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "eyr/best-avail/PT1M/xyzf",
    "title" : "Best-avail minute data in XYZF orientation, provided by Eyrewell, New Zealand (EYR) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "eyr/best-avail/PT1M/hdzf",
    "title" : "Best-avail minute data in HDZF orientation, provided by Eyrewell, New Zealand (EYR) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "eyr/best-avail/PT1M/diff",
    "title" : "Best-avail minute data in DIFF orientation, provided by Eyrewell, New Zealand (EYR) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "eyr/adjusted/PT1S/native",
    "title" : "Adjusted second data in the coordinate system of measurement of the data ('native'), provided by Eyrewell, New Zealand (EYR) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "eyr/adjusted/PT1S/xyzf",
    "title" : "Adjusted second data in XYZF orientation, provided by Eyrewell, New Zealand (EYR) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "eyr/adjusted/PT1S/hdzf",
    "title" : "Adjusted second data in HDZF orientation, provided by Eyrewell, New Zealand (EYR) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "eyr/adjusted/PT1S/diff",
    "title" : "Adjusted second data in DIFF orientation, provided by Eyrewell, New Zealand (EYR) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "eyr/reported/PT1S/native",
    "title" : "Reported second data in the coordinate system of measurement of the data ('native'), provided by Eyrewell, New Zealand (EYR) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "eyr/best-avail/PT1S/native",
    "title" : "Best-avail second data in the coordinate system of measurement of the data ('native'), provided by Eyrewell, New Zealand (EYR) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "eyr/best-avail/PT1S/xyzf",
    "title" : "Best-avail second data in XYZF orientation, provided by Eyrewell, New Zealand (EYR) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "eyr/best-avail/PT1S/hdzf",
    "title" : "Best-avail second data in HDZF orientation, provided by Eyrewell, New Zealand (EYR) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "eyr/best-avail/PT1S/diff",
    "title" : "Best-avail second data in DIFF orientation, provided by Eyrewell, New Zealand (EYR) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "fcc/definitive/PT1M/native",
    "title" : "Definitive minute data in the coordinate system of measurement of the data ('native'), provided by Fort Churchill, Canada (FCC) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "fcc/definitive/PT1M/xyzf",
    "title" : "Definitive minute data in XYZF orientation, provided by Fort Churchill, Canada (FCC) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "fcc/definitive/PT1M/hdzf",
    "title" : "Definitive minute data in HDZF orientation, provided by Fort Churchill, Canada (FCC) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "fcc/definitive/PT1M/diff",
    "title" : "Definitive minute data in DIFF orientation, provided by Fort Churchill, Canada (FCC) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "fcc/reported/PT1M/native",
    "title" : "Reported minute data in the coordinate system of measurement of the data ('native'), provided by Fort Churchill, Canada (FCC) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "fcc/best-avail/PT1M/native",
    "title" : "Best-avail minute data in the coordinate system of measurement of the data ('native'), provided by Fort Churchill, Canada (FCC) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "fcc/best-avail/PT1M/xyzf",
    "title" : "Best-avail minute data in XYZF orientation, provided by Fort Churchill, Canada (FCC) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "fcc/best-avail/PT1M/hdzf",
    "title" : "Best-avail minute data in HDZF orientation, provided by Fort Churchill, Canada (FCC) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "fcc/best-avail/PT1M/diff",
    "title" : "Best-avail minute data in DIFF orientation, provided by Fort Churchill, Canada (FCC) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "fcc/reported/PT1S/native",
    "title" : "Reported second data in the coordinate system of measurement of the data ('native'), provided by Fort Churchill, Canada (FCC) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "fcc/best-avail/PT1S/native",
    "title" : "Best-avail second data in the coordinate system of measurement of the data ('native'), provided by Fort Churchill, Canada (FCC) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "fcc/best-avail/PT1S/xyzf",
    "title" : "Best-avail second data in XYZF orientation, provided by Fort Churchill, Canada (FCC) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "fcc/best-avail/PT1S/hdzf",
    "title" : "Best-avail second data in HDZF orientation, provided by Fort Churchill, Canada (FCC) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "fcc/best-avail/PT1S/diff",
    "title" : "Best-avail second data in DIFF orientation, provided by Fort Churchill, Canada (FCC) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "frd/adjusted/PT1M/native",
    "title" : "Adjusted minute data in the coordinate system of measurement of the data ('native'), provided by Fredericksburg, USA (FRD) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "frd/adjusted/PT1M/xyzf",
    "title" : "Adjusted minute data in XYZF orientation, provided by Fredericksburg, USA (FRD) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "frd/adjusted/PT1M/hdzf",
    "title" : "Adjusted minute data in HDZF orientation, provided by Fredericksburg, USA (FRD) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "frd/adjusted/PT1M/diff",
    "title" : "Adjusted minute data in DIFF orientation, provided by Fredericksburg, USA (FRD) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "frd/definitive/PT1M/native",
    "title" : "Definitive minute data in the coordinate system of measurement of the data ('native'), provided by Fredericksburg, USA (FRD) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "frd/definitive/PT1M/xyzf",
    "title" : "Definitive minute data in XYZF orientation, provided by Fredericksburg, USA (FRD) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "frd/definitive/PT1M/hdzf",
    "title" : "Definitive minute data in HDZF orientation, provided by Fredericksburg, USA (FRD) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "frd/definitive/PT1M/diff",
    "title" : "Definitive minute data in DIFF orientation, provided by Fredericksburg, USA (FRD) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "frd/quasi-def/PT1M/native",
    "title" : "Quasi-def minute data in the coordinate system of measurement of the data ('native'), provided by Fredericksburg, USA (FRD) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "frd/quasi-def/PT1M/xyzf",
    "title" : "Quasi-def minute data in XYZF orientation, provided by Fredericksburg, USA (FRD) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "frd/quasi-def/PT1M/hdzf",
    "title" : "Quasi-def minute data in HDZF orientation, provided by Fredericksburg, USA (FRD) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "frd/quasi-def/PT1M/diff",
    "title" : "Quasi-def minute data in DIFF orientation, provided by Fredericksburg, USA (FRD) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "frd/reported/PT1M/native",
    "title" : "Reported minute data in the coordinate system of measurement of the data ('native'), provided by Fredericksburg, USA (FRD) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "frd/best-avail/PT1M/native",
    "title" : "Best-avail minute data in the coordinate system of measurement of the data ('native'), provided by Fredericksburg, USA (FRD) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "frd/best-avail/PT1M/xyzf",
    "title" : "Best-avail minute data in XYZF orientation, provided by Fredericksburg, USA (FRD) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "frd/best-avail/PT1M/hdzf",
    "title" : "Best-avail minute data in HDZF orientation, provided by Fredericksburg, USA (FRD) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "frd/best-avail/PT1M/diff",
    "title" : "Best-avail minute data in DIFF orientation, provided by Fredericksburg, USA (FRD) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "frd/adjusted/PT1S/native",
    "title" : "Adjusted second data in the coordinate system of measurement of the data ('native'), provided by Fredericksburg, USA (FRD) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "frd/adjusted/PT1S/xyzf",
    "title" : "Adjusted second data in XYZF orientation, provided by Fredericksburg, USA (FRD) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "frd/adjusted/PT1S/hdzf",
    "title" : "Adjusted second data in HDZF orientation, provided by Fredericksburg, USA (FRD) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "frd/adjusted/PT1S/diff",
    "title" : "Adjusted second data in DIFF orientation, provided by Fredericksburg, USA (FRD) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "frd/reported/PT1S/native",
    "title" : "Reported second data in the coordinate system of measurement of the data ('native'), provided by Fredericksburg, USA (FRD) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "frd/best-avail/PT1S/native",
    "title" : "Best-avail second data in the coordinate system of measurement of the data ('native'), provided by Fredericksburg, USA (FRD) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "frd/best-avail/PT1S/xyzf",
    "title" : "Best-avail second data in XYZF orientation, provided by Fredericksburg, USA (FRD) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "frd/best-avail/PT1S/hdzf",
    "title" : "Best-avail second data in HDZF orientation, provided by Fredericksburg, USA (FRD) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "frd/best-avail/PT1S/diff",
    "title" : "Best-avail second data in DIFF orientation, provided by Fredericksburg, USA (FRD) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "frn/adjusted/PT1M/native",
    "title" : "Adjusted minute data in the coordinate system of measurement of the data ('native'), provided by Fresno, USA (FRN) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "frn/adjusted/PT1M/xyzf",
    "title" : "Adjusted minute data in XYZF orientation, provided by Fresno, USA (FRN) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "frn/adjusted/PT1M/hdzf",
    "title" : "Adjusted minute data in HDZF orientation, provided by Fresno, USA (FRN) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "frn/adjusted/PT1M/diff",
    "title" : "Adjusted minute data in DIFF orientation, provided by Fresno, USA (FRN) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "frn/definitive/PT1M/native",
    "title" : "Definitive minute data in the coordinate system of measurement of the data ('native'), provided by Fresno, USA (FRN) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "frn/definitive/PT1M/xyzf",
    "title" : "Definitive minute data in XYZF orientation, provided by Fresno, USA (FRN) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "frn/definitive/PT1M/hdzf",
    "title" : "Definitive minute data in HDZF orientation, provided by Fresno, USA (FRN) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "frn/definitive/PT1M/diff",
    "title" : "Definitive minute data in DIFF orientation, provided by Fresno, USA (FRN) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "frn/quasi-def/PT1M/native",
    "title" : "Quasi-def minute data in the coordinate system of measurement of the data ('native'), provided by Fresno, USA (FRN) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "frn/quasi-def/PT1M/xyzf",
    "title" : "Quasi-def minute data in XYZF orientation, provided by Fresno, USA (FRN) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "frn/quasi-def/PT1M/hdzf",
    "title" : "Quasi-def minute data in HDZF orientation, provided by Fresno, USA (FRN) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "frn/quasi-def/PT1M/diff",
    "title" : "Quasi-def minute data in DIFF orientation, provided by Fresno, USA (FRN) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "frn/reported/PT1M/native",
    "title" : "Reported minute data in the coordinate system of measurement of the data ('native'), provided by Fresno, USA (FRN) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "frn/best-avail/PT1M/native",
    "title" : "Best-avail minute data in the coordinate system of measurement of the data ('native'), provided by Fresno, USA (FRN) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "frn/best-avail/PT1M/xyzf",
    "title" : "Best-avail minute data in XYZF orientation, provided by Fresno, USA (FRN) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "frn/best-avail/PT1M/hdzf",
    "title" : "Best-avail minute data in HDZF orientation, provided by Fresno, USA (FRN) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "frn/best-avail/PT1M/diff",
    "title" : "Best-avail minute data in DIFF orientation, provided by Fresno, USA (FRN) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "frn/adjusted/PT1S/native",
    "title" : "Adjusted second data in the coordinate system of measurement of the data ('native'), provided by Fresno, USA (FRN) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "frn/adjusted/PT1S/xyzf",
    "title" : "Adjusted second data in XYZF orientation, provided by Fresno, USA (FRN) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "frn/adjusted/PT1S/hdzf",
    "title" : "Adjusted second data in HDZF orientation, provided by Fresno, USA (FRN) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "frn/adjusted/PT1S/diff",
    "title" : "Adjusted second data in DIFF orientation, provided by Fresno, USA (FRN) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "frn/reported/PT1S/native",
    "title" : "Reported second data in the coordinate system of measurement of the data ('native'), provided by Fresno, USA (FRN) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "frn/best-avail/PT1S/native",
    "title" : "Best-avail second data in the coordinate system of measurement of the data ('native'), provided by Fresno, USA (FRN) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "frn/best-avail/PT1S/xyzf",
    "title" : "Best-avail second data in XYZF orientation, provided by Fresno, USA (FRN) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "frn/best-avail/PT1S/hdzf",
    "title" : "Best-avail second data in HDZF orientation, provided by Fresno, USA (FRN) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "frn/best-avail/PT1S/diff",
    "title" : "Best-avail second data in DIFF orientation, provided by Fresno, USA (FRN) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "fur/adjusted/PT1M/native",
    "title" : "Adjusted minute data in the coordinate system of measurement of the data ('native'), provided by Furstenfeldenbruck, Germany (FUR) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "fur/adjusted/PT1M/xyzf",
    "title" : "Adjusted minute data in XYZF orientation, provided by Furstenfeldenbruck, Germany (FUR) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "fur/adjusted/PT1M/hdzf",
    "title" : "Adjusted minute data in HDZF orientation, provided by Furstenfeldenbruck, Germany (FUR) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "fur/adjusted/PT1M/diff",
    "title" : "Adjusted minute data in DIFF orientation, provided by Furstenfeldenbruck, Germany (FUR) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "fur/definitive/PT1M/native",
    "title" : "Definitive minute data in the coordinate system of measurement of the data ('native'), provided by Furstenfeldenbruck, Germany (FUR) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "fur/definitive/PT1M/xyzf",
    "title" : "Definitive minute data in XYZF orientation, provided by Furstenfeldenbruck, Germany (FUR) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "fur/definitive/PT1M/hdzf",
    "title" : "Definitive minute data in HDZF orientation, provided by Furstenfeldenbruck, Germany (FUR) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "fur/definitive/PT1M/diff",
    "title" : "Definitive minute data in DIFF orientation, provided by Furstenfeldenbruck, Germany (FUR) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "fur/quasi-def/PT1M/native",
    "title" : "Quasi-def minute data in the coordinate system of measurement of the data ('native'), provided by Furstenfeldenbruck, Germany (FUR) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "fur/quasi-def/PT1M/xyzf",
    "title" : "Quasi-def minute data in XYZF orientation, provided by Furstenfeldenbruck, Germany (FUR) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "fur/quasi-def/PT1M/hdzf",
    "title" : "Quasi-def minute data in HDZF orientation, provided by Furstenfeldenbruck, Germany (FUR) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "fur/quasi-def/PT1M/diff",
    "title" : "Quasi-def minute data in DIFF orientation, provided by Furstenfeldenbruck, Germany (FUR) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "fur/reported/PT1M/native",
    "title" : "Reported minute data in the coordinate system of measurement of the data ('native'), provided by Furstenfeldenbruck, Germany (FUR) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "fur/best-avail/PT1M/native",
    "title" : "Best-avail minute data in the coordinate system of measurement of the data ('native'), provided by Furstenfeldenbruck, Germany (FUR) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "fur/best-avail/PT1M/xyzf",
    "title" : "Best-avail minute data in XYZF orientation, provided by Furstenfeldenbruck, Germany (FUR) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "fur/best-avail/PT1M/hdzf",
    "title" : "Best-avail minute data in HDZF orientation, provided by Furstenfeldenbruck, Germany (FUR) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "fur/best-avail/PT1M/diff",
    "title" : "Best-avail minute data in DIFF orientation, provided by Furstenfeldenbruck, Germany (FUR) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "fur/reported/PT1S/native",
    "title" : "Reported second data in the coordinate system of measurement of the data ('native'), provided by Furstenfeldenbruck, Germany (FUR) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "fur/best-avail/PT1S/native",
    "title" : "Best-avail second data in the coordinate system of measurement of the data ('native'), provided by Furstenfeldenbruck, Germany (FUR) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "fur/best-avail/PT1S/xyzf",
    "title" : "Best-avail second data in XYZF orientation, provided by Furstenfeldenbruck, Germany (FUR) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "fur/best-avail/PT1S/hdzf",
    "title" : "Best-avail second data in HDZF orientation, provided by Furstenfeldenbruck, Germany (FUR) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "fur/best-avail/PT1S/diff",
    "title" : "Best-avail second data in DIFF orientation, provided by Furstenfeldenbruck, Germany (FUR) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "gan/adjusted/PT1M/native",
    "title" : "Adjusted minute data in the coordinate system of measurement of the data ('native'), provided by Gan Int. Airpt, Addu Atoll, Maldives (GAN) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "gan/adjusted/PT1M/xyzf",
    "title" : "Adjusted minute data in XYZF orientation, provided by Gan Int. Airpt, Addu Atoll, Maldives (GAN) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "gan/adjusted/PT1M/hdzf",
    "title" : "Adjusted minute data in HDZF orientation, provided by Gan Int. Airpt, Addu Atoll, Maldives (GAN) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "gan/adjusted/PT1M/diff",
    "title" : "Adjusted minute data in DIFF orientation, provided by Gan Int. Airpt, Addu Atoll, Maldives (GAN) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "gan/definitive/PT1M/native",
    "title" : "Definitive minute data in the coordinate system of measurement of the data ('native'), provided by Gan Int. Airpt, Addu Atoll, Maldives (GAN) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "gan/definitive/PT1M/xyzf",
    "title" : "Definitive minute data in XYZF orientation, provided by Gan Int. Airpt, Addu Atoll, Maldives (GAN) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "gan/definitive/PT1M/hdzf",
    "title" : "Definitive minute data in HDZF orientation, provided by Gan Int. Airpt, Addu Atoll, Maldives (GAN) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "gan/definitive/PT1M/diff",
    "title" : "Definitive minute data in DIFF orientation, provided by Gan Int. Airpt, Addu Atoll, Maldives (GAN) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "gan/quasi-def/PT1M/native",
    "title" : "Quasi-def minute data in the coordinate system of measurement of the data ('native'), provided by Gan Int. Airpt, Addu Atoll, Maldives (GAN) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "gan/quasi-def/PT1M/xyzf",
    "title" : "Quasi-def minute data in XYZF orientation, provided by Gan Int. Airpt, Addu Atoll, Maldives (GAN) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "gan/quasi-def/PT1M/hdzf",
    "title" : "Quasi-def minute data in HDZF orientation, provided by Gan Int. Airpt, Addu Atoll, Maldives (GAN) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "gan/quasi-def/PT1M/diff",
    "title" : "Quasi-def minute data in DIFF orientation, provided by Gan Int. Airpt, Addu Atoll, Maldives (GAN) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "gan/reported/PT1M/native",
    "title" : "Reported minute data in the coordinate system of measurement of the data ('native'), provided by Gan Int. Airpt, Addu Atoll, Maldives (GAN) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "gan/best-avail/PT1M/native",
    "title" : "Best-avail minute data in the coordinate system of measurement of the data ('native'), provided by Gan Int. Airpt, Addu Atoll, Maldives (GAN) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "gan/best-avail/PT1M/xyzf",
    "title" : "Best-avail minute data in XYZF orientation, provided by Gan Int. Airpt, Addu Atoll, Maldives (GAN) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "gan/best-avail/PT1M/hdzf",
    "title" : "Best-avail minute data in HDZF orientation, provided by Gan Int. Airpt, Addu Atoll, Maldives (GAN) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "gan/best-avail/PT1M/diff",
    "title" : "Best-avail minute data in DIFF orientation, provided by Gan Int. Airpt, Addu Atoll, Maldives (GAN) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "gck/definitive/PT1M/native",
    "title" : "Definitive minute data in the coordinate system of measurement of the data ('native'), provided by Grocka, Serbia (GCK) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "gck/definitive/PT1M/xyzf",
    "title" : "Definitive minute data in XYZF orientation, provided by Grocka, Serbia (GCK) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "gck/definitive/PT1M/hdzf",
    "title" : "Definitive minute data in HDZF orientation, provided by Grocka, Serbia (GCK) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "gck/definitive/PT1M/diff",
    "title" : "Definitive minute data in DIFF orientation, provided by Grocka, Serbia (GCK) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "gck/reported/PT1M/native",
    "title" : "Reported minute data in the coordinate system of measurement of the data ('native'), provided by Grocka, Serbia (GCK) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "gck/best-avail/PT1M/native",
    "title" : "Best-avail minute data in the coordinate system of measurement of the data ('native'), provided by Grocka, Serbia (GCK) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "gck/best-avail/PT1M/xyzf",
    "title" : "Best-avail minute data in XYZF orientation, provided by Grocka, Serbia (GCK) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "gck/best-avail/PT1M/hdzf",
    "title" : "Best-avail minute data in HDZF orientation, provided by Grocka, Serbia (GCK) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "gck/best-avail/PT1M/diff",
    "title" : "Best-avail minute data in DIFF orientation, provided by Grocka, Serbia (GCK) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "gdh/adjusted/PT1M/native",
    "title" : "Adjusted minute data in the coordinate system of measurement of the data ('native'), provided by Qeqertarsuaq (Godhavn), Greenland (GDH) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "gdh/adjusted/PT1M/xyzf",
    "title" : "Adjusted minute data in XYZF orientation, provided by Qeqertarsuaq (Godhavn), Greenland (GDH) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "gdh/adjusted/PT1M/hdzf",
    "title" : "Adjusted minute data in HDZF orientation, provided by Qeqertarsuaq (Godhavn), Greenland (GDH) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "gdh/adjusted/PT1M/diff",
    "title" : "Adjusted minute data in DIFF orientation, provided by Qeqertarsuaq (Godhavn), Greenland (GDH) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "gdh/definitive/PT1M/native",
    "title" : "Definitive minute data in the coordinate system of measurement of the data ('native'), provided by Qeqertarsuaq (Godhavn), Greenland (GDH) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "gdh/definitive/PT1M/xyzf",
    "title" : "Definitive minute data in XYZF orientation, provided by Qeqertarsuaq (Godhavn), Greenland (GDH) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "gdh/definitive/PT1M/hdzf",
    "title" : "Definitive minute data in HDZF orientation, provided by Qeqertarsuaq (Godhavn), Greenland (GDH) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "gdh/definitive/PT1M/diff",
    "title" : "Definitive minute data in DIFF orientation, provided by Qeqertarsuaq (Godhavn), Greenland (GDH) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "gdh/quasi-def/PT1M/native",
    "title" : "Quasi-def minute data in the coordinate system of measurement of the data ('native'), provided by Qeqertarsuaq (Godhavn), Greenland (GDH) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "gdh/quasi-def/PT1M/xyzf",
    "title" : "Quasi-def minute data in XYZF orientation, provided by Qeqertarsuaq (Godhavn), Greenland (GDH) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "gdh/quasi-def/PT1M/hdzf",
    "title" : "Quasi-def minute data in HDZF orientation, provided by Qeqertarsuaq (Godhavn), Greenland (GDH) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "gdh/quasi-def/PT1M/diff",
    "title" : "Quasi-def minute data in DIFF orientation, provided by Qeqertarsuaq (Godhavn), Greenland (GDH) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "gdh/reported/PT1M/native",
    "title" : "Reported minute data in the coordinate system of measurement of the data ('native'), provided by Qeqertarsuaq (Godhavn), Greenland (GDH) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "gdh/best-avail/PT1M/native",
    "title" : "Best-avail minute data in the coordinate system of measurement of the data ('native'), provided by Qeqertarsuaq (Godhavn), Greenland (GDH) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "gdh/best-avail/PT1M/xyzf",
    "title" : "Best-avail minute data in XYZF orientation, provided by Qeqertarsuaq (Godhavn), Greenland (GDH) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "gdh/best-avail/PT1M/hdzf",
    "title" : "Best-avail minute data in HDZF orientation, provided by Qeqertarsuaq (Godhavn), Greenland (GDH) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "gdh/best-avail/PT1M/diff",
    "title" : "Best-avail minute data in DIFF orientation, provided by Qeqertarsuaq (Godhavn), Greenland (GDH) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "gln/definitive/PT1M/native",
    "title" : "Definitive minute data in the coordinate system of measurement of the data ('native'), provided by Glenlea, Canada (GLN) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "gln/definitive/PT1M/xyzf",
    "title" : "Definitive minute data in XYZF orientation, provided by Glenlea, Canada (GLN) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "gln/definitive/PT1M/hdzf",
    "title" : "Definitive minute data in HDZF orientation, provided by Glenlea, Canada (GLN) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "gln/definitive/PT1M/diff",
    "title" : "Definitive minute data in DIFF orientation, provided by Glenlea, Canada (GLN) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "gln/reported/PT1M/native",
    "title" : "Reported minute data in the coordinate system of measurement of the data ('native'), provided by Glenlea, Canada (GLN) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "gln/best-avail/PT1M/native",
    "title" : "Best-avail minute data in the coordinate system of measurement of the data ('native'), provided by Glenlea, Canada (GLN) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "gln/best-avail/PT1M/xyzf",
    "title" : "Best-avail minute data in XYZF orientation, provided by Glenlea, Canada (GLN) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "gln/best-avail/PT1M/hdzf",
    "title" : "Best-avail minute data in HDZF orientation, provided by Glenlea, Canada (GLN) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "gln/best-avail/PT1M/diff",
    "title" : "Best-avail minute data in DIFF orientation, provided by Glenlea, Canada (GLN) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "gna/adjusted/PT1M/native",
    "title" : "Adjusted minute data in the coordinate system of measurement of the data ('native'), provided by Gnangara, Australia (GNA) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "gna/adjusted/PT1M/xyzf",
    "title" : "Adjusted minute data in XYZF orientation, provided by Gnangara, Australia (GNA) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "gna/adjusted/PT1M/hdzf",
    "title" : "Adjusted minute data in HDZF orientation, provided by Gnangara, Australia (GNA) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "gna/adjusted/PT1M/diff",
    "title" : "Adjusted minute data in DIFF orientation, provided by Gnangara, Australia (GNA) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "gna/definitive/PT1M/native",
    "title" : "Definitive minute data in the coordinate system of measurement of the data ('native'), provided by Gnangara, Australia (GNA) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "gna/definitive/PT1M/xyzf",
    "title" : "Definitive minute data in XYZF orientation, provided by Gnangara, Australia (GNA) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "gna/definitive/PT1M/hdzf",
    "title" : "Definitive minute data in HDZF orientation, provided by Gnangara, Australia (GNA) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "gna/definitive/PT1M/diff",
    "title" : "Definitive minute data in DIFF orientation, provided by Gnangara, Australia (GNA) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "gna/quasi-def/PT1M/native",
    "title" : "Quasi-def minute data in the coordinate system of measurement of the data ('native'), provided by Gnangara, Australia (GNA) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "gna/quasi-def/PT1M/xyzf",
    "title" : "Quasi-def minute data in XYZF orientation, provided by Gnangara, Australia (GNA) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "gna/quasi-def/PT1M/hdzf",
    "title" : "Quasi-def minute data in HDZF orientation, provided by Gnangara, Australia (GNA) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "gna/quasi-def/PT1M/diff",
    "title" : "Quasi-def minute data in DIFF orientation, provided by Gnangara, Australia (GNA) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "gna/reported/PT1M/native",
    "title" : "Reported minute data in the coordinate system of measurement of the data ('native'), provided by Gnangara, Australia (GNA) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "gna/best-avail/PT1M/native",
    "title" : "Best-avail minute data in the coordinate system of measurement of the data ('native'), provided by Gnangara, Australia (GNA) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "gna/best-avail/PT1M/xyzf",
    "title" : "Best-avail minute data in XYZF orientation, provided by Gnangara, Australia (GNA) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "gna/best-avail/PT1M/hdzf",
    "title" : "Best-avail minute data in HDZF orientation, provided by Gnangara, Australia (GNA) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "gna/best-avail/PT1M/diff",
    "title" : "Best-avail minute data in DIFF orientation, provided by Gnangara, Australia (GNA) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "gna/adjusted/PT1S/native",
    "title" : "Adjusted second data in the coordinate system of measurement of the data ('native'), provided by Gnangara, Australia (GNA) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "gna/adjusted/PT1S/xyzf",
    "title" : "Adjusted second data in XYZF orientation, provided by Gnangara, Australia (GNA) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "gna/adjusted/PT1S/hdzf",
    "title" : "Adjusted second data in HDZF orientation, provided by Gnangara, Australia (GNA) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "gna/adjusted/PT1S/diff",
    "title" : "Adjusted second data in DIFF orientation, provided by Gnangara, Australia (GNA) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "gna/reported/PT1S/native",
    "title" : "Reported second data in the coordinate system of measurement of the data ('native'), provided by Gnangara, Australia (GNA) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "gna/best-avail/PT1S/native",
    "title" : "Best-avail second data in the coordinate system of measurement of the data ('native'), provided by Gnangara, Australia (GNA) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "gna/best-avail/PT1S/xyzf",
    "title" : "Best-avail second data in XYZF orientation, provided by Gnangara, Australia (GNA) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "gna/best-avail/PT1S/hdzf",
    "title" : "Best-avail second data in HDZF orientation, provided by Gnangara, Australia (GNA) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "gna/best-avail/PT1S/diff",
    "title" : "Best-avail second data in DIFF orientation, provided by Gnangara, Australia (GNA) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "gng/adjusted/PT1M/native",
    "title" : "Adjusted minute data in the coordinate system of measurement of the data ('native'), provided by Gingin, Australia (GNG) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "gng/adjusted/PT1M/xyzf",
    "title" : "Adjusted minute data in XYZF orientation, provided by Gingin, Australia (GNG) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "gng/adjusted/PT1M/hdzf",
    "title" : "Adjusted minute data in HDZF orientation, provided by Gingin, Australia (GNG) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "gng/adjusted/PT1M/diff",
    "title" : "Adjusted minute data in DIFF orientation, provided by Gingin, Australia (GNG) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "gng/definitive/PT1M/native",
    "title" : "Definitive minute data in the coordinate system of measurement of the data ('native'), provided by Gingin, Australia (GNG) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "gng/definitive/PT1M/xyzf",
    "title" : "Definitive minute data in XYZF orientation, provided by Gingin, Australia (GNG) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "gng/definitive/PT1M/hdzf",
    "title" : "Definitive minute data in HDZF orientation, provided by Gingin, Australia (GNG) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "gng/definitive/PT1M/diff",
    "title" : "Definitive minute data in DIFF orientation, provided by Gingin, Australia (GNG) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "gng/quasi-def/PT1M/native",
    "title" : "Quasi-def minute data in the coordinate system of measurement of the data ('native'), provided by Gingin, Australia (GNG) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "gng/quasi-def/PT1M/xyzf",
    "title" : "Quasi-def minute data in XYZF orientation, provided by Gingin, Australia (GNG) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "gng/quasi-def/PT1M/hdzf",
    "title" : "Quasi-def minute data in HDZF orientation, provided by Gingin, Australia (GNG) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "gng/quasi-def/PT1M/diff",
    "title" : "Quasi-def minute data in DIFF orientation, provided by Gingin, Australia (GNG) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "gng/reported/PT1M/native",
    "title" : "Reported minute data in the coordinate system of measurement of the data ('native'), provided by Gingin, Australia (GNG) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "gng/best-avail/PT1M/native",
    "title" : "Best-avail minute data in the coordinate system of measurement of the data ('native'), provided by Gingin, Australia (GNG) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "gng/best-avail/PT1M/xyzf",
    "title" : "Best-avail minute data in XYZF orientation, provided by Gingin, Australia (GNG) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "gng/best-avail/PT1M/hdzf",
    "title" : "Best-avail minute data in HDZF orientation, provided by Gingin, Australia (GNG) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "gng/best-avail/PT1M/diff",
    "title" : "Best-avail minute data in DIFF orientation, provided by Gingin, Australia (GNG) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "gng/adjusted/PT1S/native",
    "title" : "Adjusted second data in the coordinate system of measurement of the data ('native'), provided by Gingin, Australia (GNG) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "gng/adjusted/PT1S/xyzf",
    "title" : "Adjusted second data in XYZF orientation, provided by Gingin, Australia (GNG) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "gng/adjusted/PT1S/hdzf",
    "title" : "Adjusted second data in HDZF orientation, provided by Gingin, Australia (GNG) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "gng/adjusted/PT1S/diff",
    "title" : "Adjusted second data in DIFF orientation, provided by Gingin, Australia (GNG) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "gng/quasi-def/PT1S/native",
    "title" : "Quasi-def second data in the coordinate system of measurement of the data ('native'), provided by Gingin, Australia (GNG) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "gng/quasi-def/PT1S/xyzf",
    "title" : "Quasi-def second data in XYZF orientation, provided by Gingin, Australia (GNG) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "gng/quasi-def/PT1S/hdzf",
    "title" : "Quasi-def second data in HDZF orientation, provided by Gingin, Australia (GNG) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "gng/quasi-def/PT1S/diff",
    "title" : "Quasi-def second data in DIFF orientation, provided by Gingin, Australia (GNG) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "gng/reported/PT1S/native",
    "title" : "Reported second data in the coordinate system of measurement of the data ('native'), provided by Gingin, Australia (GNG) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "gng/best-avail/PT1S/native",
    "title" : "Best-avail second data in the coordinate system of measurement of the data ('native'), provided by Gingin, Australia (GNG) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "gng/best-avail/PT1S/xyzf",
    "title" : "Best-avail second data in XYZF orientation, provided by Gingin, Australia (GNG) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "gng/best-avail/PT1S/hdzf",
    "title" : "Best-avail second data in HDZF orientation, provided by Gingin, Australia (GNG) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "gng/best-avail/PT1S/diff",
    "title" : "Best-avail second data in DIFF orientation, provided by Gingin, Australia (GNG) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "gua/adjusted/PT1M/native",
    "title" : "Adjusted minute data in the coordinate system of measurement of the data ('native'), provided by Guam, USA (GUA) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "gua/adjusted/PT1M/xyzf",
    "title" : "Adjusted minute data in XYZF orientation, provided by Guam, USA (GUA) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "gua/adjusted/PT1M/hdzf",
    "title" : "Adjusted minute data in HDZF orientation, provided by Guam, USA (GUA) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "gua/adjusted/PT1M/diff",
    "title" : "Adjusted minute data in DIFF orientation, provided by Guam, USA (GUA) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "gua/definitive/PT1M/native",
    "title" : "Definitive minute data in the coordinate system of measurement of the data ('native'), provided by Guam, USA (GUA) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "gua/definitive/PT1M/xyzf",
    "title" : "Definitive minute data in XYZF orientation, provided by Guam, USA (GUA) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "gua/definitive/PT1M/hdzf",
    "title" : "Definitive minute data in HDZF orientation, provided by Guam, USA (GUA) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "gua/definitive/PT1M/diff",
    "title" : "Definitive minute data in DIFF orientation, provided by Guam, USA (GUA) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "gua/quasi-def/PT1M/native",
    "title" : "Quasi-def minute data in the coordinate system of measurement of the data ('native'), provided by Guam, USA (GUA) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "gua/quasi-def/PT1M/xyzf",
    "title" : "Quasi-def minute data in XYZF orientation, provided by Guam, USA (GUA) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "gua/quasi-def/PT1M/hdzf",
    "title" : "Quasi-def minute data in HDZF orientation, provided by Guam, USA (GUA) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "gua/quasi-def/PT1M/diff",
    "title" : "Quasi-def minute data in DIFF orientation, provided by Guam, USA (GUA) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "gua/reported/PT1M/native",
    "title" : "Reported minute data in the coordinate system of measurement of the data ('native'), provided by Guam, USA (GUA) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "gua/best-avail/PT1M/native",
    "title" : "Best-avail minute data in the coordinate system of measurement of the data ('native'), provided by Guam, USA (GUA) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "gua/best-avail/PT1M/xyzf",
    "title" : "Best-avail minute data in XYZF orientation, provided by Guam, USA (GUA) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "gua/best-avail/PT1M/hdzf",
    "title" : "Best-avail minute data in HDZF orientation, provided by Guam, USA (GUA) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "gua/best-avail/PT1M/diff",
    "title" : "Best-avail minute data in DIFF orientation, provided by Guam, USA (GUA) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "gua/adjusted/PT1S/native",
    "title" : "Adjusted second data in the coordinate system of measurement of the data ('native'), provided by Guam, USA (GUA) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "gua/adjusted/PT1S/xyzf",
    "title" : "Adjusted second data in XYZF orientation, provided by Guam, USA (GUA) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "gua/adjusted/PT1S/hdzf",
    "title" : "Adjusted second data in HDZF orientation, provided by Guam, USA (GUA) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "gua/adjusted/PT1S/diff",
    "title" : "Adjusted second data in DIFF orientation, provided by Guam, USA (GUA) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "gua/reported/PT1S/native",
    "title" : "Reported second data in the coordinate system of measurement of the data ('native'), provided by Guam, USA (GUA) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "gua/best-avail/PT1S/native",
    "title" : "Best-avail second data in the coordinate system of measurement of the data ('native'), provided by Guam, USA (GUA) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "gua/best-avail/PT1S/xyzf",
    "title" : "Best-avail second data in XYZF orientation, provided by Guam, USA (GUA) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "gua/best-avail/PT1S/hdzf",
    "title" : "Best-avail second data in HDZF orientation, provided by Guam, USA (GUA) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "gua/best-avail/PT1S/diff",
    "title" : "Best-avail second data in DIFF orientation, provided by Guam, USA (GUA) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "gui/definitive/PT1M/native",
    "title" : "Definitive minute data in the coordinate system of measurement of the data ('native'), provided by Guimar-Tenerife, Spain (GUI) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "gui/definitive/PT1M/xyzf",
    "title" : "Definitive minute data in XYZF orientation, provided by Guimar-Tenerife, Spain (GUI) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "gui/definitive/PT1M/hdzf",
    "title" : "Definitive minute data in HDZF orientation, provided by Guimar-Tenerife, Spain (GUI) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "gui/definitive/PT1M/diff",
    "title" : "Definitive minute data in DIFF orientation, provided by Guimar-Tenerife, Spain (GUI) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "gui/quasi-def/PT1M/native",
    "title" : "Quasi-def minute data in the coordinate system of measurement of the data ('native'), provided by Guimar-Tenerife, Spain (GUI) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "gui/quasi-def/PT1M/xyzf",
    "title" : "Quasi-def minute data in XYZF orientation, provided by Guimar-Tenerife, Spain (GUI) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "gui/quasi-def/PT1M/hdzf",
    "title" : "Quasi-def minute data in HDZF orientation, provided by Guimar-Tenerife, Spain (GUI) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "gui/quasi-def/PT1M/diff",
    "title" : "Quasi-def minute data in DIFF orientation, provided by Guimar-Tenerife, Spain (GUI) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "gui/reported/PT1M/native",
    "title" : "Reported minute data in the coordinate system of measurement of the data ('native'), provided by Guimar-Tenerife, Spain (GUI) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "gui/best-avail/PT1M/native",
    "title" : "Best-avail minute data in the coordinate system of measurement of the data ('native'), provided by Guimar-Tenerife, Spain (GUI) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "gui/best-avail/PT1M/xyzf",
    "title" : "Best-avail minute data in XYZF orientation, provided by Guimar-Tenerife, Spain (GUI) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "gui/best-avail/PT1M/hdzf",
    "title" : "Best-avail minute data in HDZF orientation, provided by Guimar-Tenerife, Spain (GUI) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "gui/best-avail/PT1M/diff",
    "title" : "Best-avail minute data in DIFF orientation, provided by Guimar-Tenerife, Spain (GUI) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "gzh/adjusted/PT1M/native",
    "title" : "Adjusted minute data in the coordinate system of measurement of the data ('native'), provided by Guangzhou, China (GZH) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "gzh/adjusted/PT1M/xyzf",
    "title" : "Adjusted minute data in XYZF orientation, provided by Guangzhou, China (GZH) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "gzh/adjusted/PT1M/hdzf",
    "title" : "Adjusted minute data in HDZF orientation, provided by Guangzhou, China (GZH) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "gzh/adjusted/PT1M/diff",
    "title" : "Adjusted minute data in DIFF orientation, provided by Guangzhou, China (GZH) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "gzh/definitive/PT1M/native",
    "title" : "Definitive minute data in the coordinate system of measurement of the data ('native'), provided by Guangzhou, China (GZH) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "gzh/definitive/PT1M/xyzf",
    "title" : "Definitive minute data in XYZF orientation, provided by Guangzhou, China (GZH) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "gzh/definitive/PT1M/hdzf",
    "title" : "Definitive minute data in HDZF orientation, provided by Guangzhou, China (GZH) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "gzh/definitive/PT1M/diff",
    "title" : "Definitive minute data in DIFF orientation, provided by Guangzhou, China (GZH) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "gzh/reported/PT1M/native",
    "title" : "Reported minute data in the coordinate system of measurement of the data ('native'), provided by Guangzhou, China (GZH) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "gzh/best-avail/PT1M/native",
    "title" : "Best-avail minute data in the coordinate system of measurement of the data ('native'), provided by Guangzhou, China (GZH) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "gzh/best-avail/PT1M/xyzf",
    "title" : "Best-avail minute data in XYZF orientation, provided by Guangzhou, China (GZH) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "gzh/best-avail/PT1M/hdzf",
    "title" : "Best-avail minute data in HDZF orientation, provided by Guangzhou, China (GZH) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "gzh/best-avail/PT1M/diff",
    "title" : "Best-avail minute data in DIFF orientation, provided by Guangzhou, China (GZH) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "had/adjusted/PT1M/native",
    "title" : "Adjusted minute data in the coordinate system of measurement of the data ('native'), provided by Hartland, United Kingdom (HAD) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "had/adjusted/PT1M/xyzf",
    "title" : "Adjusted minute data in XYZF orientation, provided by Hartland, United Kingdom (HAD) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "had/adjusted/PT1M/hdzf",
    "title" : "Adjusted minute data in HDZF orientation, provided by Hartland, United Kingdom (HAD) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "had/adjusted/PT1M/diff",
    "title" : "Adjusted minute data in DIFF orientation, provided by Hartland, United Kingdom (HAD) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "had/definitive/PT1M/native",
    "title" : "Definitive minute data in the coordinate system of measurement of the data ('native'), provided by Hartland, United Kingdom (HAD) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "had/definitive/PT1M/xyzf",
    "title" : "Definitive minute data in XYZF orientation, provided by Hartland, United Kingdom (HAD) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "had/definitive/PT1M/hdzf",
    "title" : "Definitive minute data in HDZF orientation, provided by Hartland, United Kingdom (HAD) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "had/definitive/PT1M/diff",
    "title" : "Definitive minute data in DIFF orientation, provided by Hartland, United Kingdom (HAD) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "had/quasi-def/PT1M/native",
    "title" : "Quasi-def minute data in the coordinate system of measurement of the data ('native'), provided by Hartland, United Kingdom (HAD) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "had/quasi-def/PT1M/xyzf",
    "title" : "Quasi-def minute data in XYZF orientation, provided by Hartland, United Kingdom (HAD) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "had/quasi-def/PT1M/hdzf",
    "title" : "Quasi-def minute data in HDZF orientation, provided by Hartland, United Kingdom (HAD) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "had/quasi-def/PT1M/diff",
    "title" : "Quasi-def minute data in DIFF orientation, provided by Hartland, United Kingdom (HAD) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "had/reported/PT1M/native",
    "title" : "Reported minute data in the coordinate system of measurement of the data ('native'), provided by Hartland, United Kingdom (HAD) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "had/best-avail/PT1M/native",
    "title" : "Best-avail minute data in the coordinate system of measurement of the data ('native'), provided by Hartland, United Kingdom (HAD) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "had/best-avail/PT1M/xyzf",
    "title" : "Best-avail minute data in XYZF orientation, provided by Hartland, United Kingdom (HAD) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "had/best-avail/PT1M/hdzf",
    "title" : "Best-avail minute data in HDZF orientation, provided by Hartland, United Kingdom (HAD) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "had/best-avail/PT1M/diff",
    "title" : "Best-avail minute data in DIFF orientation, provided by Hartland, United Kingdom (HAD) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "had/adjusted/PT1S/native",
    "title" : "Adjusted second data in the coordinate system of measurement of the data ('native'), provided by Hartland, United Kingdom (HAD) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "had/adjusted/PT1S/xyzf",
    "title" : "Adjusted second data in XYZF orientation, provided by Hartland, United Kingdom (HAD) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "had/adjusted/PT1S/hdzf",
    "title" : "Adjusted second data in HDZF orientation, provided by Hartland, United Kingdom (HAD) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "had/adjusted/PT1S/diff",
    "title" : "Adjusted second data in DIFF orientation, provided by Hartland, United Kingdom (HAD) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "had/best-avail/PT1S/native",
    "title" : "Best-avail second data in the coordinate system of measurement of the data ('native'), provided by Hartland, United Kingdom (HAD) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "had/best-avail/PT1S/xyzf",
    "title" : "Best-avail second data in XYZF orientation, provided by Hartland, United Kingdom (HAD) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "had/best-avail/PT1S/hdzf",
    "title" : "Best-avail second data in HDZF orientation, provided by Hartland, United Kingdom (HAD) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "had/best-avail/PT1S/diff",
    "title" : "Best-avail second data in DIFF orientation, provided by Hartland, United Kingdom (HAD) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "hbk/adjusted/PT1M/native",
    "title" : "Adjusted minute data in the coordinate system of measurement of the data ('native'), provided by Hartebeesthoek, South Africa (HBK) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "hbk/adjusted/PT1M/xyzf",
    "title" : "Adjusted minute data in XYZF orientation, provided by Hartebeesthoek, South Africa (HBK) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "hbk/adjusted/PT1M/hdzf",
    "title" : "Adjusted minute data in HDZF orientation, provided by Hartebeesthoek, South Africa (HBK) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "hbk/adjusted/PT1M/diff",
    "title" : "Adjusted minute data in DIFF orientation, provided by Hartebeesthoek, South Africa (HBK) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "hbk/definitive/PT1M/native",
    "title" : "Definitive minute data in the coordinate system of measurement of the data ('native'), provided by Hartebeesthoek, South Africa (HBK) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "hbk/definitive/PT1M/xyzf",
    "title" : "Definitive minute data in XYZF orientation, provided by Hartebeesthoek, South Africa (HBK) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "hbk/definitive/PT1M/hdzf",
    "title" : "Definitive minute data in HDZF orientation, provided by Hartebeesthoek, South Africa (HBK) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "hbk/definitive/PT1M/diff",
    "title" : "Definitive minute data in DIFF orientation, provided by Hartebeesthoek, South Africa (HBK) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "hbk/reported/PT1M/native",
    "title" : "Reported minute data in the coordinate system of measurement of the data ('native'), provided by Hartebeesthoek, South Africa (HBK) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "hbk/best-avail/PT1M/native",
    "title" : "Best-avail minute data in the coordinate system of measurement of the data ('native'), provided by Hartebeesthoek, South Africa (HBK) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "hbk/best-avail/PT1M/xyzf",
    "title" : "Best-avail minute data in XYZF orientation, provided by Hartebeesthoek, South Africa (HBK) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "hbk/best-avail/PT1M/hdzf",
    "title" : "Best-avail minute data in HDZF orientation, provided by Hartebeesthoek, South Africa (HBK) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "hbk/best-avail/PT1M/diff",
    "title" : "Best-avail minute data in DIFF orientation, provided by Hartebeesthoek, South Africa (HBK) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "hbk/reported/PT1S/native",
    "title" : "Reported second data in the coordinate system of measurement of the data ('native'), provided by Hartebeesthoek, South Africa (HBK) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "hbk/best-avail/PT1S/native",
    "title" : "Best-avail second data in the coordinate system of measurement of the data ('native'), provided by Hartebeesthoek, South Africa (HBK) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "hbk/best-avail/PT1S/xyzf",
    "title" : "Best-avail second data in XYZF orientation, provided by Hartebeesthoek, South Africa (HBK) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "hbk/best-avail/PT1S/hdzf",
    "title" : "Best-avail second data in HDZF orientation, provided by Hartebeesthoek, South Africa (HBK) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "hbk/best-avail/PT1S/diff",
    "title" : "Best-avail second data in DIFF orientation, provided by Hartebeesthoek, South Africa (HBK) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "her/adjusted/PT1M/native",
    "title" : "Adjusted minute data in the coordinate system of measurement of the data ('native'), provided by Hermanus, South Africa (HER) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "her/adjusted/PT1M/xyzf",
    "title" : "Adjusted minute data in XYZF orientation, provided by Hermanus, South Africa (HER) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "her/adjusted/PT1M/hdzf",
    "title" : "Adjusted minute data in HDZF orientation, provided by Hermanus, South Africa (HER) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "her/adjusted/PT1M/diff",
    "title" : "Adjusted minute data in DIFF orientation, provided by Hermanus, South Africa (HER) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "her/definitive/PT1M/native",
    "title" : "Definitive minute data in the coordinate system of measurement of the data ('native'), provided by Hermanus, South Africa (HER) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "her/definitive/PT1M/xyzf",
    "title" : "Definitive minute data in XYZF orientation, provided by Hermanus, South Africa (HER) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "her/definitive/PT1M/hdzf",
    "title" : "Definitive minute data in HDZF orientation, provided by Hermanus, South Africa (HER) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "her/definitive/PT1M/diff",
    "title" : "Definitive minute data in DIFF orientation, provided by Hermanus, South Africa (HER) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "her/quasi-def/PT1M/native",
    "title" : "Quasi-def minute data in the coordinate system of measurement of the data ('native'), provided by Hermanus, South Africa (HER) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "her/quasi-def/PT1M/xyzf",
    "title" : "Quasi-def minute data in XYZF orientation, provided by Hermanus, South Africa (HER) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "her/quasi-def/PT1M/hdzf",
    "title" : "Quasi-def minute data in HDZF orientation, provided by Hermanus, South Africa (HER) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "her/quasi-def/PT1M/diff",
    "title" : "Quasi-def minute data in DIFF orientation, provided by Hermanus, South Africa (HER) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "her/reported/PT1M/native",
    "title" : "Reported minute data in the coordinate system of measurement of the data ('native'), provided by Hermanus, South Africa (HER) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "her/best-avail/PT1M/native",
    "title" : "Best-avail minute data in the coordinate system of measurement of the data ('native'), provided by Hermanus, South Africa (HER) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "her/best-avail/PT1M/xyzf",
    "title" : "Best-avail minute data in XYZF orientation, provided by Hermanus, South Africa (HER) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "her/best-avail/PT1M/hdzf",
    "title" : "Best-avail minute data in HDZF orientation, provided by Hermanus, South Africa (HER) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "her/best-avail/PT1M/diff",
    "title" : "Best-avail minute data in DIFF orientation, provided by Hermanus, South Africa (HER) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "her/reported/PT1S/native",
    "title" : "Reported second data in the coordinate system of measurement of the data ('native'), provided by Hermanus, South Africa (HER) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "her/best-avail/PT1S/native",
    "title" : "Best-avail second data in the coordinate system of measurement of the data ('native'), provided by Hermanus, South Africa (HER) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "her/best-avail/PT1S/xyzf",
    "title" : "Best-avail second data in XYZF orientation, provided by Hermanus, South Africa (HER) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "her/best-avail/PT1S/hdzf",
    "title" : "Best-avail second data in HDZF orientation, provided by Hermanus, South Africa (HER) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "her/best-avail/PT1S/diff",
    "title" : "Best-avail second data in DIFF orientation, provided by Hermanus, South Africa (HER) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "hlp/adjusted/PT1M/native",
    "title" : "Adjusted minute data in the coordinate system of measurement of the data ('native'), provided by Hel Observatory, Poland (HLP) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "hlp/adjusted/PT1M/xyzf",
    "title" : "Adjusted minute data in XYZF orientation, provided by Hel Observatory, Poland (HLP) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "hlp/adjusted/PT1M/hdzf",
    "title" : "Adjusted minute data in HDZF orientation, provided by Hel Observatory, Poland (HLP) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "hlp/adjusted/PT1M/diff",
    "title" : "Adjusted minute data in DIFF orientation, provided by Hel Observatory, Poland (HLP) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "hlp/definitive/PT1M/native",
    "title" : "Definitive minute data in the coordinate system of measurement of the data ('native'), provided by Hel Observatory, Poland (HLP) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "hlp/definitive/PT1M/xyzf",
    "title" : "Definitive minute data in XYZF orientation, provided by Hel Observatory, Poland (HLP) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "hlp/definitive/PT1M/hdzf",
    "title" : "Definitive minute data in HDZF orientation, provided by Hel Observatory, Poland (HLP) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "hlp/definitive/PT1M/diff",
    "title" : "Definitive minute data in DIFF orientation, provided by Hel Observatory, Poland (HLP) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "hlp/quasi-def/PT1M/native",
    "title" : "Quasi-def minute data in the coordinate system of measurement of the data ('native'), provided by Hel Observatory, Poland (HLP) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "hlp/quasi-def/PT1M/xyzf",
    "title" : "Quasi-def minute data in XYZF orientation, provided by Hel Observatory, Poland (HLP) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "hlp/quasi-def/PT1M/hdzf",
    "title" : "Quasi-def minute data in HDZF orientation, provided by Hel Observatory, Poland (HLP) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "hlp/quasi-def/PT1M/diff",
    "title" : "Quasi-def minute data in DIFF orientation, provided by Hel Observatory, Poland (HLP) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "hlp/reported/PT1M/native",
    "title" : "Reported minute data in the coordinate system of measurement of the data ('native'), provided by Hel Observatory, Poland (HLP) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "hlp/best-avail/PT1M/native",
    "title" : "Best-avail minute data in the coordinate system of measurement of the data ('native'), provided by Hel Observatory, Poland (HLP) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "hlp/best-avail/PT1M/xyzf",
    "title" : "Best-avail minute data in XYZF orientation, provided by Hel Observatory, Poland (HLP) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "hlp/best-avail/PT1M/hdzf",
    "title" : "Best-avail minute data in HDZF orientation, provided by Hel Observatory, Poland (HLP) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "hlp/best-avail/PT1M/diff",
    "title" : "Best-avail minute data in DIFF orientation, provided by Hel Observatory, Poland (HLP) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "hlp/adjusted/PT1S/native",
    "title" : "Adjusted second data in the coordinate system of measurement of the data ('native'), provided by Hel Observatory, Poland (HLP) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "hlp/adjusted/PT1S/xyzf",
    "title" : "Adjusted second data in XYZF orientation, provided by Hel Observatory, Poland (HLP) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "hlp/adjusted/PT1S/hdzf",
    "title" : "Adjusted second data in HDZF orientation, provided by Hel Observatory, Poland (HLP) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "hlp/adjusted/PT1S/diff",
    "title" : "Adjusted second data in DIFF orientation, provided by Hel Observatory, Poland (HLP) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "hlp/reported/PT1S/native",
    "title" : "Reported second data in the coordinate system of measurement of the data ('native'), provided by Hel Observatory, Poland (HLP) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "hlp/best-avail/PT1S/native",
    "title" : "Best-avail second data in the coordinate system of measurement of the data ('native'), provided by Hel Observatory, Poland (HLP) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "hlp/best-avail/PT1S/xyzf",
    "title" : "Best-avail second data in XYZF orientation, provided by Hel Observatory, Poland (HLP) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "hlp/best-avail/PT1S/hdzf",
    "title" : "Best-avail second data in HDZF orientation, provided by Hel Observatory, Poland (HLP) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "hlp/best-avail/PT1S/diff",
    "title" : "Best-avail second data in DIFF orientation, provided by Hel Observatory, Poland (HLP) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "hon/adjusted/PT1M/native",
    "title" : "Adjusted minute data in the coordinate system of measurement of the data ('native'), provided by Honolulu, USA (HON) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "hon/adjusted/PT1M/xyzf",
    "title" : "Adjusted minute data in XYZF orientation, provided by Honolulu, USA (HON) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "hon/adjusted/PT1M/hdzf",
    "title" : "Adjusted minute data in HDZF orientation, provided by Honolulu, USA (HON) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "hon/adjusted/PT1M/diff",
    "title" : "Adjusted minute data in DIFF orientation, provided by Honolulu, USA (HON) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "hon/definitive/PT1M/native",
    "title" : "Definitive minute data in the coordinate system of measurement of the data ('native'), provided by Honolulu, USA (HON) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "hon/definitive/PT1M/xyzf",
    "title" : "Definitive minute data in XYZF orientation, provided by Honolulu, USA (HON) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "hon/definitive/PT1M/hdzf",
    "title" : "Definitive minute data in HDZF orientation, provided by Honolulu, USA (HON) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "hon/definitive/PT1M/diff",
    "title" : "Definitive minute data in DIFF orientation, provided by Honolulu, USA (HON) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "hon/quasi-def/PT1M/native",
    "title" : "Quasi-def minute data in the coordinate system of measurement of the data ('native'), provided by Honolulu, USA (HON) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "hon/quasi-def/PT1M/xyzf",
    "title" : "Quasi-def minute data in XYZF orientation, provided by Honolulu, USA (HON) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "hon/quasi-def/PT1M/hdzf",
    "title" : "Quasi-def minute data in HDZF orientation, provided by Honolulu, USA (HON) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "hon/quasi-def/PT1M/diff",
    "title" : "Quasi-def minute data in DIFF orientation, provided by Honolulu, USA (HON) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "hon/reported/PT1M/native",
    "title" : "Reported minute data in the coordinate system of measurement of the data ('native'), provided by Honolulu, USA (HON) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "hon/best-avail/PT1M/native",
    "title" : "Best-avail minute data in the coordinate system of measurement of the data ('native'), provided by Honolulu, USA (HON) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "hon/best-avail/PT1M/xyzf",
    "title" : "Best-avail minute data in XYZF orientation, provided by Honolulu, USA (HON) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "hon/best-avail/PT1M/hdzf",
    "title" : "Best-avail minute data in HDZF orientation, provided by Honolulu, USA (HON) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "hon/best-avail/PT1M/diff",
    "title" : "Best-avail minute data in DIFF orientation, provided by Honolulu, USA (HON) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "hon/adjusted/PT1S/native",
    "title" : "Adjusted second data in the coordinate system of measurement of the data ('native'), provided by Honolulu, USA (HON) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "hon/adjusted/PT1S/xyzf",
    "title" : "Adjusted second data in XYZF orientation, provided by Honolulu, USA (HON) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "hon/adjusted/PT1S/hdzf",
    "title" : "Adjusted second data in HDZF orientation, provided by Honolulu, USA (HON) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "hon/adjusted/PT1S/diff",
    "title" : "Adjusted second data in DIFF orientation, provided by Honolulu, USA (HON) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "hon/reported/PT1S/native",
    "title" : "Reported second data in the coordinate system of measurement of the data ('native'), provided by Honolulu, USA (HON) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "hon/best-avail/PT1S/native",
    "title" : "Best-avail second data in the coordinate system of measurement of the data ('native'), provided by Honolulu, USA (HON) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "hon/best-avail/PT1S/xyzf",
    "title" : "Best-avail second data in XYZF orientation, provided by Honolulu, USA (HON) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "hon/best-avail/PT1S/hdzf",
    "title" : "Best-avail second data in HDZF orientation, provided by Honolulu, USA (HON) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "hon/best-avail/PT1S/diff",
    "title" : "Best-avail second data in DIFF orientation, provided by Honolulu, USA (HON) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "hrb/adjusted/PT1M/native",
    "title" : "Adjusted minute data in the coordinate system of measurement of the data ('native'), provided by Hurbanovo, Slovakia (HRB) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "hrb/adjusted/PT1M/xyzf",
    "title" : "Adjusted minute data in XYZF orientation, provided by Hurbanovo, Slovakia (HRB) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "hrb/adjusted/PT1M/hdzf",
    "title" : "Adjusted minute data in HDZF orientation, provided by Hurbanovo, Slovakia (HRB) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "hrb/adjusted/PT1M/diff",
    "title" : "Adjusted minute data in DIFF orientation, provided by Hurbanovo, Slovakia (HRB) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "hrb/definitive/PT1M/native",
    "title" : "Definitive minute data in the coordinate system of measurement of the data ('native'), provided by Hurbanovo, Slovakia (HRB) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "hrb/definitive/PT1M/xyzf",
    "title" : "Definitive minute data in XYZF orientation, provided by Hurbanovo, Slovakia (HRB) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "hrb/definitive/PT1M/hdzf",
    "title" : "Definitive minute data in HDZF orientation, provided by Hurbanovo, Slovakia (HRB) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "hrb/definitive/PT1M/diff",
    "title" : "Definitive minute data in DIFF orientation, provided by Hurbanovo, Slovakia (HRB) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "hrb/reported/PT1M/native",
    "title" : "Reported minute data in the coordinate system of measurement of the data ('native'), provided by Hurbanovo, Slovakia (HRB) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "hrb/best-avail/PT1M/native",
    "title" : "Best-avail minute data in the coordinate system of measurement of the data ('native'), provided by Hurbanovo, Slovakia (HRB) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "hrb/best-avail/PT1M/xyzf",
    "title" : "Best-avail minute data in XYZF orientation, provided by Hurbanovo, Slovakia (HRB) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "hrb/best-avail/PT1M/hdzf",
    "title" : "Best-avail minute data in HDZF orientation, provided by Hurbanovo, Slovakia (HRB) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "hrb/best-avail/PT1M/diff",
    "title" : "Best-avail minute data in DIFF orientation, provided by Hurbanovo, Slovakia (HRB) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "hrn/definitive/PT1M/native",
    "title" : "Definitive minute data in the coordinate system of measurement of the data ('native'), provided by Hornsund, Svalbard (HRN) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "hrn/definitive/PT1M/xyzf",
    "title" : "Definitive minute data in XYZF orientation, provided by Hornsund, Svalbard (HRN) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "hrn/definitive/PT1M/hdzf",
    "title" : "Definitive minute data in HDZF orientation, provided by Hornsund, Svalbard (HRN) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "hrn/definitive/PT1M/diff",
    "title" : "Definitive minute data in DIFF orientation, provided by Hornsund, Svalbard (HRN) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "hrn/quasi-def/PT1M/native",
    "title" : "Quasi-def minute data in the coordinate system of measurement of the data ('native'), provided by Hornsund, Svalbard (HRN) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "hrn/quasi-def/PT1M/xyzf",
    "title" : "Quasi-def minute data in XYZF orientation, provided by Hornsund, Svalbard (HRN) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "hrn/quasi-def/PT1M/hdzf",
    "title" : "Quasi-def minute data in HDZF orientation, provided by Hornsund, Svalbard (HRN) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "hrn/quasi-def/PT1M/diff",
    "title" : "Quasi-def minute data in DIFF orientation, provided by Hornsund, Svalbard (HRN) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "hrn/reported/PT1M/native",
    "title" : "Reported minute data in the coordinate system of measurement of the data ('native'), provided by Hornsund, Svalbard (HRN) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "hrn/best-avail/PT1M/native",
    "title" : "Best-avail minute data in the coordinate system of measurement of the data ('native'), provided by Hornsund, Svalbard (HRN) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "hrn/best-avail/PT1M/xyzf",
    "title" : "Best-avail minute data in XYZF orientation, provided by Hornsund, Svalbard (HRN) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "hrn/best-avail/PT1M/hdzf",
    "title" : "Best-avail minute data in HDZF orientation, provided by Hornsund, Svalbard (HRN) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "hrn/best-avail/PT1M/diff",
    "title" : "Best-avail minute data in DIFF orientation, provided by Hornsund, Svalbard (HRN) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "hrn/adjusted/PT1S/native",
    "title" : "Adjusted second data in the coordinate system of measurement of the data ('native'), provided by Hornsund, Svalbard (HRN) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "hrn/adjusted/PT1S/xyzf",
    "title" : "Adjusted second data in XYZF orientation, provided by Hornsund, Svalbard (HRN) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "hrn/adjusted/PT1S/hdzf",
    "title" : "Adjusted second data in HDZF orientation, provided by Hornsund, Svalbard (HRN) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "hrn/adjusted/PT1S/diff",
    "title" : "Adjusted second data in DIFF orientation, provided by Hornsund, Svalbard (HRN) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "hrn/reported/PT1S/native",
    "title" : "Reported second data in the coordinate system of measurement of the data ('native'), provided by Hornsund, Svalbard (HRN) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "hrn/best-avail/PT1S/native",
    "title" : "Best-avail second data in the coordinate system of measurement of the data ('native'), provided by Hornsund, Svalbard (HRN) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "hrn/best-avail/PT1S/xyzf",
    "title" : "Best-avail second data in XYZF orientation, provided by Hornsund, Svalbard (HRN) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "hrn/best-avail/PT1S/hdzf",
    "title" : "Best-avail second data in HDZF orientation, provided by Hornsund, Svalbard (HRN) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "hrn/best-avail/PT1S/diff",
    "title" : "Best-avail second data in DIFF orientation, provided by Hornsund, Svalbard (HRN) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "hua/adjusted/PT1M/native",
    "title" : "Adjusted minute data in the coordinate system of measurement of the data ('native'), provided by Huancayo, Peru (HUA) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "hua/adjusted/PT1M/xyzf",
    "title" : "Adjusted minute data in XYZF orientation, provided by Huancayo, Peru (HUA) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "hua/adjusted/PT1M/hdzf",
    "title" : "Adjusted minute data in HDZF orientation, provided by Huancayo, Peru (HUA) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "hua/adjusted/PT1M/diff",
    "title" : "Adjusted minute data in DIFF orientation, provided by Huancayo, Peru (HUA) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "hua/definitive/PT1M/native",
    "title" : "Definitive minute data in the coordinate system of measurement of the data ('native'), provided by Huancayo, Peru (HUA) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "hua/definitive/PT1M/xyzf",
    "title" : "Definitive minute data in XYZF orientation, provided by Huancayo, Peru (HUA) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "hua/definitive/PT1M/hdzf",
    "title" : "Definitive minute data in HDZF orientation, provided by Huancayo, Peru (HUA) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "hua/definitive/PT1M/diff",
    "title" : "Definitive minute data in DIFF orientation, provided by Huancayo, Peru (HUA) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "hua/quasi-def/PT1M/native",
    "title" : "Quasi-def minute data in the coordinate system of measurement of the data ('native'), provided by Huancayo, Peru (HUA) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "hua/quasi-def/PT1M/xyzf",
    "title" : "Quasi-def minute data in XYZF orientation, provided by Huancayo, Peru (HUA) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "hua/quasi-def/PT1M/hdzf",
    "title" : "Quasi-def minute data in HDZF orientation, provided by Huancayo, Peru (HUA) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "hua/quasi-def/PT1M/diff",
    "title" : "Quasi-def minute data in DIFF orientation, provided by Huancayo, Peru (HUA) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "hua/reported/PT1M/native",
    "title" : "Reported minute data in the coordinate system of measurement of the data ('native'), provided by Huancayo, Peru (HUA) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "hua/best-avail/PT1M/native",
    "title" : "Best-avail minute data in the coordinate system of measurement of the data ('native'), provided by Huancayo, Peru (HUA) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "hua/best-avail/PT1M/xyzf",
    "title" : "Best-avail minute data in XYZF orientation, provided by Huancayo, Peru (HUA) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "hua/best-avail/PT1M/hdzf",
    "title" : "Best-avail minute data in HDZF orientation, provided by Huancayo, Peru (HUA) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "hua/best-avail/PT1M/diff",
    "title" : "Best-avail minute data in DIFF orientation, provided by Huancayo, Peru (HUA) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "hyb/adjusted/PT1M/native",
    "title" : "Adjusted minute data in the coordinate system of measurement of the data ('native'), provided by Hyderabad, India (HYB) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "hyb/adjusted/PT1M/xyzf",
    "title" : "Adjusted minute data in XYZF orientation, provided by Hyderabad, India (HYB) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "hyb/adjusted/PT1M/hdzf",
    "title" : "Adjusted minute data in HDZF orientation, provided by Hyderabad, India (HYB) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "hyb/adjusted/PT1M/diff",
    "title" : "Adjusted minute data in DIFF orientation, provided by Hyderabad, India (HYB) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "hyb/definitive/PT1M/native",
    "title" : "Definitive minute data in the coordinate system of measurement of the data ('native'), provided by Hyderabad, India (HYB) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "hyb/definitive/PT1M/xyzf",
    "title" : "Definitive minute data in XYZF orientation, provided by Hyderabad, India (HYB) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "hyb/definitive/PT1M/hdzf",
    "title" : "Definitive minute data in HDZF orientation, provided by Hyderabad, India (HYB) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "hyb/definitive/PT1M/diff",
    "title" : "Definitive minute data in DIFF orientation, provided by Hyderabad, India (HYB) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "hyb/quasi-def/PT1M/native",
    "title" : "Quasi-def minute data in the coordinate system of measurement of the data ('native'), provided by Hyderabad, India (HYB) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "hyb/quasi-def/PT1M/xyzf",
    "title" : "Quasi-def minute data in XYZF orientation, provided by Hyderabad, India (HYB) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "hyb/quasi-def/PT1M/hdzf",
    "title" : "Quasi-def minute data in HDZF orientation, provided by Hyderabad, India (HYB) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "hyb/quasi-def/PT1M/diff",
    "title" : "Quasi-def minute data in DIFF orientation, provided by Hyderabad, India (HYB) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "hyb/reported/PT1M/native",
    "title" : "Reported minute data in the coordinate system of measurement of the data ('native'), provided by Hyderabad, India (HYB) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "hyb/best-avail/PT1M/native",
    "title" : "Best-avail minute data in the coordinate system of measurement of the data ('native'), provided by Hyderabad, India (HYB) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "hyb/best-avail/PT1M/xyzf",
    "title" : "Best-avail minute data in XYZF orientation, provided by Hyderabad, India (HYB) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "hyb/best-avail/PT1M/hdzf",
    "title" : "Best-avail minute data in HDZF orientation, provided by Hyderabad, India (HYB) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "hyb/best-avail/PT1M/diff",
    "title" : "Best-avail minute data in DIFF orientation, provided by Hyderabad, India (HYB) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "ipm/definitive/PT1M/native",
    "title" : "Definitive minute data in the coordinate system of measurement of the data ('native'), provided by Isal de Pascua, Chile (IPM) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "ipm/definitive/PT1M/xyzf",
    "title" : "Definitive minute data in XYZF orientation, provided by Isal de Pascua, Chile (IPM) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "ipm/definitive/PT1M/hdzf",
    "title" : "Definitive minute data in HDZF orientation, provided by Isal de Pascua, Chile (IPM) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "ipm/definitive/PT1M/diff",
    "title" : "Definitive minute data in DIFF orientation, provided by Isal de Pascua, Chile (IPM) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "ipm/quasi-def/PT1M/native",
    "title" : "Quasi-def minute data in the coordinate system of measurement of the data ('native'), provided by Isal de Pascua, Chile (IPM) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "ipm/quasi-def/PT1M/xyzf",
    "title" : "Quasi-def minute data in XYZF orientation, provided by Isal de Pascua, Chile (IPM) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "ipm/quasi-def/PT1M/hdzf",
    "title" : "Quasi-def minute data in HDZF orientation, provided by Isal de Pascua, Chile (IPM) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "ipm/quasi-def/PT1M/diff",
    "title" : "Quasi-def minute data in DIFF orientation, provided by Isal de Pascua, Chile (IPM) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "ipm/reported/PT1M/native",
    "title" : "Reported minute data in the coordinate system of measurement of the data ('native'), provided by Isal de Pascua, Chile (IPM) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "ipm/best-avail/PT1M/native",
    "title" : "Best-avail minute data in the coordinate system of measurement of the data ('native'), provided by Isal de Pascua, Chile (IPM) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "ipm/best-avail/PT1M/xyzf",
    "title" : "Best-avail minute data in XYZF orientation, provided by Isal de Pascua, Chile (IPM) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "ipm/best-avail/PT1M/hdzf",
    "title" : "Best-avail minute data in HDZF orientation, provided by Isal de Pascua, Chile (IPM) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "ipm/best-avail/PT1M/diff",
    "title" : "Best-avail minute data in DIFF orientation, provided by Isal de Pascua, Chile (IPM) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "ipm/quasi-def/PT1S/native",
    "title" : "Quasi-def second data in the coordinate system of measurement of the data ('native'), provided by Isal de Pascua, Chile (IPM) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "ipm/quasi-def/PT1S/xyzf",
    "title" : "Quasi-def second data in XYZF orientation, provided by Isal de Pascua, Chile (IPM) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "ipm/quasi-def/PT1S/hdzf",
    "title" : "Quasi-def second data in HDZF orientation, provided by Isal de Pascua, Chile (IPM) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "ipm/quasi-def/PT1S/diff",
    "title" : "Quasi-def second data in DIFF orientation, provided by Isal de Pascua, Chile (IPM) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "ipm/reported/PT1S/native",
    "title" : "Reported second data in the coordinate system of measurement of the data ('native'), provided by Isal de Pascua, Chile (IPM) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "ipm/best-avail/PT1S/native",
    "title" : "Best-avail second data in the coordinate system of measurement of the data ('native'), provided by Isal de Pascua, Chile (IPM) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "ipm/best-avail/PT1S/xyzf",
    "title" : "Best-avail second data in XYZF orientation, provided by Isal de Pascua, Chile (IPM) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "ipm/best-avail/PT1S/hdzf",
    "title" : "Best-avail second data in HDZF orientation, provided by Isal de Pascua, Chile (IPM) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "ipm/best-avail/PT1S/diff",
    "title" : "Best-avail second data in DIFF orientation, provided by Isal de Pascua, Chile (IPM) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "iqa/definitive/PT1M/native",
    "title" : "Definitive minute data in the coordinate system of measurement of the data ('native'), provided by Iqaluit, Canada (IQA) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "iqa/definitive/PT1M/xyzf",
    "title" : "Definitive minute data in XYZF orientation, provided by Iqaluit, Canada (IQA) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "iqa/definitive/PT1M/hdzf",
    "title" : "Definitive minute data in HDZF orientation, provided by Iqaluit, Canada (IQA) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "iqa/definitive/PT1M/diff",
    "title" : "Definitive minute data in DIFF orientation, provided by Iqaluit, Canada (IQA) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "iqa/reported/PT1M/native",
    "title" : "Reported minute data in the coordinate system of measurement of the data ('native'), provided by Iqaluit, Canada (IQA) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "iqa/best-avail/PT1M/native",
    "title" : "Best-avail minute data in the coordinate system of measurement of the data ('native'), provided by Iqaluit, Canada (IQA) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "iqa/best-avail/PT1M/xyzf",
    "title" : "Best-avail minute data in XYZF orientation, provided by Iqaluit, Canada (IQA) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "iqa/best-avail/PT1M/hdzf",
    "title" : "Best-avail minute data in HDZF orientation, provided by Iqaluit, Canada (IQA) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "iqa/best-avail/PT1M/diff",
    "title" : "Best-avail minute data in DIFF orientation, provided by Iqaluit, Canada (IQA) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "iqa/reported/PT1S/native",
    "title" : "Reported second data in the coordinate system of measurement of the data ('native'), provided by Iqaluit, Canada (IQA) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "iqa/best-avail/PT1S/native",
    "title" : "Best-avail second data in the coordinate system of measurement of the data ('native'), provided by Iqaluit, Canada (IQA) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "iqa/best-avail/PT1S/xyzf",
    "title" : "Best-avail second data in XYZF orientation, provided by Iqaluit, Canada (IQA) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "iqa/best-avail/PT1S/hdzf",
    "title" : "Best-avail second data in HDZF orientation, provided by Iqaluit, Canada (IQA) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "iqa/best-avail/PT1S/diff",
    "title" : "Best-avail second data in DIFF orientation, provided by Iqaluit, Canada (IQA) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "irt/definitive/PT1M/native",
    "title" : "Definitive minute data in the coordinate system of measurement of the data ('native'), provided by Irkutsk (Patrony), Russia (IRT) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "irt/definitive/PT1M/xyzf",
    "title" : "Definitive minute data in XYZF orientation, provided by Irkutsk (Patrony), Russia (IRT) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "irt/definitive/PT1M/hdzf",
    "title" : "Definitive minute data in HDZF orientation, provided by Irkutsk (Patrony), Russia (IRT) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "irt/definitive/PT1M/diff",
    "title" : "Definitive minute data in DIFF orientation, provided by Irkutsk (Patrony), Russia (IRT) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "irt/reported/PT1M/native",
    "title" : "Reported minute data in the coordinate system of measurement of the data ('native'), provided by Irkutsk (Patrony), Russia (IRT) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "irt/best-avail/PT1M/native",
    "title" : "Best-avail minute data in the coordinate system of measurement of the data ('native'), provided by Irkutsk (Patrony), Russia (IRT) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "irt/best-avail/PT1M/xyzf",
    "title" : "Best-avail minute data in XYZF orientation, provided by Irkutsk (Patrony), Russia (IRT) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "irt/best-avail/PT1M/hdzf",
    "title" : "Best-avail minute data in HDZF orientation, provided by Irkutsk (Patrony), Russia (IRT) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "irt/best-avail/PT1M/diff",
    "title" : "Best-avail minute data in DIFF orientation, provided by Irkutsk (Patrony), Russia (IRT) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "isk/reported/PT1M/native",
    "title" : "Reported minute data in the coordinate system of measurement of the data ('native'), provided by Istanbul-Kandili, Turkey (ISK) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "isk/best-avail/PT1M/native",
    "title" : "Best-avail minute data in the coordinate system of measurement of the data ('native'), provided by Istanbul-Kandili, Turkey (ISK) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "isk/best-avail/PT1M/xyzf",
    "title" : "Best-avail minute data in XYZF orientation, provided by Istanbul-Kandili, Turkey (ISK) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "isk/best-avail/PT1M/hdzf",
    "title" : "Best-avail minute data in HDZF orientation, provided by Istanbul-Kandili, Turkey (ISK) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "isk/best-avail/PT1M/diff",
    "title" : "Best-avail minute data in DIFF orientation, provided by Istanbul-Kandili, Turkey (ISK) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "izn/definitive/PT1M/native",
    "title" : "Definitive minute data in the coordinate system of measurement of the data ('native'), provided by Iznik, Turkey (IZN) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "izn/definitive/PT1M/xyzf",
    "title" : "Definitive minute data in XYZF orientation, provided by Iznik, Turkey (IZN) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "izn/definitive/PT1M/hdzf",
    "title" : "Definitive minute data in HDZF orientation, provided by Iznik, Turkey (IZN) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "izn/definitive/PT1M/diff",
    "title" : "Definitive minute data in DIFF orientation, provided by Iznik, Turkey (IZN) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "izn/reported/PT1M/native",
    "title" : "Reported minute data in the coordinate system of measurement of the data ('native'), provided by Iznik, Turkey (IZN) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "izn/best-avail/PT1M/native",
    "title" : "Best-avail minute data in the coordinate system of measurement of the data ('native'), provided by Iznik, Turkey (IZN) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "izn/best-avail/PT1M/xyzf",
    "title" : "Best-avail minute data in XYZF orientation, provided by Iznik, Turkey (IZN) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "izn/best-avail/PT1M/hdzf",
    "title" : "Best-avail minute data in HDZF orientation, provided by Iznik, Turkey (IZN) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "izn/best-avail/PT1M/diff",
    "title" : "Best-avail minute data in DIFF orientation, provided by Iznik, Turkey (IZN) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "jai/definitive/PT1M/native",
    "title" : "Definitive minute data in the coordinate system of measurement of the data ('native'), provided by Jaipur, India (JAI) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "jai/definitive/PT1M/xyzf",
    "title" : "Definitive minute data in XYZF orientation, provided by Jaipur, India (JAI) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "jai/definitive/PT1M/hdzf",
    "title" : "Definitive minute data in HDZF orientation, provided by Jaipur, India (JAI) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "jai/definitive/PT1M/diff",
    "title" : "Definitive minute data in DIFF orientation, provided by Jaipur, India (JAI) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "jai/reported/PT1M/native",
    "title" : "Reported minute data in the coordinate system of measurement of the data ('native'), provided by Jaipur, India (JAI) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "jai/best-avail/PT1M/native",
    "title" : "Best-avail minute data in the coordinate system of measurement of the data ('native'), provided by Jaipur, India (JAI) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "jai/best-avail/PT1M/xyzf",
    "title" : "Best-avail minute data in XYZF orientation, provided by Jaipur, India (JAI) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "jai/best-avail/PT1M/hdzf",
    "title" : "Best-avail minute data in HDZF orientation, provided by Jaipur, India (JAI) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "jai/best-avail/PT1M/diff",
    "title" : "Best-avail minute data in DIFF orientation, provided by Jaipur, India (JAI) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "jco/adjusted/PT1M/native",
    "title" : "Adjusted minute data in the coordinate system of measurement of the data ('native'), provided by Jim Carrigan Observatory, Alaska (JCO) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "jco/adjusted/PT1M/xyzf",
    "title" : "Adjusted minute data in XYZF orientation, provided by Jim Carrigan Observatory, Alaska (JCO) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "jco/adjusted/PT1M/hdzf",
    "title" : "Adjusted minute data in HDZF orientation, provided by Jim Carrigan Observatory, Alaska (JCO) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "jco/adjusted/PT1M/diff",
    "title" : "Adjusted minute data in DIFF orientation, provided by Jim Carrigan Observatory, Alaska (JCO) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "jco/definitive/PT1M/native",
    "title" : "Definitive minute data in the coordinate system of measurement of the data ('native'), provided by Jim Carrigan Observatory, Alaska (JCO) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "jco/definitive/PT1M/xyzf",
    "title" : "Definitive minute data in XYZF orientation, provided by Jim Carrigan Observatory, Alaska (JCO) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "jco/definitive/PT1M/hdzf",
    "title" : "Definitive minute data in HDZF orientation, provided by Jim Carrigan Observatory, Alaska (JCO) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "jco/definitive/PT1M/diff",
    "title" : "Definitive minute data in DIFF orientation, provided by Jim Carrigan Observatory, Alaska (JCO) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "jco/quasi-def/PT1M/native",
    "title" : "Quasi-def minute data in the coordinate system of measurement of the data ('native'), provided by Jim Carrigan Observatory, Alaska (JCO) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "jco/quasi-def/PT1M/xyzf",
    "title" : "Quasi-def minute data in XYZF orientation, provided by Jim Carrigan Observatory, Alaska (JCO) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "jco/quasi-def/PT1M/hdzf",
    "title" : "Quasi-def minute data in HDZF orientation, provided by Jim Carrigan Observatory, Alaska (JCO) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "jco/quasi-def/PT1M/diff",
    "title" : "Quasi-def minute data in DIFF orientation, provided by Jim Carrigan Observatory, Alaska (JCO) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "jco/reported/PT1M/native",
    "title" : "Reported minute data in the coordinate system of measurement of the data ('native'), provided by Jim Carrigan Observatory, Alaska (JCO) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "jco/best-avail/PT1M/native",
    "title" : "Best-avail minute data in the coordinate system of measurement of the data ('native'), provided by Jim Carrigan Observatory, Alaska (JCO) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "jco/best-avail/PT1M/xyzf",
    "title" : "Best-avail minute data in XYZF orientation, provided by Jim Carrigan Observatory, Alaska (JCO) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "jco/best-avail/PT1M/hdzf",
    "title" : "Best-avail minute data in HDZF orientation, provided by Jim Carrigan Observatory, Alaska (JCO) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "jco/best-avail/PT1M/diff",
    "title" : "Best-avail minute data in DIFF orientation, provided by Jim Carrigan Observatory, Alaska (JCO) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "jco/adjusted/PT1S/native",
    "title" : "Adjusted second data in the coordinate system of measurement of the data ('native'), provided by Jim Carrigan Observatory, Alaska (JCO) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "jco/adjusted/PT1S/xyzf",
    "title" : "Adjusted second data in XYZF orientation, provided by Jim Carrigan Observatory, Alaska (JCO) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "jco/adjusted/PT1S/hdzf",
    "title" : "Adjusted second data in HDZF orientation, provided by Jim Carrigan Observatory, Alaska (JCO) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "jco/adjusted/PT1S/diff",
    "title" : "Adjusted second data in DIFF orientation, provided by Jim Carrigan Observatory, Alaska (JCO) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "jco/best-avail/PT1S/native",
    "title" : "Best-avail second data in the coordinate system of measurement of the data ('native'), provided by Jim Carrigan Observatory, Alaska (JCO) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "jco/best-avail/PT1S/xyzf",
    "title" : "Best-avail second data in XYZF orientation, provided by Jim Carrigan Observatory, Alaska (JCO) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "jco/best-avail/PT1S/hdzf",
    "title" : "Best-avail second data in HDZF orientation, provided by Jim Carrigan Observatory, Alaska (JCO) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "jco/best-avail/PT1S/diff",
    "title" : "Best-avail second data in DIFF orientation, provided by Jim Carrigan Observatory, Alaska (JCO) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "kak/adjusted/PT1M/native",
    "title" : "Adjusted minute data in the coordinate system of measurement of the data ('native'), provided by Kakioka, Japan (KAK) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "kak/adjusted/PT1M/xyzf",
    "title" : "Adjusted minute data in XYZF orientation, provided by Kakioka, Japan (KAK) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "kak/adjusted/PT1M/hdzf",
    "title" : "Adjusted minute data in HDZF orientation, provided by Kakioka, Japan (KAK) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "kak/adjusted/PT1M/diff",
    "title" : "Adjusted minute data in DIFF orientation, provided by Kakioka, Japan (KAK) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "kak/definitive/PT1M/native",
    "title" : "Definitive minute data in the coordinate system of measurement of the data ('native'), provided by Kakioka, Japan (KAK) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "kak/definitive/PT1M/xyzf",
    "title" : "Definitive minute data in XYZF orientation, provided by Kakioka, Japan (KAK) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "kak/definitive/PT1M/hdzf",
    "title" : "Definitive minute data in HDZF orientation, provided by Kakioka, Japan (KAK) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "kak/definitive/PT1M/diff",
    "title" : "Definitive minute data in DIFF orientation, provided by Kakioka, Japan (KAK) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "kak/quasi-def/PT1M/native",
    "title" : "Quasi-def minute data in the coordinate system of measurement of the data ('native'), provided by Kakioka, Japan (KAK) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "kak/quasi-def/PT1M/xyzf",
    "title" : "Quasi-def minute data in XYZF orientation, provided by Kakioka, Japan (KAK) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "kak/quasi-def/PT1M/hdzf",
    "title" : "Quasi-def minute data in HDZF orientation, provided by Kakioka, Japan (KAK) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "kak/quasi-def/PT1M/diff",
    "title" : "Quasi-def minute data in DIFF orientation, provided by Kakioka, Japan (KAK) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "kak/reported/PT1M/native",
    "title" : "Reported minute data in the coordinate system of measurement of the data ('native'), provided by Kakioka, Japan (KAK) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "kak/best-avail/PT1M/native",
    "title" : "Best-avail minute data in the coordinate system of measurement of the data ('native'), provided by Kakioka, Japan (KAK) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "kak/best-avail/PT1M/xyzf",
    "title" : "Best-avail minute data in XYZF orientation, provided by Kakioka, Japan (KAK) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "kak/best-avail/PT1M/hdzf",
    "title" : "Best-avail minute data in HDZF orientation, provided by Kakioka, Japan (KAK) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "kak/best-avail/PT1M/diff",
    "title" : "Best-avail minute data in DIFF orientation, provided by Kakioka, Japan (KAK) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "kak/adjusted/PT1S/native",
    "title" : "Adjusted second data in the coordinate system of measurement of the data ('native'), provided by Kakioka, Japan (KAK) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "kak/adjusted/PT1S/xyzf",
    "title" : "Adjusted second data in XYZF orientation, provided by Kakioka, Japan (KAK) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "kak/adjusted/PT1S/hdzf",
    "title" : "Adjusted second data in HDZF orientation, provided by Kakioka, Japan (KAK) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "kak/adjusted/PT1S/diff",
    "title" : "Adjusted second data in DIFF orientation, provided by Kakioka, Japan (KAK) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "kak/best-avail/PT1S/native",
    "title" : "Best-avail second data in the coordinate system of measurement of the data ('native'), provided by Kakioka, Japan (KAK) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "kak/best-avail/PT1S/xyzf",
    "title" : "Best-avail second data in XYZF orientation, provided by Kakioka, Japan (KAK) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "kak/best-avail/PT1S/hdzf",
    "title" : "Best-avail second data in HDZF orientation, provided by Kakioka, Japan (KAK) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "kak/best-avail/PT1S/diff",
    "title" : "Best-avail second data in DIFF orientation, provided by Kakioka, Japan (KAK) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "kdu/adjusted/PT1M/native",
    "title" : "Adjusted minute data in the coordinate system of measurement of the data ('native'), provided by Kakadu, Australia (KDU) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "kdu/adjusted/PT1M/xyzf",
    "title" : "Adjusted minute data in XYZF orientation, provided by Kakadu, Australia (KDU) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "kdu/adjusted/PT1M/hdzf",
    "title" : "Adjusted minute data in HDZF orientation, provided by Kakadu, Australia (KDU) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "kdu/adjusted/PT1M/diff",
    "title" : "Adjusted minute data in DIFF orientation, provided by Kakadu, Australia (KDU) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "kdu/definitive/PT1M/native",
    "title" : "Definitive minute data in the coordinate system of measurement of the data ('native'), provided by Kakadu, Australia (KDU) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "kdu/definitive/PT1M/xyzf",
    "title" : "Definitive minute data in XYZF orientation, provided by Kakadu, Australia (KDU) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "kdu/definitive/PT1M/hdzf",
    "title" : "Definitive minute data in HDZF orientation, provided by Kakadu, Australia (KDU) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "kdu/definitive/PT1M/diff",
    "title" : "Definitive minute data in DIFF orientation, provided by Kakadu, Australia (KDU) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "kdu/quasi-def/PT1M/native",
    "title" : "Quasi-def minute data in the coordinate system of measurement of the data ('native'), provided by Kakadu, Australia (KDU) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "kdu/quasi-def/PT1M/xyzf",
    "title" : "Quasi-def minute data in XYZF orientation, provided by Kakadu, Australia (KDU) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "kdu/quasi-def/PT1M/hdzf",
    "title" : "Quasi-def minute data in HDZF orientation, provided by Kakadu, Australia (KDU) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "kdu/quasi-def/PT1M/diff",
    "title" : "Quasi-def minute data in DIFF orientation, provided by Kakadu, Australia (KDU) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "kdu/reported/PT1M/native",
    "title" : "Reported minute data in the coordinate system of measurement of the data ('native'), provided by Kakadu, Australia (KDU) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "kdu/best-avail/PT1M/native",
    "title" : "Best-avail minute data in the coordinate system of measurement of the data ('native'), provided by Kakadu, Australia (KDU) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "kdu/best-avail/PT1M/xyzf",
    "title" : "Best-avail minute data in XYZF orientation, provided by Kakadu, Australia (KDU) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "kdu/best-avail/PT1M/hdzf",
    "title" : "Best-avail minute data in HDZF orientation, provided by Kakadu, Australia (KDU) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "kdu/best-avail/PT1M/diff",
    "title" : "Best-avail minute data in DIFF orientation, provided by Kakadu, Australia (KDU) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "kdu/adjusted/PT1S/native",
    "title" : "Adjusted second data in the coordinate system of measurement of the data ('native'), provided by Kakadu, Australia (KDU) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "kdu/adjusted/PT1S/xyzf",
    "title" : "Adjusted second data in XYZF orientation, provided by Kakadu, Australia (KDU) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "kdu/adjusted/PT1S/hdzf",
    "title" : "Adjusted second data in HDZF orientation, provided by Kakadu, Australia (KDU) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "kdu/adjusted/PT1S/diff",
    "title" : "Adjusted second data in DIFF orientation, provided by Kakadu, Australia (KDU) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "kdu/quasi-def/PT1S/native",
    "title" : "Quasi-def second data in the coordinate system of measurement of the data ('native'), provided by Kakadu, Australia (KDU) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "kdu/quasi-def/PT1S/xyzf",
    "title" : "Quasi-def second data in XYZF orientation, provided by Kakadu, Australia (KDU) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "kdu/quasi-def/PT1S/hdzf",
    "title" : "Quasi-def second data in HDZF orientation, provided by Kakadu, Australia (KDU) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "kdu/quasi-def/PT1S/diff",
    "title" : "Quasi-def second data in DIFF orientation, provided by Kakadu, Australia (KDU) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "kdu/reported/PT1S/native",
    "title" : "Reported second data in the coordinate system of measurement of the data ('native'), provided by Kakadu, Australia (KDU) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "kdu/best-avail/PT1S/native",
    "title" : "Best-avail second data in the coordinate system of measurement of the data ('native'), provided by Kakadu, Australia (KDU) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "kdu/best-avail/PT1S/xyzf",
    "title" : "Best-avail second data in XYZF orientation, provided by Kakadu, Australia (KDU) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "kdu/best-avail/PT1S/hdzf",
    "title" : "Best-avail second data in HDZF orientation, provided by Kakadu, Australia (KDU) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "kdu/best-avail/PT1S/diff",
    "title" : "Best-avail second data in DIFF orientation, provided by Kakadu, Australia (KDU) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "kep/adjusted/PT1M/native",
    "title" : "Adjusted minute data in the coordinate system of measurement of the data ('native'), provided by King Edward Point, South Georgia (KEP) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "kep/adjusted/PT1M/xyzf",
    "title" : "Adjusted minute data in XYZF orientation, provided by King Edward Point, South Georgia (KEP) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "kep/adjusted/PT1M/hdzf",
    "title" : "Adjusted minute data in HDZF orientation, provided by King Edward Point, South Georgia (KEP) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "kep/adjusted/PT1M/diff",
    "title" : "Adjusted minute data in DIFF orientation, provided by King Edward Point, South Georgia (KEP) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "kep/definitive/PT1M/native",
    "title" : "Definitive minute data in the coordinate system of measurement of the data ('native'), provided by King Edward Point, South Georgia (KEP) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "kep/definitive/PT1M/xyzf",
    "title" : "Definitive minute data in XYZF orientation, provided by King Edward Point, South Georgia (KEP) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "kep/definitive/PT1M/hdzf",
    "title" : "Definitive minute data in HDZF orientation, provided by King Edward Point, South Georgia (KEP) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "kep/definitive/PT1M/diff",
    "title" : "Definitive minute data in DIFF orientation, provided by King Edward Point, South Georgia (KEP) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "kep/quasi-def/PT1M/native",
    "title" : "Quasi-def minute data in the coordinate system of measurement of the data ('native'), provided by King Edward Point, South Georgia (KEP) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "kep/quasi-def/PT1M/xyzf",
    "title" : "Quasi-def minute data in XYZF orientation, provided by King Edward Point, South Georgia (KEP) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "kep/quasi-def/PT1M/hdzf",
    "title" : "Quasi-def minute data in HDZF orientation, provided by King Edward Point, South Georgia (KEP) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "kep/quasi-def/PT1M/diff",
    "title" : "Quasi-def minute data in DIFF orientation, provided by King Edward Point, South Georgia (KEP) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "kep/reported/PT1M/native",
    "title" : "Reported minute data in the coordinate system of measurement of the data ('native'), provided by King Edward Point, South Georgia (KEP) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "kep/best-avail/PT1M/native",
    "title" : "Best-avail minute data in the coordinate system of measurement of the data ('native'), provided by King Edward Point, South Georgia (KEP) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "kep/best-avail/PT1M/xyzf",
    "title" : "Best-avail minute data in XYZF orientation, provided by King Edward Point, South Georgia (KEP) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "kep/best-avail/PT1M/hdzf",
    "title" : "Best-avail minute data in HDZF orientation, provided by King Edward Point, South Georgia (KEP) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "kep/best-avail/PT1M/diff",
    "title" : "Best-avail minute data in DIFF orientation, provided by King Edward Point, South Georgia (KEP) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "kep/adjusted/PT1S/native",
    "title" : "Adjusted second data in the coordinate system of measurement of the data ('native'), provided by King Edward Point, South Georgia (KEP) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "kep/adjusted/PT1S/xyzf",
    "title" : "Adjusted second data in XYZF orientation, provided by King Edward Point, South Georgia (KEP) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "kep/adjusted/PT1S/hdzf",
    "title" : "Adjusted second data in HDZF orientation, provided by King Edward Point, South Georgia (KEP) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "kep/adjusted/PT1S/diff",
    "title" : "Adjusted second data in DIFF orientation, provided by King Edward Point, South Georgia (KEP) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "kep/best-avail/PT1S/native",
    "title" : "Best-avail second data in the coordinate system of measurement of the data ('native'), provided by King Edward Point, South Georgia (KEP) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "kep/best-avail/PT1S/xyzf",
    "title" : "Best-avail second data in XYZF orientation, provided by King Edward Point, South Georgia (KEP) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "kep/best-avail/PT1S/hdzf",
    "title" : "Best-avail second data in HDZF orientation, provided by King Edward Point, South Georgia (KEP) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "kep/best-avail/PT1S/diff",
    "title" : "Best-avail second data in DIFF orientation, provided by King Edward Point, South Georgia (KEP) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "khb/adjusted/PT1M/native",
    "title" : "Adjusted minute data in the coordinate system of measurement of the data ('native'), provided by Khabarovsk, Russia (KHB) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "khb/adjusted/PT1M/xyzf",
    "title" : "Adjusted minute data in XYZF orientation, provided by Khabarovsk, Russia (KHB) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "khb/adjusted/PT1M/hdzf",
    "title" : "Adjusted minute data in HDZF orientation, provided by Khabarovsk, Russia (KHB) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "khb/adjusted/PT1M/diff",
    "title" : "Adjusted minute data in DIFF orientation, provided by Khabarovsk, Russia (KHB) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "khb/definitive/PT1M/native",
    "title" : "Definitive minute data in the coordinate system of measurement of the data ('native'), provided by Khabarovsk, Russia (KHB) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "khb/definitive/PT1M/xyzf",
    "title" : "Definitive minute data in XYZF orientation, provided by Khabarovsk, Russia (KHB) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "khb/definitive/PT1M/hdzf",
    "title" : "Definitive minute data in HDZF orientation, provided by Khabarovsk, Russia (KHB) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "khb/definitive/PT1M/diff",
    "title" : "Definitive minute data in DIFF orientation, provided by Khabarovsk, Russia (KHB) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "khb/quasi-def/PT1M/native",
    "title" : "Quasi-def minute data in the coordinate system of measurement of the data ('native'), provided by Khabarovsk, Russia (KHB) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "khb/quasi-def/PT1M/xyzf",
    "title" : "Quasi-def minute data in XYZF orientation, provided by Khabarovsk, Russia (KHB) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "khb/quasi-def/PT1M/hdzf",
    "title" : "Quasi-def minute data in HDZF orientation, provided by Khabarovsk, Russia (KHB) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "khb/quasi-def/PT1M/diff",
    "title" : "Quasi-def minute data in DIFF orientation, provided by Khabarovsk, Russia (KHB) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "khb/reported/PT1M/native",
    "title" : "Reported minute data in the coordinate system of measurement of the data ('native'), provided by Khabarovsk, Russia (KHB) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "khb/best-avail/PT1M/native",
    "title" : "Best-avail minute data in the coordinate system of measurement of the data ('native'), provided by Khabarovsk, Russia (KHB) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "khb/best-avail/PT1M/xyzf",
    "title" : "Best-avail minute data in XYZF orientation, provided by Khabarovsk, Russia (KHB) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "khb/best-avail/PT1M/hdzf",
    "title" : "Best-avail minute data in HDZF orientation, provided by Khabarovsk, Russia (KHB) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "khb/best-avail/PT1M/diff",
    "title" : "Best-avail minute data in DIFF orientation, provided by Khabarovsk, Russia (KHB) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "kir/adjusted/PT1M/native",
    "title" : "Adjusted minute data in the coordinate system of measurement of the data ('native'), provided by Kiruna, Sweden (KIR) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "kir/adjusted/PT1M/xyzf",
    "title" : "Adjusted minute data in XYZF orientation, provided by Kiruna, Sweden (KIR) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "kir/adjusted/PT1M/hdzf",
    "title" : "Adjusted minute data in HDZF orientation, provided by Kiruna, Sweden (KIR) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "kir/adjusted/PT1M/diff",
    "title" : "Adjusted minute data in DIFF orientation, provided by Kiruna, Sweden (KIR) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "kir/definitive/PT1M/native",
    "title" : "Definitive minute data in the coordinate system of measurement of the data ('native'), provided by Kiruna, Sweden (KIR) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "kir/definitive/PT1M/xyzf",
    "title" : "Definitive minute data in XYZF orientation, provided by Kiruna, Sweden (KIR) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "kir/definitive/PT1M/hdzf",
    "title" : "Definitive minute data in HDZF orientation, provided by Kiruna, Sweden (KIR) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "kir/definitive/PT1M/diff",
    "title" : "Definitive minute data in DIFF orientation, provided by Kiruna, Sweden (KIR) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "kir/quasi-def/PT1M/native",
    "title" : "Quasi-def minute data in the coordinate system of measurement of the data ('native'), provided by Kiruna, Sweden (KIR) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "kir/quasi-def/PT1M/xyzf",
    "title" : "Quasi-def minute data in XYZF orientation, provided by Kiruna, Sweden (KIR) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "kir/quasi-def/PT1M/hdzf",
    "title" : "Quasi-def minute data in HDZF orientation, provided by Kiruna, Sweden (KIR) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "kir/quasi-def/PT1M/diff",
    "title" : "Quasi-def minute data in DIFF orientation, provided by Kiruna, Sweden (KIR) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "kir/reported/PT1M/native",
    "title" : "Reported minute data in the coordinate system of measurement of the data ('native'), provided by Kiruna, Sweden (KIR) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "kir/best-avail/PT1M/native",
    "title" : "Best-avail minute data in the coordinate system of measurement of the data ('native'), provided by Kiruna, Sweden (KIR) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "kir/best-avail/PT1M/xyzf",
    "title" : "Best-avail minute data in XYZF orientation, provided by Kiruna, Sweden (KIR) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "kir/best-avail/PT1M/hdzf",
    "title" : "Best-avail minute data in HDZF orientation, provided by Kiruna, Sweden (KIR) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "kir/best-avail/PT1M/diff",
    "title" : "Best-avail minute data in DIFF orientation, provided by Kiruna, Sweden (KIR) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "kir/adjusted/PT1S/native",
    "title" : "Adjusted second data in the coordinate system of measurement of the data ('native'), provided by Kiruna, Sweden (KIR) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "kir/adjusted/PT1S/xyzf",
    "title" : "Adjusted second data in XYZF orientation, provided by Kiruna, Sweden (KIR) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "kir/adjusted/PT1S/hdzf",
    "title" : "Adjusted second data in HDZF orientation, provided by Kiruna, Sweden (KIR) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "kir/adjusted/PT1S/diff",
    "title" : "Adjusted second data in DIFF orientation, provided by Kiruna, Sweden (KIR) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "kir/quasi-def/PT1S/native",
    "title" : "Quasi-def second data in the coordinate system of measurement of the data ('native'), provided by Kiruna, Sweden (KIR) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "kir/quasi-def/PT1S/xyzf",
    "title" : "Quasi-def second data in XYZF orientation, provided by Kiruna, Sweden (KIR) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "kir/quasi-def/PT1S/hdzf",
    "title" : "Quasi-def second data in HDZF orientation, provided by Kiruna, Sweden (KIR) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "kir/quasi-def/PT1S/diff",
    "title" : "Quasi-def second data in DIFF orientation, provided by Kiruna, Sweden (KIR) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "kir/best-avail/PT1S/native",
    "title" : "Best-avail second data in the coordinate system of measurement of the data ('native'), provided by Kiruna, Sweden (KIR) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "kir/best-avail/PT1S/xyzf",
    "title" : "Best-avail second data in XYZF orientation, provided by Kiruna, Sweden (KIR) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "kir/best-avail/PT1S/hdzf",
    "title" : "Best-avail second data in HDZF orientation, provided by Kiruna, Sweden (KIR) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "kir/best-avail/PT1S/diff",
    "title" : "Best-avail second data in DIFF orientation, provided by Kiruna, Sweden (KIR) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "kiv/adjusted/PT1M/native",
    "title" : "Adjusted minute data in the coordinate system of measurement of the data ('native'), provided by Kiev Dymer, Ukraine (KIV) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "kiv/adjusted/PT1M/xyzf",
    "title" : "Adjusted minute data in XYZF orientation, provided by Kiev Dymer, Ukraine (KIV) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "kiv/adjusted/PT1M/hdzf",
    "title" : "Adjusted minute data in HDZF orientation, provided by Kiev Dymer, Ukraine (KIV) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "kiv/adjusted/PT1M/diff",
    "title" : "Adjusted minute data in DIFF orientation, provided by Kiev Dymer, Ukraine (KIV) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "kiv/definitive/PT1M/native",
    "title" : "Definitive minute data in the coordinate system of measurement of the data ('native'), provided by Kiev Dymer, Ukraine (KIV) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "kiv/definitive/PT1M/xyzf",
    "title" : "Definitive minute data in XYZF orientation, provided by Kiev Dymer, Ukraine (KIV) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "kiv/definitive/PT1M/hdzf",
    "title" : "Definitive minute data in HDZF orientation, provided by Kiev Dymer, Ukraine (KIV) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "kiv/definitive/PT1M/diff",
    "title" : "Definitive minute data in DIFF orientation, provided by Kiev Dymer, Ukraine (KIV) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "kiv/reported/PT1M/native",
    "title" : "Reported minute data in the coordinate system of measurement of the data ('native'), provided by Kiev Dymer, Ukraine (KIV) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "kiv/best-avail/PT1M/native",
    "title" : "Best-avail minute data in the coordinate system of measurement of the data ('native'), provided by Kiev Dymer, Ukraine (KIV) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "kiv/best-avail/PT1M/xyzf",
    "title" : "Best-avail minute data in XYZF orientation, provided by Kiev Dymer, Ukraine (KIV) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "kiv/best-avail/PT1M/hdzf",
    "title" : "Best-avail minute data in HDZF orientation, provided by Kiev Dymer, Ukraine (KIV) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "kiv/best-avail/PT1M/diff",
    "title" : "Best-avail minute data in DIFF orientation, provided by Kiev Dymer, Ukraine (KIV) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "kmh/adjusted/PT1M/native",
    "title" : "Adjusted minute data in the coordinate system of measurement of the data ('native'), provided by Keetsmanshoop, Namibia (KMH) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "kmh/adjusted/PT1M/xyzf",
    "title" : "Adjusted minute data in XYZF orientation, provided by Keetsmanshoop, Namibia (KMH) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "kmh/adjusted/PT1M/hdzf",
    "title" : "Adjusted minute data in HDZF orientation, provided by Keetsmanshoop, Namibia (KMH) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "kmh/adjusted/PT1M/diff",
    "title" : "Adjusted minute data in DIFF orientation, provided by Keetsmanshoop, Namibia (KMH) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "kmh/definitive/PT1M/native",
    "title" : "Definitive minute data in the coordinate system of measurement of the data ('native'), provided by Keetsmanshoop, Namibia (KMH) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "kmh/definitive/PT1M/xyzf",
    "title" : "Definitive minute data in XYZF orientation, provided by Keetsmanshoop, Namibia (KMH) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "kmh/definitive/PT1M/hdzf",
    "title" : "Definitive minute data in HDZF orientation, provided by Keetsmanshoop, Namibia (KMH) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "kmh/definitive/PT1M/diff",
    "title" : "Definitive minute data in DIFF orientation, provided by Keetsmanshoop, Namibia (KMH) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "kmh/quasi-def/PT1M/native",
    "title" : "Quasi-def minute data in the coordinate system of measurement of the data ('native'), provided by Keetsmanshoop, Namibia (KMH) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "kmh/quasi-def/PT1M/xyzf",
    "title" : "Quasi-def minute data in XYZF orientation, provided by Keetsmanshoop, Namibia (KMH) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "kmh/quasi-def/PT1M/hdzf",
    "title" : "Quasi-def minute data in HDZF orientation, provided by Keetsmanshoop, Namibia (KMH) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "kmh/quasi-def/PT1M/diff",
    "title" : "Quasi-def minute data in DIFF orientation, provided by Keetsmanshoop, Namibia (KMH) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "kmh/reported/PT1M/native",
    "title" : "Reported minute data in the coordinate system of measurement of the data ('native'), provided by Keetsmanshoop, Namibia (KMH) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "kmh/best-avail/PT1M/native",
    "title" : "Best-avail minute data in the coordinate system of measurement of the data ('native'), provided by Keetsmanshoop, Namibia (KMH) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "kmh/best-avail/PT1M/xyzf",
    "title" : "Best-avail minute data in XYZF orientation, provided by Keetsmanshoop, Namibia (KMH) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "kmh/best-avail/PT1M/hdzf",
    "title" : "Best-avail minute data in HDZF orientation, provided by Keetsmanshoop, Namibia (KMH) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "kmh/best-avail/PT1M/diff",
    "title" : "Best-avail minute data in DIFF orientation, provided by Keetsmanshoop, Namibia (KMH) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "kmh/reported/PT1S/native",
    "title" : "Reported second data in the coordinate system of measurement of the data ('native'), provided by Keetsmanshoop, Namibia (KMH) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "kmh/best-avail/PT1S/native",
    "title" : "Best-avail second data in the coordinate system of measurement of the data ('native'), provided by Keetsmanshoop, Namibia (KMH) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "kmh/best-avail/PT1S/xyzf",
    "title" : "Best-avail second data in XYZF orientation, provided by Keetsmanshoop, Namibia (KMH) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "kmh/best-avail/PT1S/hdzf",
    "title" : "Best-avail second data in HDZF orientation, provided by Keetsmanshoop, Namibia (KMH) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "kmh/best-avail/PT1S/diff",
    "title" : "Best-avail second data in DIFF orientation, provided by Keetsmanshoop, Namibia (KMH) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "kny/adjusted/PT1M/native",
    "title" : "Adjusted minute data in the coordinate system of measurement of the data ('native'), provided by Kanoya, Japan (KNY) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "kny/adjusted/PT1M/xyzf",
    "title" : "Adjusted minute data in XYZF orientation, provided by Kanoya, Japan (KNY) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "kny/adjusted/PT1M/hdzf",
    "title" : "Adjusted minute data in HDZF orientation, provided by Kanoya, Japan (KNY) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "kny/adjusted/PT1M/diff",
    "title" : "Adjusted minute data in DIFF orientation, provided by Kanoya, Japan (KNY) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "kny/definitive/PT1M/native",
    "title" : "Definitive minute data in the coordinate system of measurement of the data ('native'), provided by Kanoya, Japan (KNY) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "kny/definitive/PT1M/xyzf",
    "title" : "Definitive minute data in XYZF orientation, provided by Kanoya, Japan (KNY) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "kny/definitive/PT1M/hdzf",
    "title" : "Definitive minute data in HDZF orientation, provided by Kanoya, Japan (KNY) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "kny/definitive/PT1M/diff",
    "title" : "Definitive minute data in DIFF orientation, provided by Kanoya, Japan (KNY) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "kny/quasi-def/PT1M/native",
    "title" : "Quasi-def minute data in the coordinate system of measurement of the data ('native'), provided by Kanoya, Japan (KNY) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "kny/quasi-def/PT1M/xyzf",
    "title" : "Quasi-def minute data in XYZF orientation, provided by Kanoya, Japan (KNY) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "kny/quasi-def/PT1M/hdzf",
    "title" : "Quasi-def minute data in HDZF orientation, provided by Kanoya, Japan (KNY) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "kny/quasi-def/PT1M/diff",
    "title" : "Quasi-def minute data in DIFF orientation, provided by Kanoya, Japan (KNY) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "kny/reported/PT1M/native",
    "title" : "Reported minute data in the coordinate system of measurement of the data ('native'), provided by Kanoya, Japan (KNY) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "kny/best-avail/PT1M/native",
    "title" : "Best-avail minute data in the coordinate system of measurement of the data ('native'), provided by Kanoya, Japan (KNY) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "kny/best-avail/PT1M/xyzf",
    "title" : "Best-avail minute data in XYZF orientation, provided by Kanoya, Japan (KNY) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "kny/best-avail/PT1M/hdzf",
    "title" : "Best-avail minute data in HDZF orientation, provided by Kanoya, Japan (KNY) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "kny/best-avail/PT1M/diff",
    "title" : "Best-avail minute data in DIFF orientation, provided by Kanoya, Japan (KNY) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "kny/adjusted/PT1S/native",
    "title" : "Adjusted second data in the coordinate system of measurement of the data ('native'), provided by Kanoya, Japan (KNY) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "kny/adjusted/PT1S/xyzf",
    "title" : "Adjusted second data in XYZF orientation, provided by Kanoya, Japan (KNY) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "kny/adjusted/PT1S/hdzf",
    "title" : "Adjusted second data in HDZF orientation, provided by Kanoya, Japan (KNY) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "kny/adjusted/PT1S/diff",
    "title" : "Adjusted second data in DIFF orientation, provided by Kanoya, Japan (KNY) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "kny/best-avail/PT1S/native",
    "title" : "Best-avail second data in the coordinate system of measurement of the data ('native'), provided by Kanoya, Japan (KNY) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "kny/best-avail/PT1S/xyzf",
    "title" : "Best-avail second data in XYZF orientation, provided by Kanoya, Japan (KNY) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "kny/best-avail/PT1S/hdzf",
    "title" : "Best-avail second data in HDZF orientation, provided by Kanoya, Japan (KNY) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "kny/best-avail/PT1S/diff",
    "title" : "Best-avail second data in DIFF orientation, provided by Kanoya, Japan (KNY) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "kou/definitive/PT1M/native",
    "title" : "Definitive minute data in the coordinate system of measurement of the data ('native'), provided by Kourou, Guyana, France (KOU) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "kou/definitive/PT1M/xyzf",
    "title" : "Definitive minute data in XYZF orientation, provided by Kourou, Guyana, France (KOU) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "kou/definitive/PT1M/hdzf",
    "title" : "Definitive minute data in HDZF orientation, provided by Kourou, Guyana, France (KOU) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "kou/definitive/PT1M/diff",
    "title" : "Definitive minute data in DIFF orientation, provided by Kourou, Guyana, France (KOU) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "kou/quasi-def/PT1M/native",
    "title" : "Quasi-def minute data in the coordinate system of measurement of the data ('native'), provided by Kourou, Guyana, France (KOU) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "kou/quasi-def/PT1M/xyzf",
    "title" : "Quasi-def minute data in XYZF orientation, provided by Kourou, Guyana, France (KOU) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "kou/quasi-def/PT1M/hdzf",
    "title" : "Quasi-def minute data in HDZF orientation, provided by Kourou, Guyana, France (KOU) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "kou/quasi-def/PT1M/diff",
    "title" : "Quasi-def minute data in DIFF orientation, provided by Kourou, Guyana, France (KOU) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "kou/reported/PT1M/native",
    "title" : "Reported minute data in the coordinate system of measurement of the data ('native'), provided by Kourou, Guyana, France (KOU) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "kou/best-avail/PT1M/native",
    "title" : "Best-avail minute data in the coordinate system of measurement of the data ('native'), provided by Kourou, Guyana, France (KOU) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "kou/best-avail/PT1M/xyzf",
    "title" : "Best-avail minute data in XYZF orientation, provided by Kourou, Guyana, France (KOU) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "kou/best-avail/PT1M/hdzf",
    "title" : "Best-avail minute data in HDZF orientation, provided by Kourou, Guyana, France (KOU) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "kou/best-avail/PT1M/diff",
    "title" : "Best-avail minute data in DIFF orientation, provided by Kourou, Guyana, France (KOU) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "kou/quasi-def/PT1S/native",
    "title" : "Quasi-def second data in the coordinate system of measurement of the data ('native'), provided by Kourou, Guyana, France (KOU) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "kou/quasi-def/PT1S/xyzf",
    "title" : "Quasi-def second data in XYZF orientation, provided by Kourou, Guyana, France (KOU) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "kou/quasi-def/PT1S/hdzf",
    "title" : "Quasi-def second data in HDZF orientation, provided by Kourou, Guyana, France (KOU) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "kou/quasi-def/PT1S/diff",
    "title" : "Quasi-def second data in DIFF orientation, provided by Kourou, Guyana, France (KOU) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "kou/reported/PT1S/native",
    "title" : "Reported second data in the coordinate system of measurement of the data ('native'), provided by Kourou, Guyana, France (KOU) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "kou/best-avail/PT1S/native",
    "title" : "Best-avail second data in the coordinate system of measurement of the data ('native'), provided by Kourou, Guyana, France (KOU) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "kou/best-avail/PT1S/xyzf",
    "title" : "Best-avail second data in XYZF orientation, provided by Kourou, Guyana, France (KOU) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "kou/best-avail/PT1S/hdzf",
    "title" : "Best-avail second data in HDZF orientation, provided by Kourou, Guyana, France (KOU) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "kou/best-avail/PT1S/diff",
    "title" : "Best-avail second data in DIFF orientation, provided by Kourou, Guyana, France (KOU) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "ler/adjusted/PT1M/native",
    "title" : "Adjusted minute data in the coordinate system of measurement of the data ('native'), provided by Lerwick, United Kingdom (LER) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "ler/adjusted/PT1M/xyzf",
    "title" : "Adjusted minute data in XYZF orientation, provided by Lerwick, United Kingdom (LER) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "ler/adjusted/PT1M/hdzf",
    "title" : "Adjusted minute data in HDZF orientation, provided by Lerwick, United Kingdom (LER) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "ler/adjusted/PT1M/diff",
    "title" : "Adjusted minute data in DIFF orientation, provided by Lerwick, United Kingdom (LER) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "ler/definitive/PT1M/native",
    "title" : "Definitive minute data in the coordinate system of measurement of the data ('native'), provided by Lerwick, United Kingdom (LER) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "ler/definitive/PT1M/xyzf",
    "title" : "Definitive minute data in XYZF orientation, provided by Lerwick, United Kingdom (LER) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "ler/definitive/PT1M/hdzf",
    "title" : "Definitive minute data in HDZF orientation, provided by Lerwick, United Kingdom (LER) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "ler/definitive/PT1M/diff",
    "title" : "Definitive minute data in DIFF orientation, provided by Lerwick, United Kingdom (LER) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "ler/quasi-def/PT1M/native",
    "title" : "Quasi-def minute data in the coordinate system of measurement of the data ('native'), provided by Lerwick, United Kingdom (LER) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "ler/quasi-def/PT1M/xyzf",
    "title" : "Quasi-def minute data in XYZF orientation, provided by Lerwick, United Kingdom (LER) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "ler/quasi-def/PT1M/hdzf",
    "title" : "Quasi-def minute data in HDZF orientation, provided by Lerwick, United Kingdom (LER) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "ler/quasi-def/PT1M/diff",
    "title" : "Quasi-def minute data in DIFF orientation, provided by Lerwick, United Kingdom (LER) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "ler/reported/PT1M/native",
    "title" : "Reported minute data in the coordinate system of measurement of the data ('native'), provided by Lerwick, United Kingdom (LER) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "ler/best-avail/PT1M/native",
    "title" : "Best-avail minute data in the coordinate system of measurement of the data ('native'), provided by Lerwick, United Kingdom (LER) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "ler/best-avail/PT1M/xyzf",
    "title" : "Best-avail minute data in XYZF orientation, provided by Lerwick, United Kingdom (LER) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "ler/best-avail/PT1M/hdzf",
    "title" : "Best-avail minute data in HDZF orientation, provided by Lerwick, United Kingdom (LER) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "ler/best-avail/PT1M/diff",
    "title" : "Best-avail minute data in DIFF orientation, provided by Lerwick, United Kingdom (LER) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "ler/adjusted/PT1S/native",
    "title" : "Adjusted second data in the coordinate system of measurement of the data ('native'), provided by Lerwick, United Kingdom (LER) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "ler/adjusted/PT1S/xyzf",
    "title" : "Adjusted second data in XYZF orientation, provided by Lerwick, United Kingdom (LER) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "ler/adjusted/PT1S/hdzf",
    "title" : "Adjusted second data in HDZF orientation, provided by Lerwick, United Kingdom (LER) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "ler/adjusted/PT1S/diff",
    "title" : "Adjusted second data in DIFF orientation, provided by Lerwick, United Kingdom (LER) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "ler/best-avail/PT1S/native",
    "title" : "Best-avail second data in the coordinate system of measurement of the data ('native'), provided by Lerwick, United Kingdom (LER) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "ler/best-avail/PT1S/xyzf",
    "title" : "Best-avail second data in XYZF orientation, provided by Lerwick, United Kingdom (LER) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "ler/best-avail/PT1S/hdzf",
    "title" : "Best-avail second data in HDZF orientation, provided by Lerwick, United Kingdom (LER) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "ler/best-avail/PT1S/diff",
    "title" : "Best-avail second data in DIFF orientation, provided by Lerwick, United Kingdom (LER) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "lnp/definitive/PT1M/native",
    "title" : "Definitive minute data in the coordinate system of measurement of the data ('native'), provided by Lunping, Taiwan (LNP) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "lnp/definitive/PT1M/xyzf",
    "title" : "Definitive minute data in XYZF orientation, provided by Lunping, Taiwan (LNP) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "lnp/definitive/PT1M/hdzf",
    "title" : "Definitive minute data in HDZF orientation, provided by Lunping, Taiwan (LNP) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "lnp/definitive/PT1M/diff",
    "title" : "Definitive minute data in DIFF orientation, provided by Lunping, Taiwan (LNP) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "lnp/reported/PT1M/native",
    "title" : "Reported minute data in the coordinate system of measurement of the data ('native'), provided by Lunping, Taiwan (LNP) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "lnp/best-avail/PT1M/native",
    "title" : "Best-avail minute data in the coordinate system of measurement of the data ('native'), provided by Lunping, Taiwan (LNP) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "lnp/best-avail/PT1M/xyzf",
    "title" : "Best-avail minute data in XYZF orientation, provided by Lunping, Taiwan (LNP) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "lnp/best-avail/PT1M/hdzf",
    "title" : "Best-avail minute data in HDZF orientation, provided by Lunping, Taiwan (LNP) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "lnp/best-avail/PT1M/diff",
    "title" : "Best-avail minute data in DIFF orientation, provided by Lunping, Taiwan (LNP) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "lon/adjusted/PT1M/native",
    "title" : "Adjusted minute data in the coordinate system of measurement of the data ('native'), provided by Lonjsko Polje, Croatia (LON) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "lon/adjusted/PT1M/xyzf",
    "title" : "Adjusted minute data in XYZF orientation, provided by Lonjsko Polje, Croatia (LON) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "lon/adjusted/PT1M/hdzf",
    "title" : "Adjusted minute data in HDZF orientation, provided by Lonjsko Polje, Croatia (LON) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "lon/adjusted/PT1M/diff",
    "title" : "Adjusted minute data in DIFF orientation, provided by Lonjsko Polje, Croatia (LON) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "lon/definitive/PT1M/native",
    "title" : "Definitive minute data in the coordinate system of measurement of the data ('native'), provided by Lonjsko Polje, Croatia (LON) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "lon/definitive/PT1M/xyzf",
    "title" : "Definitive minute data in XYZF orientation, provided by Lonjsko Polje, Croatia (LON) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "lon/definitive/PT1M/hdzf",
    "title" : "Definitive minute data in HDZF orientation, provided by Lonjsko Polje, Croatia (LON) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "lon/definitive/PT1M/diff",
    "title" : "Definitive minute data in DIFF orientation, provided by Lonjsko Polje, Croatia (LON) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "lon/quasi-def/PT1M/native",
    "title" : "Quasi-def minute data in the coordinate system of measurement of the data ('native'), provided by Lonjsko Polje, Croatia (LON) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "lon/quasi-def/PT1M/xyzf",
    "title" : "Quasi-def minute data in XYZF orientation, provided by Lonjsko Polje, Croatia (LON) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "lon/quasi-def/PT1M/hdzf",
    "title" : "Quasi-def minute data in HDZF orientation, provided by Lonjsko Polje, Croatia (LON) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "lon/quasi-def/PT1M/diff",
    "title" : "Quasi-def minute data in DIFF orientation, provided by Lonjsko Polje, Croatia (LON) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "lon/reported/PT1M/native",
    "title" : "Reported minute data in the coordinate system of measurement of the data ('native'), provided by Lonjsko Polje, Croatia (LON) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "lon/best-avail/PT1M/native",
    "title" : "Best-avail minute data in the coordinate system of measurement of the data ('native'), provided by Lonjsko Polje, Croatia (LON) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "lon/best-avail/PT1M/xyzf",
    "title" : "Best-avail minute data in XYZF orientation, provided by Lonjsko Polje, Croatia (LON) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "lon/best-avail/PT1M/hdzf",
    "title" : "Best-avail minute data in HDZF orientation, provided by Lonjsko Polje, Croatia (LON) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "lon/best-avail/PT1M/diff",
    "title" : "Best-avail minute data in DIFF orientation, provided by Lonjsko Polje, Croatia (LON) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "lon/adjusted/PT1S/native",
    "title" : "Adjusted second data in the coordinate system of measurement of the data ('native'), provided by Lonjsko Polje, Croatia (LON) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "lon/adjusted/PT1S/xyzf",
    "title" : "Adjusted second data in XYZF orientation, provided by Lonjsko Polje, Croatia (LON) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "lon/adjusted/PT1S/hdzf",
    "title" : "Adjusted second data in HDZF orientation, provided by Lonjsko Polje, Croatia (LON) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "lon/adjusted/PT1S/diff",
    "title" : "Adjusted second data in DIFF orientation, provided by Lonjsko Polje, Croatia (LON) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "lon/best-avail/PT1S/native",
    "title" : "Best-avail second data in the coordinate system of measurement of the data ('native'), provided by Lonjsko Polje, Croatia (LON) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "lon/best-avail/PT1S/xyzf",
    "title" : "Best-avail second data in XYZF orientation, provided by Lonjsko Polje, Croatia (LON) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "lon/best-avail/PT1S/hdzf",
    "title" : "Best-avail second data in HDZF orientation, provided by Lonjsko Polje, Croatia (LON) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "lon/best-avail/PT1S/diff",
    "title" : "Best-avail second data in DIFF orientation, provided by Lonjsko Polje, Croatia (LON) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "lov/adjusted/PT1M/native",
    "title" : "Adjusted minute data in the coordinate system of measurement of the data ('native'), provided by Lovo, Sweden (LOV) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "lov/adjusted/PT1M/xyzf",
    "title" : "Adjusted minute data in XYZF orientation, provided by Lovo, Sweden (LOV) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "lov/adjusted/PT1M/hdzf",
    "title" : "Adjusted minute data in HDZF orientation, provided by Lovo, Sweden (LOV) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "lov/adjusted/PT1M/diff",
    "title" : "Adjusted minute data in DIFF orientation, provided by Lovo, Sweden (LOV) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "lov/definitive/PT1M/native",
    "title" : "Definitive minute data in the coordinate system of measurement of the data ('native'), provided by Lovo, Sweden (LOV) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "lov/definitive/PT1M/xyzf",
    "title" : "Definitive minute data in XYZF orientation, provided by Lovo, Sweden (LOV) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "lov/definitive/PT1M/hdzf",
    "title" : "Definitive minute data in HDZF orientation, provided by Lovo, Sweden (LOV) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "lov/definitive/PT1M/diff",
    "title" : "Definitive minute data in DIFF orientation, provided by Lovo, Sweden (LOV) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "lov/reported/PT1M/native",
    "title" : "Reported minute data in the coordinate system of measurement of the data ('native'), provided by Lovo, Sweden (LOV) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "lov/best-avail/PT1M/native",
    "title" : "Best-avail minute data in the coordinate system of measurement of the data ('native'), provided by Lovo, Sweden (LOV) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "lov/best-avail/PT1M/xyzf",
    "title" : "Best-avail minute data in XYZF orientation, provided by Lovo, Sweden (LOV) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "lov/best-avail/PT1M/hdzf",
    "title" : "Best-avail minute data in HDZF orientation, provided by Lovo, Sweden (LOV) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "lov/best-avail/PT1M/diff",
    "title" : "Best-avail minute data in DIFF orientation, provided by Lovo, Sweden (LOV) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "lrm/adjusted/PT1M/native",
    "title" : "Adjusted minute data in the coordinate system of measurement of the data ('native'), provided by Learmonth, Australia (LRM) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "lrm/adjusted/PT1M/xyzf",
    "title" : "Adjusted minute data in XYZF orientation, provided by Learmonth, Australia (LRM) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "lrm/adjusted/PT1M/hdzf",
    "title" : "Adjusted minute data in HDZF orientation, provided by Learmonth, Australia (LRM) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "lrm/adjusted/PT1M/diff",
    "title" : "Adjusted minute data in DIFF orientation, provided by Learmonth, Australia (LRM) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "lrm/definitive/PT1M/native",
    "title" : "Definitive minute data in the coordinate system of measurement of the data ('native'), provided by Learmonth, Australia (LRM) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "lrm/definitive/PT1M/xyzf",
    "title" : "Definitive minute data in XYZF orientation, provided by Learmonth, Australia (LRM) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "lrm/definitive/PT1M/hdzf",
    "title" : "Definitive minute data in HDZF orientation, provided by Learmonth, Australia (LRM) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "lrm/definitive/PT1M/diff",
    "title" : "Definitive minute data in DIFF orientation, provided by Learmonth, Australia (LRM) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "lrm/quasi-def/PT1M/native",
    "title" : "Quasi-def minute data in the coordinate system of measurement of the data ('native'), provided by Learmonth, Australia (LRM) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "lrm/quasi-def/PT1M/xyzf",
    "title" : "Quasi-def minute data in XYZF orientation, provided by Learmonth, Australia (LRM) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "lrm/quasi-def/PT1M/hdzf",
    "title" : "Quasi-def minute data in HDZF orientation, provided by Learmonth, Australia (LRM) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "lrm/quasi-def/PT1M/diff",
    "title" : "Quasi-def minute data in DIFF orientation, provided by Learmonth, Australia (LRM) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "lrm/reported/PT1M/native",
    "title" : "Reported minute data in the coordinate system of measurement of the data ('native'), provided by Learmonth, Australia (LRM) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "lrm/best-avail/PT1M/native",
    "title" : "Best-avail minute data in the coordinate system of measurement of the data ('native'), provided by Learmonth, Australia (LRM) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "lrm/best-avail/PT1M/xyzf",
    "title" : "Best-avail minute data in XYZF orientation, provided by Learmonth, Australia (LRM) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "lrm/best-avail/PT1M/hdzf",
    "title" : "Best-avail minute data in HDZF orientation, provided by Learmonth, Australia (LRM) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "lrm/best-avail/PT1M/diff",
    "title" : "Best-avail minute data in DIFF orientation, provided by Learmonth, Australia (LRM) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "lrm/adjusted/PT1S/native",
    "title" : "Adjusted second data in the coordinate system of measurement of the data ('native'), provided by Learmonth, Australia (LRM) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "lrm/adjusted/PT1S/xyzf",
    "title" : "Adjusted second data in XYZF orientation, provided by Learmonth, Australia (LRM) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "lrm/adjusted/PT1S/hdzf",
    "title" : "Adjusted second data in HDZF orientation, provided by Learmonth, Australia (LRM) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "lrm/adjusted/PT1S/diff",
    "title" : "Adjusted second data in DIFF orientation, provided by Learmonth, Australia (LRM) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "lrm/quasi-def/PT1S/native",
    "title" : "Quasi-def second data in the coordinate system of measurement of the data ('native'), provided by Learmonth, Australia (LRM) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "lrm/quasi-def/PT1S/xyzf",
    "title" : "Quasi-def second data in XYZF orientation, provided by Learmonth, Australia (LRM) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "lrm/quasi-def/PT1S/hdzf",
    "title" : "Quasi-def second data in HDZF orientation, provided by Learmonth, Australia (LRM) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "lrm/quasi-def/PT1S/diff",
    "title" : "Quasi-def second data in DIFF orientation, provided by Learmonth, Australia (LRM) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "lrm/reported/PT1S/native",
    "title" : "Reported second data in the coordinate system of measurement of the data ('native'), provided by Learmonth, Australia (LRM) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "lrm/best-avail/PT1S/native",
    "title" : "Best-avail second data in the coordinate system of measurement of the data ('native'), provided by Learmonth, Australia (LRM) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "lrm/best-avail/PT1S/xyzf",
    "title" : "Best-avail second data in XYZF orientation, provided by Learmonth, Australia (LRM) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "lrm/best-avail/PT1S/hdzf",
    "title" : "Best-avail second data in HDZF orientation, provided by Learmonth, Australia (LRM) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "lrm/best-avail/PT1S/diff",
    "title" : "Best-avail second data in DIFF orientation, provided by Learmonth, Australia (LRM) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "lvv/definitive/PT1M/native",
    "title" : "Definitive minute data in the coordinate system of measurement of the data ('native'), provided by Lviv, Ukraine (LVV) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "lvv/definitive/PT1M/xyzf",
    "title" : "Definitive minute data in XYZF orientation, provided by Lviv, Ukraine (LVV) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "lvv/definitive/PT1M/hdzf",
    "title" : "Definitive minute data in HDZF orientation, provided by Lviv, Ukraine (LVV) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "lvv/definitive/PT1M/diff",
    "title" : "Definitive minute data in DIFF orientation, provided by Lviv, Ukraine (LVV) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "lvv/reported/PT1M/native",
    "title" : "Reported minute data in the coordinate system of measurement of the data ('native'), provided by Lviv, Ukraine (LVV) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "lvv/best-avail/PT1M/native",
    "title" : "Best-avail minute data in the coordinate system of measurement of the data ('native'), provided by Lviv, Ukraine (LVV) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "lvv/best-avail/PT1M/xyzf",
    "title" : "Best-avail minute data in XYZF orientation, provided by Lviv, Ukraine (LVV) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "lvv/best-avail/PT1M/hdzf",
    "title" : "Best-avail minute data in HDZF orientation, provided by Lviv, Ukraine (LVV) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "lvv/best-avail/PT1M/diff",
    "title" : "Best-avail minute data in DIFF orientation, provided by Lviv, Ukraine (LVV) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "lyc/adjusted/PT1M/native",
    "title" : "Adjusted minute data in the coordinate system of measurement of the data ('native'), provided by Lycksele, Sweden (LYC) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "lyc/adjusted/PT1M/xyzf",
    "title" : "Adjusted minute data in XYZF orientation, provided by Lycksele, Sweden (LYC) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "lyc/adjusted/PT1M/hdzf",
    "title" : "Adjusted minute data in HDZF orientation, provided by Lycksele, Sweden (LYC) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "lyc/adjusted/PT1M/diff",
    "title" : "Adjusted minute data in DIFF orientation, provided by Lycksele, Sweden (LYC) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "lyc/definitive/PT1M/native",
    "title" : "Definitive minute data in the coordinate system of measurement of the data ('native'), provided by Lycksele, Sweden (LYC) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "lyc/definitive/PT1M/xyzf",
    "title" : "Definitive minute data in XYZF orientation, provided by Lycksele, Sweden (LYC) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "lyc/definitive/PT1M/hdzf",
    "title" : "Definitive minute data in HDZF orientation, provided by Lycksele, Sweden (LYC) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "lyc/definitive/PT1M/diff",
    "title" : "Definitive minute data in DIFF orientation, provided by Lycksele, Sweden (LYC) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "lyc/quasi-def/PT1M/native",
    "title" : "Quasi-def minute data in the coordinate system of measurement of the data ('native'), provided by Lycksele, Sweden (LYC) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "lyc/quasi-def/PT1M/xyzf",
    "title" : "Quasi-def minute data in XYZF orientation, provided by Lycksele, Sweden (LYC) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "lyc/quasi-def/PT1M/hdzf",
    "title" : "Quasi-def minute data in HDZF orientation, provided by Lycksele, Sweden (LYC) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "lyc/quasi-def/PT1M/diff",
    "title" : "Quasi-def minute data in DIFF orientation, provided by Lycksele, Sweden (LYC) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "lyc/reported/PT1M/native",
    "title" : "Reported minute data in the coordinate system of measurement of the data ('native'), provided by Lycksele, Sweden (LYC) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "lyc/best-avail/PT1M/native",
    "title" : "Best-avail minute data in the coordinate system of measurement of the data ('native'), provided by Lycksele, Sweden (LYC) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "lyc/best-avail/PT1M/xyzf",
    "title" : "Best-avail minute data in XYZF orientation, provided by Lycksele, Sweden (LYC) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "lyc/best-avail/PT1M/hdzf",
    "title" : "Best-avail minute data in HDZF orientation, provided by Lycksele, Sweden (LYC) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "lyc/best-avail/PT1M/diff",
    "title" : "Best-avail minute data in DIFF orientation, provided by Lycksele, Sweden (LYC) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "lyc/adjusted/PT1S/native",
    "title" : "Adjusted second data in the coordinate system of measurement of the data ('native'), provided by Lycksele, Sweden (LYC) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "lyc/adjusted/PT1S/xyzf",
    "title" : "Adjusted second data in XYZF orientation, provided by Lycksele, Sweden (LYC) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "lyc/adjusted/PT1S/hdzf",
    "title" : "Adjusted second data in HDZF orientation, provided by Lycksele, Sweden (LYC) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "lyc/adjusted/PT1S/diff",
    "title" : "Adjusted second data in DIFF orientation, provided by Lycksele, Sweden (LYC) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "lyc/quasi-def/PT1S/native",
    "title" : "Quasi-def second data in the coordinate system of measurement of the data ('native'), provided by Lycksele, Sweden (LYC) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "lyc/quasi-def/PT1S/xyzf",
    "title" : "Quasi-def second data in XYZF orientation, provided by Lycksele, Sweden (LYC) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "lyc/quasi-def/PT1S/hdzf",
    "title" : "Quasi-def second data in HDZF orientation, provided by Lycksele, Sweden (LYC) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "lyc/quasi-def/PT1S/diff",
    "title" : "Quasi-def second data in DIFF orientation, provided by Lycksele, Sweden (LYC) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "lyc/reported/PT1S/native",
    "title" : "Reported second data in the coordinate system of measurement of the data ('native'), provided by Lycksele, Sweden (LYC) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "lyc/best-avail/PT1S/native",
    "title" : "Best-avail second data in the coordinate system of measurement of the data ('native'), provided by Lycksele, Sweden (LYC) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "lyc/best-avail/PT1S/xyzf",
    "title" : "Best-avail second data in XYZF orientation, provided by Lycksele, Sweden (LYC) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "lyc/best-avail/PT1S/hdzf",
    "title" : "Best-avail second data in HDZF orientation, provided by Lycksele, Sweden (LYC) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "lyc/best-avail/PT1S/diff",
    "title" : "Best-avail second data in DIFF orientation, provided by Lycksele, Sweden (LYC) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "lzh/definitive/PT1M/native",
    "title" : "Definitive minute data in the coordinate system of measurement of the data ('native'), provided by Lanzhou, China (LZH) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "lzh/definitive/PT1M/xyzf",
    "title" : "Definitive minute data in XYZF orientation, provided by Lanzhou, China (LZH) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "lzh/definitive/PT1M/hdzf",
    "title" : "Definitive minute data in HDZF orientation, provided by Lanzhou, China (LZH) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "lzh/definitive/PT1M/diff",
    "title" : "Definitive minute data in DIFF orientation, provided by Lanzhou, China (LZH) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "lzh/quasi-def/PT1M/native",
    "title" : "Quasi-def minute data in the coordinate system of measurement of the data ('native'), provided by Lanzhou, China (LZH) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "lzh/quasi-def/PT1M/xyzf",
    "title" : "Quasi-def minute data in XYZF orientation, provided by Lanzhou, China (LZH) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "lzh/quasi-def/PT1M/hdzf",
    "title" : "Quasi-def minute data in HDZF orientation, provided by Lanzhou, China (LZH) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "lzh/quasi-def/PT1M/diff",
    "title" : "Quasi-def minute data in DIFF orientation, provided by Lanzhou, China (LZH) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "lzh/reported/PT1M/native",
    "title" : "Reported minute data in the coordinate system of measurement of the data ('native'), provided by Lanzhou, China (LZH) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "lzh/best-avail/PT1M/native",
    "title" : "Best-avail minute data in the coordinate system of measurement of the data ('native'), provided by Lanzhou, China (LZH) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "lzh/best-avail/PT1M/xyzf",
    "title" : "Best-avail minute data in XYZF orientation, provided by Lanzhou, China (LZH) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "lzh/best-avail/PT1M/hdzf",
    "title" : "Best-avail minute data in HDZF orientation, provided by Lanzhou, China (LZH) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "lzh/best-avail/PT1M/diff",
    "title" : "Best-avail minute data in DIFF orientation, provided by Lanzhou, China (LZH) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "lzh/quasi-def/PT1S/native",
    "title" : "Quasi-def second data in the coordinate system of measurement of the data ('native'), provided by Lanzhou, China (LZH) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "lzh/quasi-def/PT1S/xyzf",
    "title" : "Quasi-def second data in XYZF orientation, provided by Lanzhou, China (LZH) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "lzh/quasi-def/PT1S/hdzf",
    "title" : "Quasi-def second data in HDZF orientation, provided by Lanzhou, China (LZH) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "lzh/quasi-def/PT1S/diff",
    "title" : "Quasi-def second data in DIFF orientation, provided by Lanzhou, China (LZH) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "lzh/reported/PT1S/native",
    "title" : "Reported second data in the coordinate system of measurement of the data ('native'), provided by Lanzhou, China (LZH) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "lzh/best-avail/PT1S/native",
    "title" : "Best-avail second data in the coordinate system of measurement of the data ('native'), provided by Lanzhou, China (LZH) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "lzh/best-avail/PT1S/xyzf",
    "title" : "Best-avail second data in XYZF orientation, provided by Lanzhou, China (LZH) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "lzh/best-avail/PT1S/hdzf",
    "title" : "Best-avail second data in HDZF orientation, provided by Lanzhou, China (LZH) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "lzh/best-avail/PT1S/diff",
    "title" : "Best-avail second data in DIFF orientation, provided by Lanzhou, China (LZH) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "mab/adjusted/PT1M/native",
    "title" : "Adjusted minute data in the coordinate system of measurement of the data ('native'), provided by Manhay, Belgium (MAB) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "mab/adjusted/PT1M/xyzf",
    "title" : "Adjusted minute data in XYZF orientation, provided by Manhay, Belgium (MAB) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "mab/adjusted/PT1M/hdzf",
    "title" : "Adjusted minute data in HDZF orientation, provided by Manhay, Belgium (MAB) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "mab/adjusted/PT1M/diff",
    "title" : "Adjusted minute data in DIFF orientation, provided by Manhay, Belgium (MAB) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "mab/definitive/PT1M/native",
    "title" : "Definitive minute data in the coordinate system of measurement of the data ('native'), provided by Manhay, Belgium (MAB) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "mab/definitive/PT1M/xyzf",
    "title" : "Definitive minute data in XYZF orientation, provided by Manhay, Belgium (MAB) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "mab/definitive/PT1M/hdzf",
    "title" : "Definitive minute data in HDZF orientation, provided by Manhay, Belgium (MAB) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "mab/definitive/PT1M/diff",
    "title" : "Definitive minute data in DIFF orientation, provided by Manhay, Belgium (MAB) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "mab/quasi-def/PT1M/native",
    "title" : "Quasi-def minute data in the coordinate system of measurement of the data ('native'), provided by Manhay, Belgium (MAB) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "mab/quasi-def/PT1M/xyzf",
    "title" : "Quasi-def minute data in XYZF orientation, provided by Manhay, Belgium (MAB) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "mab/quasi-def/PT1M/hdzf",
    "title" : "Quasi-def minute data in HDZF orientation, provided by Manhay, Belgium (MAB) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "mab/quasi-def/PT1M/diff",
    "title" : "Quasi-def minute data in DIFF orientation, provided by Manhay, Belgium (MAB) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "mab/reported/PT1M/native",
    "title" : "Reported minute data in the coordinate system of measurement of the data ('native'), provided by Manhay, Belgium (MAB) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "mab/best-avail/PT1M/native",
    "title" : "Best-avail minute data in the coordinate system of measurement of the data ('native'), provided by Manhay, Belgium (MAB) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "mab/best-avail/PT1M/xyzf",
    "title" : "Best-avail minute data in XYZF orientation, provided by Manhay, Belgium (MAB) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "mab/best-avail/PT1M/hdzf",
    "title" : "Best-avail minute data in HDZF orientation, provided by Manhay, Belgium (MAB) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "mab/best-avail/PT1M/diff",
    "title" : "Best-avail minute data in DIFF orientation, provided by Manhay, Belgium (MAB) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "maw/adjusted/PT1M/native",
    "title" : "Adjusted minute data in the coordinate system of measurement of the data ('native'), provided by Mawson, Antarctica (MAW) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "maw/adjusted/PT1M/xyzf",
    "title" : "Adjusted minute data in XYZF orientation, provided by Mawson, Antarctica (MAW) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "maw/adjusted/PT1M/hdzf",
    "title" : "Adjusted minute data in HDZF orientation, provided by Mawson, Antarctica (MAW) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "maw/adjusted/PT1M/diff",
    "title" : "Adjusted minute data in DIFF orientation, provided by Mawson, Antarctica (MAW) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "maw/definitive/PT1M/native",
    "title" : "Definitive minute data in the coordinate system of measurement of the data ('native'), provided by Mawson, Antarctica (MAW) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "maw/definitive/PT1M/xyzf",
    "title" : "Definitive minute data in XYZF orientation, provided by Mawson, Antarctica (MAW) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "maw/definitive/PT1M/hdzf",
    "title" : "Definitive minute data in HDZF orientation, provided by Mawson, Antarctica (MAW) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "maw/definitive/PT1M/diff",
    "title" : "Definitive minute data in DIFF orientation, provided by Mawson, Antarctica (MAW) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "maw/quasi-def/PT1M/native",
    "title" : "Quasi-def minute data in the coordinate system of measurement of the data ('native'), provided by Mawson, Antarctica (MAW) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "maw/quasi-def/PT1M/xyzf",
    "title" : "Quasi-def minute data in XYZF orientation, provided by Mawson, Antarctica (MAW) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "maw/quasi-def/PT1M/hdzf",
    "title" : "Quasi-def minute data in HDZF orientation, provided by Mawson, Antarctica (MAW) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "maw/quasi-def/PT1M/diff",
    "title" : "Quasi-def minute data in DIFF orientation, provided by Mawson, Antarctica (MAW) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "maw/reported/PT1M/native",
    "title" : "Reported minute data in the coordinate system of measurement of the data ('native'), provided by Mawson, Antarctica (MAW) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "maw/best-avail/PT1M/native",
    "title" : "Best-avail minute data in the coordinate system of measurement of the data ('native'), provided by Mawson, Antarctica (MAW) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "maw/best-avail/PT1M/xyzf",
    "title" : "Best-avail minute data in XYZF orientation, provided by Mawson, Antarctica (MAW) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "maw/best-avail/PT1M/hdzf",
    "title" : "Best-avail minute data in HDZF orientation, provided by Mawson, Antarctica (MAW) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "maw/best-avail/PT1M/diff",
    "title" : "Best-avail minute data in DIFF orientation, provided by Mawson, Antarctica (MAW) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "maw/adjusted/PT1S/native",
    "title" : "Adjusted second data in the coordinate system of measurement of the data ('native'), provided by Mawson, Antarctica (MAW) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "maw/adjusted/PT1S/xyzf",
    "title" : "Adjusted second data in XYZF orientation, provided by Mawson, Antarctica (MAW) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "maw/adjusted/PT1S/hdzf",
    "title" : "Adjusted second data in HDZF orientation, provided by Mawson, Antarctica (MAW) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "maw/adjusted/PT1S/diff",
    "title" : "Adjusted second data in DIFF orientation, provided by Mawson, Antarctica (MAW) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "maw/quasi-def/PT1S/native",
    "title" : "Quasi-def second data in the coordinate system of measurement of the data ('native'), provided by Mawson, Antarctica (MAW) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "maw/quasi-def/PT1S/xyzf",
    "title" : "Quasi-def second data in XYZF orientation, provided by Mawson, Antarctica (MAW) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "maw/quasi-def/PT1S/hdzf",
    "title" : "Quasi-def second data in HDZF orientation, provided by Mawson, Antarctica (MAW) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "maw/quasi-def/PT1S/diff",
    "title" : "Quasi-def second data in DIFF orientation, provided by Mawson, Antarctica (MAW) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "maw/reported/PT1S/native",
    "title" : "Reported second data in the coordinate system of measurement of the data ('native'), provided by Mawson, Antarctica (MAW) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "maw/best-avail/PT1S/native",
    "title" : "Best-avail second data in the coordinate system of measurement of the data ('native'), provided by Mawson, Antarctica (MAW) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "maw/best-avail/PT1S/xyzf",
    "title" : "Best-avail second data in XYZF orientation, provided by Mawson, Antarctica (MAW) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "maw/best-avail/PT1S/hdzf",
    "title" : "Best-avail second data in HDZF orientation, provided by Mawson, Antarctica (MAW) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "maw/best-avail/PT1S/diff",
    "title" : "Best-avail second data in DIFF orientation, provided by Mawson, Antarctica (MAW) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "mbc/definitive/PT1M/native",
    "title" : "Definitive minute data in the coordinate system of measurement of the data ('native'), provided by Mould Bay, Canada (MBC) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "mbc/definitive/PT1M/xyzf",
    "title" : "Definitive minute data in XYZF orientation, provided by Mould Bay, Canada (MBC) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "mbc/definitive/PT1M/hdzf",
    "title" : "Definitive minute data in HDZF orientation, provided by Mould Bay, Canada (MBC) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "mbc/definitive/PT1M/diff",
    "title" : "Definitive minute data in DIFF orientation, provided by Mould Bay, Canada (MBC) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "mbc/reported/PT1M/native",
    "title" : "Reported minute data in the coordinate system of measurement of the data ('native'), provided by Mould Bay, Canada (MBC) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "mbc/best-avail/PT1M/native",
    "title" : "Best-avail minute data in the coordinate system of measurement of the data ('native'), provided by Mould Bay, Canada (MBC) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "mbc/best-avail/PT1M/xyzf",
    "title" : "Best-avail minute data in XYZF orientation, provided by Mould Bay, Canada (MBC) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "mbc/best-avail/PT1M/hdzf",
    "title" : "Best-avail minute data in HDZF orientation, provided by Mould Bay, Canada (MBC) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "mbc/best-avail/PT1M/diff",
    "title" : "Best-avail minute data in DIFF orientation, provided by Mould Bay, Canada (MBC) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "mbo/definitive/PT1M/native",
    "title" : "Definitive minute data in the coordinate system of measurement of the data ('native'), provided by Mbour, Senegal (MBO) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "mbo/definitive/PT1M/xyzf",
    "title" : "Definitive minute data in XYZF orientation, provided by Mbour, Senegal (MBO) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "mbo/definitive/PT1M/hdzf",
    "title" : "Definitive minute data in HDZF orientation, provided by Mbour, Senegal (MBO) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "mbo/definitive/PT1M/diff",
    "title" : "Definitive minute data in DIFF orientation, provided by Mbour, Senegal (MBO) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "mbo/quasi-def/PT1M/native",
    "title" : "Quasi-def minute data in the coordinate system of measurement of the data ('native'), provided by Mbour, Senegal (MBO) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "mbo/quasi-def/PT1M/xyzf",
    "title" : "Quasi-def minute data in XYZF orientation, provided by Mbour, Senegal (MBO) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "mbo/quasi-def/PT1M/hdzf",
    "title" : "Quasi-def minute data in HDZF orientation, provided by Mbour, Senegal (MBO) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "mbo/quasi-def/PT1M/diff",
    "title" : "Quasi-def minute data in DIFF orientation, provided by Mbour, Senegal (MBO) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "mbo/reported/PT1M/native",
    "title" : "Reported minute data in the coordinate system of measurement of the data ('native'), provided by Mbour, Senegal (MBO) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "mbo/best-avail/PT1M/native",
    "title" : "Best-avail minute data in the coordinate system of measurement of the data ('native'), provided by Mbour, Senegal (MBO) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "mbo/best-avail/PT1M/xyzf",
    "title" : "Best-avail minute data in XYZF orientation, provided by Mbour, Senegal (MBO) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "mbo/best-avail/PT1M/hdzf",
    "title" : "Best-avail minute data in HDZF orientation, provided by Mbour, Senegal (MBO) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "mbo/best-avail/PT1M/diff",
    "title" : "Best-avail minute data in DIFF orientation, provided by Mbour, Senegal (MBO) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "mbo/quasi-def/PT1S/native",
    "title" : "Quasi-def second data in the coordinate system of measurement of the data ('native'), provided by Mbour, Senegal (MBO) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "mbo/quasi-def/PT1S/xyzf",
    "title" : "Quasi-def second data in XYZF orientation, provided by Mbour, Senegal (MBO) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "mbo/quasi-def/PT1S/hdzf",
    "title" : "Quasi-def second data in HDZF orientation, provided by Mbour, Senegal (MBO) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "mbo/quasi-def/PT1S/diff",
    "title" : "Quasi-def second data in DIFF orientation, provided by Mbour, Senegal (MBO) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "mbo/reported/PT1S/native",
    "title" : "Reported second data in the coordinate system of measurement of the data ('native'), provided by Mbour, Senegal (MBO) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "mbo/best-avail/PT1S/native",
    "title" : "Best-avail second data in the coordinate system of measurement of the data ('native'), provided by Mbour, Senegal (MBO) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "mbo/best-avail/PT1S/xyzf",
    "title" : "Best-avail second data in XYZF orientation, provided by Mbour, Senegal (MBO) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "mbo/best-avail/PT1S/hdzf",
    "title" : "Best-avail second data in HDZF orientation, provided by Mbour, Senegal (MBO) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "mbo/best-avail/PT1S/diff",
    "title" : "Best-avail second data in DIFF orientation, provided by Mbour, Senegal (MBO) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "mcq/adjusted/PT1M/native",
    "title" : "Adjusted minute data in the coordinate system of measurement of the data ('native'), provided by Macquarie Island, Australia (MCQ) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "mcq/adjusted/PT1M/xyzf",
    "title" : "Adjusted minute data in XYZF orientation, provided by Macquarie Island, Australia (MCQ) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "mcq/adjusted/PT1M/hdzf",
    "title" : "Adjusted minute data in HDZF orientation, provided by Macquarie Island, Australia (MCQ) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "mcq/adjusted/PT1M/diff",
    "title" : "Adjusted minute data in DIFF orientation, provided by Macquarie Island, Australia (MCQ) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "mcq/definitive/PT1M/native",
    "title" : "Definitive minute data in the coordinate system of measurement of the data ('native'), provided by Macquarie Island, Australia (MCQ) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "mcq/definitive/PT1M/xyzf",
    "title" : "Definitive minute data in XYZF orientation, provided by Macquarie Island, Australia (MCQ) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "mcq/definitive/PT1M/hdzf",
    "title" : "Definitive minute data in HDZF orientation, provided by Macquarie Island, Australia (MCQ) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "mcq/definitive/PT1M/diff",
    "title" : "Definitive minute data in DIFF orientation, provided by Macquarie Island, Australia (MCQ) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "mcq/quasi-def/PT1M/native",
    "title" : "Quasi-def minute data in the coordinate system of measurement of the data ('native'), provided by Macquarie Island, Australia (MCQ) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "mcq/quasi-def/PT1M/xyzf",
    "title" : "Quasi-def minute data in XYZF orientation, provided by Macquarie Island, Australia (MCQ) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "mcq/quasi-def/PT1M/hdzf",
    "title" : "Quasi-def minute data in HDZF orientation, provided by Macquarie Island, Australia (MCQ) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "mcq/quasi-def/PT1M/diff",
    "title" : "Quasi-def minute data in DIFF orientation, provided by Macquarie Island, Australia (MCQ) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "mcq/reported/PT1M/native",
    "title" : "Reported minute data in the coordinate system of measurement of the data ('native'), provided by Macquarie Island, Australia (MCQ) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "mcq/best-avail/PT1M/native",
    "title" : "Best-avail minute data in the coordinate system of measurement of the data ('native'), provided by Macquarie Island, Australia (MCQ) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "mcq/best-avail/PT1M/xyzf",
    "title" : "Best-avail minute data in XYZF orientation, provided by Macquarie Island, Australia (MCQ) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "mcq/best-avail/PT1M/hdzf",
    "title" : "Best-avail minute data in HDZF orientation, provided by Macquarie Island, Australia (MCQ) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "mcq/best-avail/PT1M/diff",
    "title" : "Best-avail minute data in DIFF orientation, provided by Macquarie Island, Australia (MCQ) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "mcq/adjusted/PT1S/native",
    "title" : "Adjusted second data in the coordinate system of measurement of the data ('native'), provided by Macquarie Island, Australia (MCQ) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "mcq/adjusted/PT1S/xyzf",
    "title" : "Adjusted second data in XYZF orientation, provided by Macquarie Island, Australia (MCQ) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "mcq/adjusted/PT1S/hdzf",
    "title" : "Adjusted second data in HDZF orientation, provided by Macquarie Island, Australia (MCQ) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "mcq/adjusted/PT1S/diff",
    "title" : "Adjusted second data in DIFF orientation, provided by Macquarie Island, Australia (MCQ) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "mcq/quasi-def/PT1S/native",
    "title" : "Quasi-def second data in the coordinate system of measurement of the data ('native'), provided by Macquarie Island, Australia (MCQ) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "mcq/quasi-def/PT1S/xyzf",
    "title" : "Quasi-def second data in XYZF orientation, provided by Macquarie Island, Australia (MCQ) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "mcq/quasi-def/PT1S/hdzf",
    "title" : "Quasi-def second data in HDZF orientation, provided by Macquarie Island, Australia (MCQ) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "mcq/quasi-def/PT1S/diff",
    "title" : "Quasi-def second data in DIFF orientation, provided by Macquarie Island, Australia (MCQ) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "mcq/reported/PT1S/native",
    "title" : "Reported second data in the coordinate system of measurement of the data ('native'), provided by Macquarie Island, Australia (MCQ) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "mcq/best-avail/PT1S/native",
    "title" : "Best-avail second data in the coordinate system of measurement of the data ('native'), provided by Macquarie Island, Australia (MCQ) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "mcq/best-avail/PT1S/xyzf",
    "title" : "Best-avail second data in XYZF orientation, provided by Macquarie Island, Australia (MCQ) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "mcq/best-avail/PT1S/hdzf",
    "title" : "Best-avail second data in HDZF orientation, provided by Macquarie Island, Australia (MCQ) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "mcq/best-avail/PT1S/diff",
    "title" : "Best-avail second data in DIFF orientation, provided by Macquarie Island, Australia (MCQ) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "mea/definitive/PT1M/native",
    "title" : "Definitive minute data in the coordinate system of measurement of the data ('native'), provided by Meanook, Canada (MEA) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "mea/definitive/PT1M/xyzf",
    "title" : "Definitive minute data in XYZF orientation, provided by Meanook, Canada (MEA) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "mea/definitive/PT1M/hdzf",
    "title" : "Definitive minute data in HDZF orientation, provided by Meanook, Canada (MEA) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "mea/definitive/PT1M/diff",
    "title" : "Definitive minute data in DIFF orientation, provided by Meanook, Canada (MEA) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "mea/reported/PT1M/native",
    "title" : "Reported minute data in the coordinate system of measurement of the data ('native'), provided by Meanook, Canada (MEA) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "mea/best-avail/PT1M/native",
    "title" : "Best-avail minute data in the coordinate system of measurement of the data ('native'), provided by Meanook, Canada (MEA) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "mea/best-avail/PT1M/xyzf",
    "title" : "Best-avail minute data in XYZF orientation, provided by Meanook, Canada (MEA) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "mea/best-avail/PT1M/hdzf",
    "title" : "Best-avail minute data in HDZF orientation, provided by Meanook, Canada (MEA) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "mea/best-avail/PT1M/diff",
    "title" : "Best-avail minute data in DIFF orientation, provided by Meanook, Canada (MEA) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "mea/reported/PT1S/native",
    "title" : "Reported second data in the coordinate system of measurement of the data ('native'), provided by Meanook, Canada (MEA) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "mea/best-avail/PT1S/native",
    "title" : "Best-avail second data in the coordinate system of measurement of the data ('native'), provided by Meanook, Canada (MEA) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "mea/best-avail/PT1S/xyzf",
    "title" : "Best-avail second data in XYZF orientation, provided by Meanook, Canada (MEA) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "mea/best-avail/PT1S/hdzf",
    "title" : "Best-avail second data in HDZF orientation, provided by Meanook, Canada (MEA) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "mea/best-avail/PT1S/diff",
    "title" : "Best-avail second data in DIFF orientation, provided by Meanook, Canada (MEA) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "mgd/adjusted/PT1M/native",
    "title" : "Adjusted minute data in the coordinate system of measurement of the data ('native'), provided by Magadan, Russia (MGD) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "mgd/adjusted/PT1M/xyzf",
    "title" : "Adjusted minute data in XYZF orientation, provided by Magadan, Russia (MGD) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "mgd/adjusted/PT1M/hdzf",
    "title" : "Adjusted minute data in HDZF orientation, provided by Magadan, Russia (MGD) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "mgd/adjusted/PT1M/diff",
    "title" : "Adjusted minute data in DIFF orientation, provided by Magadan, Russia (MGD) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "mgd/definitive/PT1M/native",
    "title" : "Definitive minute data in the coordinate system of measurement of the data ('native'), provided by Magadan, Russia (MGD) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "mgd/definitive/PT1M/xyzf",
    "title" : "Definitive minute data in XYZF orientation, provided by Magadan, Russia (MGD) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "mgd/definitive/PT1M/hdzf",
    "title" : "Definitive minute data in HDZF orientation, provided by Magadan, Russia (MGD) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "mgd/definitive/PT1M/diff",
    "title" : "Definitive minute data in DIFF orientation, provided by Magadan, Russia (MGD) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "mgd/quasi-def/PT1M/native",
    "title" : "Quasi-def minute data in the coordinate system of measurement of the data ('native'), provided by Magadan, Russia (MGD) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "mgd/quasi-def/PT1M/xyzf",
    "title" : "Quasi-def minute data in XYZF orientation, provided by Magadan, Russia (MGD) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "mgd/quasi-def/PT1M/hdzf",
    "title" : "Quasi-def minute data in HDZF orientation, provided by Magadan, Russia (MGD) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "mgd/quasi-def/PT1M/diff",
    "title" : "Quasi-def minute data in DIFF orientation, provided by Magadan, Russia (MGD) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "mgd/reported/PT1M/native",
    "title" : "Reported minute data in the coordinate system of measurement of the data ('native'), provided by Magadan, Russia (MGD) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "mgd/best-avail/PT1M/native",
    "title" : "Best-avail minute data in the coordinate system of measurement of the data ('native'), provided by Magadan, Russia (MGD) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "mgd/best-avail/PT1M/xyzf",
    "title" : "Best-avail minute data in XYZF orientation, provided by Magadan, Russia (MGD) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "mgd/best-avail/PT1M/hdzf",
    "title" : "Best-avail minute data in HDZF orientation, provided by Magadan, Russia (MGD) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "mgd/best-avail/PT1M/diff",
    "title" : "Best-avail minute data in DIFF orientation, provided by Magadan, Russia (MGD) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "mid/definitive/PT1M/native",
    "title" : "Definitive minute data in the coordinate system of measurement of the data ('native'), provided by Midway Island, USA (MID) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "mid/definitive/PT1M/xyzf",
    "title" : "Definitive minute data in XYZF orientation, provided by Midway Island, USA (MID) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "mid/definitive/PT1M/hdzf",
    "title" : "Definitive minute data in HDZF orientation, provided by Midway Island, USA (MID) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "mid/definitive/PT1M/diff",
    "title" : "Definitive minute data in DIFF orientation, provided by Midway Island, USA (MID) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "mid/reported/PT1M/native",
    "title" : "Reported minute data in the coordinate system of measurement of the data ('native'), provided by Midway Island, USA (MID) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "mid/best-avail/PT1M/native",
    "title" : "Best-avail minute data in the coordinate system of measurement of the data ('native'), provided by Midway Island, USA (MID) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "mid/best-avail/PT1M/xyzf",
    "title" : "Best-avail minute data in XYZF orientation, provided by Midway Island, USA (MID) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "mid/best-avail/PT1M/hdzf",
    "title" : "Best-avail minute data in HDZF orientation, provided by Midway Island, USA (MID) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "mid/best-avail/PT1M/diff",
    "title" : "Best-avail minute data in DIFF orientation, provided by Midway Island, USA (MID) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "mlt/definitive/PT1M/native",
    "title" : "Definitive minute data in the coordinate system of measurement of the data ('native'), provided by Misallat, Egypt (MLT) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "mlt/definitive/PT1M/xyzf",
    "title" : "Definitive minute data in XYZF orientation, provided by Misallat, Egypt (MLT) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "mlt/definitive/PT1M/hdzf",
    "title" : "Definitive minute data in HDZF orientation, provided by Misallat, Egypt (MLT) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "mlt/definitive/PT1M/diff",
    "title" : "Definitive minute data in DIFF orientation, provided by Misallat, Egypt (MLT) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "mlt/reported/PT1M/native",
    "title" : "Reported minute data in the coordinate system of measurement of the data ('native'), provided by Misallat, Egypt (MLT) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "mlt/best-avail/PT1M/native",
    "title" : "Best-avail minute data in the coordinate system of measurement of the data ('native'), provided by Misallat, Egypt (MLT) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "mlt/best-avail/PT1M/xyzf",
    "title" : "Best-avail minute data in XYZF orientation, provided by Misallat, Egypt (MLT) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "mlt/best-avail/PT1M/hdzf",
    "title" : "Best-avail minute data in HDZF orientation, provided by Misallat, Egypt (MLT) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "mlt/best-avail/PT1M/diff",
    "title" : "Best-avail minute data in DIFF orientation, provided by Misallat, Egypt (MLT) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "mmb/adjusted/PT1M/native",
    "title" : "Adjusted minute data in the coordinate system of measurement of the data ('native'), provided by Memambetsu, Japan (MMB) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "mmb/adjusted/PT1M/xyzf",
    "title" : "Adjusted minute data in XYZF orientation, provided by Memambetsu, Japan (MMB) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "mmb/adjusted/PT1M/hdzf",
    "title" : "Adjusted minute data in HDZF orientation, provided by Memambetsu, Japan (MMB) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "mmb/adjusted/PT1M/diff",
    "title" : "Adjusted minute data in DIFF orientation, provided by Memambetsu, Japan (MMB) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "mmb/definitive/PT1M/native",
    "title" : "Definitive minute data in the coordinate system of measurement of the data ('native'), provided by Memambetsu, Japan (MMB) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "mmb/definitive/PT1M/xyzf",
    "title" : "Definitive minute data in XYZF orientation, provided by Memambetsu, Japan (MMB) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "mmb/definitive/PT1M/hdzf",
    "title" : "Definitive minute data in HDZF orientation, provided by Memambetsu, Japan (MMB) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "mmb/definitive/PT1M/diff",
    "title" : "Definitive minute data in DIFF orientation, provided by Memambetsu, Japan (MMB) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "mmb/quasi-def/PT1M/native",
    "title" : "Quasi-def minute data in the coordinate system of measurement of the data ('native'), provided by Memambetsu, Japan (MMB) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "mmb/quasi-def/PT1M/xyzf",
    "title" : "Quasi-def minute data in XYZF orientation, provided by Memambetsu, Japan (MMB) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "mmb/quasi-def/PT1M/hdzf",
    "title" : "Quasi-def minute data in HDZF orientation, provided by Memambetsu, Japan (MMB) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "mmb/quasi-def/PT1M/diff",
    "title" : "Quasi-def minute data in DIFF orientation, provided by Memambetsu, Japan (MMB) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "mmb/reported/PT1M/native",
    "title" : "Reported minute data in the coordinate system of measurement of the data ('native'), provided by Memambetsu, Japan (MMB) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "mmb/best-avail/PT1M/native",
    "title" : "Best-avail minute data in the coordinate system of measurement of the data ('native'), provided by Memambetsu, Japan (MMB) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "mmb/best-avail/PT1M/xyzf",
    "title" : "Best-avail minute data in XYZF orientation, provided by Memambetsu, Japan (MMB) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "mmb/best-avail/PT1M/hdzf",
    "title" : "Best-avail minute data in HDZF orientation, provided by Memambetsu, Japan (MMB) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "mmb/best-avail/PT1M/diff",
    "title" : "Best-avail minute data in DIFF orientation, provided by Memambetsu, Japan (MMB) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "mmb/adjusted/PT1S/native",
    "title" : "Adjusted second data in the coordinate system of measurement of the data ('native'), provided by Memambetsu, Japan (MMB) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "mmb/adjusted/PT1S/xyzf",
    "title" : "Adjusted second data in XYZF orientation, provided by Memambetsu, Japan (MMB) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "mmb/adjusted/PT1S/hdzf",
    "title" : "Adjusted second data in HDZF orientation, provided by Memambetsu, Japan (MMB) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "mmb/adjusted/PT1S/diff",
    "title" : "Adjusted second data in DIFF orientation, provided by Memambetsu, Japan (MMB) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "mmb/best-avail/PT1S/native",
    "title" : "Best-avail second data in the coordinate system of measurement of the data ('native'), provided by Memambetsu, Japan (MMB) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "mmb/best-avail/PT1S/xyzf",
    "title" : "Best-avail second data in XYZF orientation, provided by Memambetsu, Japan (MMB) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "mmb/best-avail/PT1S/hdzf",
    "title" : "Best-avail second data in HDZF orientation, provided by Memambetsu, Japan (MMB) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "mmb/best-avail/PT1S/diff",
    "title" : "Best-avail second data in DIFF orientation, provided by Memambetsu, Japan (MMB) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "mzl/adjusted/PT1M/native",
    "title" : "Adjusted minute data in the coordinate system of measurement of the data ('native'), provided by Manzhouli, China (MZL) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "mzl/adjusted/PT1M/xyzf",
    "title" : "Adjusted minute data in XYZF orientation, provided by Manzhouli, China (MZL) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "mzl/adjusted/PT1M/hdzf",
    "title" : "Adjusted minute data in HDZF orientation, provided by Manzhouli, China (MZL) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "mzl/adjusted/PT1M/diff",
    "title" : "Adjusted minute data in DIFF orientation, provided by Manzhouli, China (MZL) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "mzl/reported/PT1M/native",
    "title" : "Reported minute data in the coordinate system of measurement of the data ('native'), provided by Manzhouli, China (MZL) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "mzl/best-avail/PT1M/native",
    "title" : "Best-avail minute data in the coordinate system of measurement of the data ('native'), provided by Manzhouli, China (MZL) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "mzl/best-avail/PT1M/xyzf",
    "title" : "Best-avail minute data in XYZF orientation, provided by Manzhouli, China (MZL) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "mzl/best-avail/PT1M/hdzf",
    "title" : "Best-avail minute data in HDZF orientation, provided by Manzhouli, China (MZL) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "mzl/best-avail/PT1M/diff",
    "title" : "Best-avail minute data in DIFF orientation, provided by Manzhouli, China (MZL) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "naq/adjusted/PT1M/native",
    "title" : "Adjusted minute data in the coordinate system of measurement of the data ('native'), provided by Narsarsuaq, Greenland (NAQ) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "naq/adjusted/PT1M/xyzf",
    "title" : "Adjusted minute data in XYZF orientation, provided by Narsarsuaq, Greenland (NAQ) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "naq/adjusted/PT1M/hdzf",
    "title" : "Adjusted minute data in HDZF orientation, provided by Narsarsuaq, Greenland (NAQ) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "naq/adjusted/PT1M/diff",
    "title" : "Adjusted minute data in DIFF orientation, provided by Narsarsuaq, Greenland (NAQ) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "naq/definitive/PT1M/native",
    "title" : "Definitive minute data in the coordinate system of measurement of the data ('native'), provided by Narsarsuaq, Greenland (NAQ) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "naq/definitive/PT1M/xyzf",
    "title" : "Definitive minute data in XYZF orientation, provided by Narsarsuaq, Greenland (NAQ) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "naq/definitive/PT1M/hdzf",
    "title" : "Definitive minute data in HDZF orientation, provided by Narsarsuaq, Greenland (NAQ) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "naq/definitive/PT1M/diff",
    "title" : "Definitive minute data in DIFF orientation, provided by Narsarsuaq, Greenland (NAQ) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "naq/quasi-def/PT1M/native",
    "title" : "Quasi-def minute data in the coordinate system of measurement of the data ('native'), provided by Narsarsuaq, Greenland (NAQ) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "naq/quasi-def/PT1M/xyzf",
    "title" : "Quasi-def minute data in XYZF orientation, provided by Narsarsuaq, Greenland (NAQ) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "naq/quasi-def/PT1M/hdzf",
    "title" : "Quasi-def minute data in HDZF orientation, provided by Narsarsuaq, Greenland (NAQ) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "naq/quasi-def/PT1M/diff",
    "title" : "Quasi-def minute data in DIFF orientation, provided by Narsarsuaq, Greenland (NAQ) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "naq/reported/PT1M/native",
    "title" : "Reported minute data in the coordinate system of measurement of the data ('native'), provided by Narsarsuaq, Greenland (NAQ) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "naq/best-avail/PT1M/native",
    "title" : "Best-avail minute data in the coordinate system of measurement of the data ('native'), provided by Narsarsuaq, Greenland (NAQ) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "naq/best-avail/PT1M/xyzf",
    "title" : "Best-avail minute data in XYZF orientation, provided by Narsarsuaq, Greenland (NAQ) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "naq/best-avail/PT1M/hdzf",
    "title" : "Best-avail minute data in HDZF orientation, provided by Narsarsuaq, Greenland (NAQ) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "naq/best-avail/PT1M/diff",
    "title" : "Best-avail minute data in DIFF orientation, provided by Narsarsuaq, Greenland (NAQ) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "nck/definitive/PT1M/native",
    "title" : "Definitive minute data in the coordinate system of measurement of the data ('native'), provided by Nagycenk, Hungary (NCK) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "nck/definitive/PT1M/xyzf",
    "title" : "Definitive minute data in XYZF orientation, provided by Nagycenk, Hungary (NCK) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "nck/definitive/PT1M/hdzf",
    "title" : "Definitive minute data in HDZF orientation, provided by Nagycenk, Hungary (NCK) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "nck/definitive/PT1M/diff",
    "title" : "Definitive minute data in DIFF orientation, provided by Nagycenk, Hungary (NCK) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "nck/reported/PT1M/native",
    "title" : "Reported minute data in the coordinate system of measurement of the data ('native'), provided by Nagycenk, Hungary (NCK) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "nck/best-avail/PT1M/native",
    "title" : "Best-avail minute data in the coordinate system of measurement of the data ('native'), provided by Nagycenk, Hungary (NCK) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "nck/best-avail/PT1M/xyzf",
    "title" : "Best-avail minute data in XYZF orientation, provided by Nagycenk, Hungary (NCK) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "nck/best-avail/PT1M/hdzf",
    "title" : "Best-avail minute data in HDZF orientation, provided by Nagycenk, Hungary (NCK) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "nck/best-avail/PT1M/diff",
    "title" : "Best-avail minute data in DIFF orientation, provided by Nagycenk, Hungary (NCK) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "nck/reported/PT1S/native",
    "title" : "Reported second data in the coordinate system of measurement of the data ('native'), provided by Nagycenk, Hungary (NCK) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "nck/best-avail/PT1S/native",
    "title" : "Best-avail second data in the coordinate system of measurement of the data ('native'), provided by Nagycenk, Hungary (NCK) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "nck/best-avail/PT1S/xyzf",
    "title" : "Best-avail second data in XYZF orientation, provided by Nagycenk, Hungary (NCK) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "nck/best-avail/PT1S/hdzf",
    "title" : "Best-avail second data in HDZF orientation, provided by Nagycenk, Hungary (NCK) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "nck/best-avail/PT1S/diff",
    "title" : "Best-avail second data in DIFF orientation, provided by Nagycenk, Hungary (NCK) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "new/adjusted/PT1M/native",
    "title" : "Adjusted minute data in the coordinate system of measurement of the data ('native'), provided by Newport, USA (NEW) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "new/adjusted/PT1M/xyzf",
    "title" : "Adjusted minute data in XYZF orientation, provided by Newport, USA (NEW) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "new/adjusted/PT1M/hdzf",
    "title" : "Adjusted minute data in HDZF orientation, provided by Newport, USA (NEW) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "new/adjusted/PT1M/diff",
    "title" : "Adjusted minute data in DIFF orientation, provided by Newport, USA (NEW) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "new/definitive/PT1M/native",
    "title" : "Definitive minute data in the coordinate system of measurement of the data ('native'), provided by Newport, USA (NEW) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "new/definitive/PT1M/xyzf",
    "title" : "Definitive minute data in XYZF orientation, provided by Newport, USA (NEW) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "new/definitive/PT1M/hdzf",
    "title" : "Definitive minute data in HDZF orientation, provided by Newport, USA (NEW) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "new/definitive/PT1M/diff",
    "title" : "Definitive minute data in DIFF orientation, provided by Newport, USA (NEW) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "new/quasi-def/PT1M/native",
    "title" : "Quasi-def minute data in the coordinate system of measurement of the data ('native'), provided by Newport, USA (NEW) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "new/quasi-def/PT1M/xyzf",
    "title" : "Quasi-def minute data in XYZF orientation, provided by Newport, USA (NEW) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "new/quasi-def/PT1M/hdzf",
    "title" : "Quasi-def minute data in HDZF orientation, provided by Newport, USA (NEW) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "new/quasi-def/PT1M/diff",
    "title" : "Quasi-def minute data in DIFF orientation, provided by Newport, USA (NEW) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "new/reported/PT1M/native",
    "title" : "Reported minute data in the coordinate system of measurement of the data ('native'), provided by Newport, USA (NEW) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "new/best-avail/PT1M/native",
    "title" : "Best-avail minute data in the coordinate system of measurement of the data ('native'), provided by Newport, USA (NEW) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "new/best-avail/PT1M/xyzf",
    "title" : "Best-avail minute data in XYZF orientation, provided by Newport, USA (NEW) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "new/best-avail/PT1M/hdzf",
    "title" : "Best-avail minute data in HDZF orientation, provided by Newport, USA (NEW) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "new/best-avail/PT1M/diff",
    "title" : "Best-avail minute data in DIFF orientation, provided by Newport, USA (NEW) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "new/adjusted/PT1S/native",
    "title" : "Adjusted second data in the coordinate system of measurement of the data ('native'), provided by Newport, USA (NEW) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "new/adjusted/PT1S/xyzf",
    "title" : "Adjusted second data in XYZF orientation, provided by Newport, USA (NEW) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "new/adjusted/PT1S/hdzf",
    "title" : "Adjusted second data in HDZF orientation, provided by Newport, USA (NEW) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "new/adjusted/PT1S/diff",
    "title" : "Adjusted second data in DIFF orientation, provided by Newport, USA (NEW) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "new/reported/PT1S/native",
    "title" : "Reported second data in the coordinate system of measurement of the data ('native'), provided by Newport, USA (NEW) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "new/best-avail/PT1S/native",
    "title" : "Best-avail second data in the coordinate system of measurement of the data ('native'), provided by Newport, USA (NEW) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "new/best-avail/PT1S/xyzf",
    "title" : "Best-avail second data in XYZF orientation, provided by Newport, USA (NEW) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "new/best-avail/PT1S/hdzf",
    "title" : "Best-avail second data in HDZF orientation, provided by Newport, USA (NEW) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "new/best-avail/PT1S/diff",
    "title" : "Best-avail second data in DIFF orientation, provided by Newport, USA (NEW) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "ngk/adjusted/PT1M/native",
    "title" : "Adjusted minute data in the coordinate system of measurement of the data ('native'), provided by Niemegk, Germany (NGK) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "ngk/adjusted/PT1M/xyzf",
    "title" : "Adjusted minute data in XYZF orientation, provided by Niemegk, Germany (NGK) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "ngk/adjusted/PT1M/hdzf",
    "title" : "Adjusted minute data in HDZF orientation, provided by Niemegk, Germany (NGK) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "ngk/adjusted/PT1M/diff",
    "title" : "Adjusted minute data in DIFF orientation, provided by Niemegk, Germany (NGK) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "ngk/definitive/PT1M/native",
    "title" : "Definitive minute data in the coordinate system of measurement of the data ('native'), provided by Niemegk, Germany (NGK) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "ngk/definitive/PT1M/xyzf",
    "title" : "Definitive minute data in XYZF orientation, provided by Niemegk, Germany (NGK) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "ngk/definitive/PT1M/hdzf",
    "title" : "Definitive minute data in HDZF orientation, provided by Niemegk, Germany (NGK) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "ngk/definitive/PT1M/diff",
    "title" : "Definitive minute data in DIFF orientation, provided by Niemegk, Germany (NGK) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "ngk/quasi-def/PT1M/native",
    "title" : "Quasi-def minute data in the coordinate system of measurement of the data ('native'), provided by Niemegk, Germany (NGK) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "ngk/quasi-def/PT1M/xyzf",
    "title" : "Quasi-def minute data in XYZF orientation, provided by Niemegk, Germany (NGK) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "ngk/quasi-def/PT1M/hdzf",
    "title" : "Quasi-def minute data in HDZF orientation, provided by Niemegk, Germany (NGK) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "ngk/quasi-def/PT1M/diff",
    "title" : "Quasi-def minute data in DIFF orientation, provided by Niemegk, Germany (NGK) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "ngk/reported/PT1M/native",
    "title" : "Reported minute data in the coordinate system of measurement of the data ('native'), provided by Niemegk, Germany (NGK) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "ngk/best-avail/PT1M/native",
    "title" : "Best-avail minute data in the coordinate system of measurement of the data ('native'), provided by Niemegk, Germany (NGK) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "ngk/best-avail/PT1M/xyzf",
    "title" : "Best-avail minute data in XYZF orientation, provided by Niemegk, Germany (NGK) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "ngk/best-avail/PT1M/hdzf",
    "title" : "Best-avail minute data in HDZF orientation, provided by Niemegk, Germany (NGK) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "ngk/best-avail/PT1M/diff",
    "title" : "Best-avail minute data in DIFF orientation, provided by Niemegk, Germany (NGK) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "ngk/adjusted/PT1S/native",
    "title" : "Adjusted second data in the coordinate system of measurement of the data ('native'), provided by Niemegk, Germany (NGK) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "ngk/adjusted/PT1S/xyzf",
    "title" : "Adjusted second data in XYZF orientation, provided by Niemegk, Germany (NGK) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "ngk/adjusted/PT1S/hdzf",
    "title" : "Adjusted second data in HDZF orientation, provided by Niemegk, Germany (NGK) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "ngk/adjusted/PT1S/diff",
    "title" : "Adjusted second data in DIFF orientation, provided by Niemegk, Germany (NGK) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "ngk/quasi-def/PT1S/native",
    "title" : "Quasi-def second data in the coordinate system of measurement of the data ('native'), provided by Niemegk, Germany (NGK) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "ngk/quasi-def/PT1S/xyzf",
    "title" : "Quasi-def second data in XYZF orientation, provided by Niemegk, Germany (NGK) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "ngk/quasi-def/PT1S/hdzf",
    "title" : "Quasi-def second data in HDZF orientation, provided by Niemegk, Germany (NGK) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "ngk/quasi-def/PT1S/diff",
    "title" : "Quasi-def second data in DIFF orientation, provided by Niemegk, Germany (NGK) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "ngk/best-avail/PT1S/native",
    "title" : "Best-avail second data in the coordinate system of measurement of the data ('native'), provided by Niemegk, Germany (NGK) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "ngk/best-avail/PT1S/xyzf",
    "title" : "Best-avail second data in XYZF orientation, provided by Niemegk, Germany (NGK) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "ngk/best-avail/PT1S/hdzf",
    "title" : "Best-avail second data in HDZF orientation, provided by Niemegk, Germany (NGK) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "ngk/best-avail/PT1S/diff",
    "title" : "Best-avail second data in DIFF orientation, provided by Niemegk, Germany (NGK) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "nur/adjusted/PT1M/native",
    "title" : "Adjusted minute data in the coordinate system of measurement of the data ('native'), provided by Nurmijarvi, Finland (NUR) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "nur/adjusted/PT1M/xyzf",
    "title" : "Adjusted minute data in XYZF orientation, provided by Nurmijarvi, Finland (NUR) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "nur/adjusted/PT1M/hdzf",
    "title" : "Adjusted minute data in HDZF orientation, provided by Nurmijarvi, Finland (NUR) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "nur/adjusted/PT1M/diff",
    "title" : "Adjusted minute data in DIFF orientation, provided by Nurmijarvi, Finland (NUR) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "nur/definitive/PT1M/native",
    "title" : "Definitive minute data in the coordinate system of measurement of the data ('native'), provided by Nurmijarvi, Finland (NUR) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "nur/definitive/PT1M/xyzf",
    "title" : "Definitive minute data in XYZF orientation, provided by Nurmijarvi, Finland (NUR) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "nur/definitive/PT1M/hdzf",
    "title" : "Definitive minute data in HDZF orientation, provided by Nurmijarvi, Finland (NUR) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "nur/definitive/PT1M/diff",
    "title" : "Definitive minute data in DIFF orientation, provided by Nurmijarvi, Finland (NUR) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "nur/reported/PT1M/native",
    "title" : "Reported minute data in the coordinate system of measurement of the data ('native'), provided by Nurmijarvi, Finland (NUR) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "nur/best-avail/PT1M/native",
    "title" : "Best-avail minute data in the coordinate system of measurement of the data ('native'), provided by Nurmijarvi, Finland (NUR) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "nur/best-avail/PT1M/xyzf",
    "title" : "Best-avail minute data in XYZF orientation, provided by Nurmijarvi, Finland (NUR) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "nur/best-avail/PT1M/hdzf",
    "title" : "Best-avail minute data in HDZF orientation, provided by Nurmijarvi, Finland (NUR) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "nur/best-avail/PT1M/diff",
    "title" : "Best-avail minute data in DIFF orientation, provided by Nurmijarvi, Finland (NUR) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "nur/adjusted/PT1S/native",
    "title" : "Adjusted second data in the coordinate system of measurement of the data ('native'), provided by Nurmijarvi, Finland (NUR) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "nur/adjusted/PT1S/xyzf",
    "title" : "Adjusted second data in XYZF orientation, provided by Nurmijarvi, Finland (NUR) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "nur/adjusted/PT1S/hdzf",
    "title" : "Adjusted second data in HDZF orientation, provided by Nurmijarvi, Finland (NUR) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "nur/adjusted/PT1S/diff",
    "title" : "Adjusted second data in DIFF orientation, provided by Nurmijarvi, Finland (NUR) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "nur/reported/PT1S/native",
    "title" : "Reported second data in the coordinate system of measurement of the data ('native'), provided by Nurmijarvi, Finland (NUR) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "nur/best-avail/PT1S/native",
    "title" : "Best-avail second data in the coordinate system of measurement of the data ('native'), provided by Nurmijarvi, Finland (NUR) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "nur/best-avail/PT1S/xyzf",
    "title" : "Best-avail second data in XYZF orientation, provided by Nurmijarvi, Finland (NUR) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "nur/best-avail/PT1S/hdzf",
    "title" : "Best-avail second data in HDZF orientation, provided by Nurmijarvi, Finland (NUR) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "nur/best-avail/PT1S/diff",
    "title" : "Best-avail second data in DIFF orientation, provided by Nurmijarvi, Finland (NUR) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "nvs/adjusted/PT1M/native",
    "title" : "Adjusted minute data in the coordinate system of measurement of the data ('native'), provided by Novosibirsk, Russia (NVS) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "nvs/adjusted/PT1M/xyzf",
    "title" : "Adjusted minute data in XYZF orientation, provided by Novosibirsk, Russia (NVS) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "nvs/adjusted/PT1M/hdzf",
    "title" : "Adjusted minute data in HDZF orientation, provided by Novosibirsk, Russia (NVS) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "nvs/adjusted/PT1M/diff",
    "title" : "Adjusted minute data in DIFF orientation, provided by Novosibirsk, Russia (NVS) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "nvs/definitive/PT1M/native",
    "title" : "Definitive minute data in the coordinate system of measurement of the data ('native'), provided by Novosibirsk, Russia (NVS) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "nvs/definitive/PT1M/xyzf",
    "title" : "Definitive minute data in XYZF orientation, provided by Novosibirsk, Russia (NVS) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "nvs/definitive/PT1M/hdzf",
    "title" : "Definitive minute data in HDZF orientation, provided by Novosibirsk, Russia (NVS) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "nvs/definitive/PT1M/diff",
    "title" : "Definitive minute data in DIFF orientation, provided by Novosibirsk, Russia (NVS) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "nvs/quasi-def/PT1M/native",
    "title" : "Quasi-def minute data in the coordinate system of measurement of the data ('native'), provided by Novosibirsk, Russia (NVS) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "nvs/quasi-def/PT1M/xyzf",
    "title" : "Quasi-def minute data in XYZF orientation, provided by Novosibirsk, Russia (NVS) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "nvs/quasi-def/PT1M/hdzf",
    "title" : "Quasi-def minute data in HDZF orientation, provided by Novosibirsk, Russia (NVS) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "nvs/quasi-def/PT1M/diff",
    "title" : "Quasi-def minute data in DIFF orientation, provided by Novosibirsk, Russia (NVS) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "nvs/reported/PT1M/native",
    "title" : "Reported minute data in the coordinate system of measurement of the data ('native'), provided by Novosibirsk, Russia (NVS) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "nvs/best-avail/PT1M/native",
    "title" : "Best-avail minute data in the coordinate system of measurement of the data ('native'), provided by Novosibirsk, Russia (NVS) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "nvs/best-avail/PT1M/xyzf",
    "title" : "Best-avail minute data in XYZF orientation, provided by Novosibirsk, Russia (NVS) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "nvs/best-avail/PT1M/hdzf",
    "title" : "Best-avail minute data in HDZF orientation, provided by Novosibirsk, Russia (NVS) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "nvs/best-avail/PT1M/diff",
    "title" : "Best-avail minute data in DIFF orientation, provided by Novosibirsk, Russia (NVS) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "orc/adjusted/PT1M/native",
    "title" : "Adjusted minute data in the coordinate system of measurement of the data ('native'), provided by Base Orcadas, Laurie Island (ORC) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "orc/adjusted/PT1M/xyzf",
    "title" : "Adjusted minute data in XYZF orientation, provided by Base Orcadas, Laurie Island (ORC) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "orc/adjusted/PT1M/hdzf",
    "title" : "Adjusted minute data in HDZF orientation, provided by Base Orcadas, Laurie Island (ORC) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "orc/adjusted/PT1M/diff",
    "title" : "Adjusted minute data in DIFF orientation, provided by Base Orcadas, Laurie Island (ORC) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "orc/definitive/PT1M/native",
    "title" : "Definitive minute data in the coordinate system of measurement of the data ('native'), provided by Base Orcadas, Laurie Island (ORC) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "orc/definitive/PT1M/xyzf",
    "title" : "Definitive minute data in XYZF orientation, provided by Base Orcadas, Laurie Island (ORC) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "orc/definitive/PT1M/hdzf",
    "title" : "Definitive minute data in HDZF orientation, provided by Base Orcadas, Laurie Island (ORC) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "orc/definitive/PT1M/diff",
    "title" : "Definitive minute data in DIFF orientation, provided by Base Orcadas, Laurie Island (ORC) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "orc/quasi-def/PT1M/native",
    "title" : "Quasi-def minute data in the coordinate system of measurement of the data ('native'), provided by Base Orcadas, Laurie Island (ORC) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "orc/quasi-def/PT1M/xyzf",
    "title" : "Quasi-def minute data in XYZF orientation, provided by Base Orcadas, Laurie Island (ORC) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "orc/quasi-def/PT1M/hdzf",
    "title" : "Quasi-def minute data in HDZF orientation, provided by Base Orcadas, Laurie Island (ORC) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "orc/quasi-def/PT1M/diff",
    "title" : "Quasi-def minute data in DIFF orientation, provided by Base Orcadas, Laurie Island (ORC) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "orc/reported/PT1M/native",
    "title" : "Reported minute data in the coordinate system of measurement of the data ('native'), provided by Base Orcadas, Laurie Island (ORC) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "orc/best-avail/PT1M/native",
    "title" : "Best-avail minute data in the coordinate system of measurement of the data ('native'), provided by Base Orcadas, Laurie Island (ORC) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "orc/best-avail/PT1M/xyzf",
    "title" : "Best-avail minute data in XYZF orientation, provided by Base Orcadas, Laurie Island (ORC) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "orc/best-avail/PT1M/hdzf",
    "title" : "Best-avail minute data in HDZF orientation, provided by Base Orcadas, Laurie Island (ORC) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "orc/best-avail/PT1M/diff",
    "title" : "Best-avail minute data in DIFF orientation, provided by Base Orcadas, Laurie Island (ORC) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "ott/definitive/PT1M/native",
    "title" : "Definitive minute data in the coordinate system of measurement of the data ('native'), provided by Ottawa, Canada (OTT) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "ott/definitive/PT1M/xyzf",
    "title" : "Definitive minute data in XYZF orientation, provided by Ottawa, Canada (OTT) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "ott/definitive/PT1M/hdzf",
    "title" : "Definitive minute data in HDZF orientation, provided by Ottawa, Canada (OTT) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "ott/definitive/PT1M/diff",
    "title" : "Definitive minute data in DIFF orientation, provided by Ottawa, Canada (OTT) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "ott/reported/PT1M/native",
    "title" : "Reported minute data in the coordinate system of measurement of the data ('native'), provided by Ottawa, Canada (OTT) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "ott/best-avail/PT1M/native",
    "title" : "Best-avail minute data in the coordinate system of measurement of the data ('native'), provided by Ottawa, Canada (OTT) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "ott/best-avail/PT1M/xyzf",
    "title" : "Best-avail minute data in XYZF orientation, provided by Ottawa, Canada (OTT) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "ott/best-avail/PT1M/hdzf",
    "title" : "Best-avail minute data in HDZF orientation, provided by Ottawa, Canada (OTT) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "ott/best-avail/PT1M/diff",
    "title" : "Best-avail minute data in DIFF orientation, provided by Ottawa, Canada (OTT) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "ott/reported/PT1S/native",
    "title" : "Reported second data in the coordinate system of measurement of the data ('native'), provided by Ottawa, Canada (OTT) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "ott/best-avail/PT1S/native",
    "title" : "Best-avail second data in the coordinate system of measurement of the data ('native'), provided by Ottawa, Canada (OTT) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "ott/best-avail/PT1S/xyzf",
    "title" : "Best-avail second data in XYZF orientation, provided by Ottawa, Canada (OTT) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "ott/best-avail/PT1S/hdzf",
    "title" : "Best-avail second data in HDZF orientation, provided by Ottawa, Canada (OTT) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "ott/best-avail/PT1S/diff",
    "title" : "Best-avail second data in DIFF orientation, provided by Ottawa, Canada (OTT) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "paf/adjusted/PT1M/native",
    "title" : "Adjusted minute data in the coordinate system of measurement of the data ('native'), provided by Port-aux-Francais, Kerguelen Island (PAF) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "paf/adjusted/PT1M/xyzf",
    "title" : "Adjusted minute data in XYZF orientation, provided by Port-aux-Francais, Kerguelen Island (PAF) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "paf/adjusted/PT1M/hdzf",
    "title" : "Adjusted minute data in HDZF orientation, provided by Port-aux-Francais, Kerguelen Island (PAF) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "paf/adjusted/PT1M/diff",
    "title" : "Adjusted minute data in DIFF orientation, provided by Port-aux-Francais, Kerguelen Island (PAF) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "paf/definitive/PT1M/native",
    "title" : "Definitive minute data in the coordinate system of measurement of the data ('native'), provided by Port-aux-Francais, Kerguelen Island (PAF) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "paf/definitive/PT1M/xyzf",
    "title" : "Definitive minute data in XYZF orientation, provided by Port-aux-Francais, Kerguelen Island (PAF) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "paf/definitive/PT1M/hdzf",
    "title" : "Definitive minute data in HDZF orientation, provided by Port-aux-Francais, Kerguelen Island (PAF) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "paf/definitive/PT1M/diff",
    "title" : "Definitive minute data in DIFF orientation, provided by Port-aux-Francais, Kerguelen Island (PAF) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "paf/quasi-def/PT1M/native",
    "title" : "Quasi-def minute data in the coordinate system of measurement of the data ('native'), provided by Port-aux-Francais, Kerguelen Island (PAF) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "paf/quasi-def/PT1M/xyzf",
    "title" : "Quasi-def minute data in XYZF orientation, provided by Port-aux-Francais, Kerguelen Island (PAF) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "paf/quasi-def/PT1M/hdzf",
    "title" : "Quasi-def minute data in HDZF orientation, provided by Port-aux-Francais, Kerguelen Island (PAF) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "paf/quasi-def/PT1M/diff",
    "title" : "Quasi-def minute data in DIFF orientation, provided by Port-aux-Francais, Kerguelen Island (PAF) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "paf/reported/PT1M/native",
    "title" : "Reported minute data in the coordinate system of measurement of the data ('native'), provided by Port-aux-Francais, Kerguelen Island (PAF) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "paf/best-avail/PT1M/native",
    "title" : "Best-avail minute data in the coordinate system of measurement of the data ('native'), provided by Port-aux-Francais, Kerguelen Island (PAF) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "paf/best-avail/PT1M/xyzf",
    "title" : "Best-avail minute data in XYZF orientation, provided by Port-aux-Francais, Kerguelen Island (PAF) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "paf/best-avail/PT1M/hdzf",
    "title" : "Best-avail minute data in HDZF orientation, provided by Port-aux-Francais, Kerguelen Island (PAF) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "paf/best-avail/PT1M/diff",
    "title" : "Best-avail minute data in DIFF orientation, provided by Port-aux-Francais, Kerguelen Island (PAF) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "paf/adjusted/PT1S/native",
    "title" : "Adjusted second data in the coordinate system of measurement of the data ('native'), provided by Port-aux-Francais, Kerguelen Island (PAF) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "paf/adjusted/PT1S/xyzf",
    "title" : "Adjusted second data in XYZF orientation, provided by Port-aux-Francais, Kerguelen Island (PAF) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "paf/adjusted/PT1S/hdzf",
    "title" : "Adjusted second data in HDZF orientation, provided by Port-aux-Francais, Kerguelen Island (PAF) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "paf/adjusted/PT1S/diff",
    "title" : "Adjusted second data in DIFF orientation, provided by Port-aux-Francais, Kerguelen Island (PAF) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "paf/quasi-def/PT1S/native",
    "title" : "Quasi-def second data in the coordinate system of measurement of the data ('native'), provided by Port-aux-Francais, Kerguelen Island (PAF) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "paf/quasi-def/PT1S/xyzf",
    "title" : "Quasi-def second data in XYZF orientation, provided by Port-aux-Francais, Kerguelen Island (PAF) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "paf/quasi-def/PT1S/hdzf",
    "title" : "Quasi-def second data in HDZF orientation, provided by Port-aux-Francais, Kerguelen Island (PAF) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "paf/quasi-def/PT1S/diff",
    "title" : "Quasi-def second data in DIFF orientation, provided by Port-aux-Francais, Kerguelen Island (PAF) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "paf/reported/PT1S/native",
    "title" : "Reported second data in the coordinate system of measurement of the data ('native'), provided by Port-aux-Francais, Kerguelen Island (PAF) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "paf/best-avail/PT1S/native",
    "title" : "Best-avail second data in the coordinate system of measurement of the data ('native'), provided by Port-aux-Francais, Kerguelen Island (PAF) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "paf/best-avail/PT1S/xyzf",
    "title" : "Best-avail second data in XYZF orientation, provided by Port-aux-Francais, Kerguelen Island (PAF) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "paf/best-avail/PT1S/hdzf",
    "title" : "Best-avail second data in HDZF orientation, provided by Port-aux-Francais, Kerguelen Island (PAF) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "paf/best-avail/PT1S/diff",
    "title" : "Best-avail second data in DIFF orientation, provided by Port-aux-Francais, Kerguelen Island (PAF) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "pag/adjusted/PT1M/native",
    "title" : "Adjusted minute data in the coordinate system of measurement of the data ('native'), provided by Panagjurishte, Bulgaria (PAG) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "pag/adjusted/PT1M/xyzf",
    "title" : "Adjusted minute data in XYZF orientation, provided by Panagjurishte, Bulgaria (PAG) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "pag/adjusted/PT1M/hdzf",
    "title" : "Adjusted minute data in HDZF orientation, provided by Panagjurishte, Bulgaria (PAG) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "pag/adjusted/PT1M/diff",
    "title" : "Adjusted minute data in DIFF orientation, provided by Panagjurishte, Bulgaria (PAG) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "pag/definitive/PT1M/native",
    "title" : "Definitive minute data in the coordinate system of measurement of the data ('native'), provided by Panagjurishte, Bulgaria (PAG) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "pag/definitive/PT1M/xyzf",
    "title" : "Definitive minute data in XYZF orientation, provided by Panagjurishte, Bulgaria (PAG) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "pag/definitive/PT1M/hdzf",
    "title" : "Definitive minute data in HDZF orientation, provided by Panagjurishte, Bulgaria (PAG) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "pag/definitive/PT1M/diff",
    "title" : "Definitive minute data in DIFF orientation, provided by Panagjurishte, Bulgaria (PAG) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "pag/quasi-def/PT1M/native",
    "title" : "Quasi-def minute data in the coordinate system of measurement of the data ('native'), provided by Panagjurishte, Bulgaria (PAG) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "pag/quasi-def/PT1M/xyzf",
    "title" : "Quasi-def minute data in XYZF orientation, provided by Panagjurishte, Bulgaria (PAG) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "pag/quasi-def/PT1M/hdzf",
    "title" : "Quasi-def minute data in HDZF orientation, provided by Panagjurishte, Bulgaria (PAG) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "pag/quasi-def/PT1M/diff",
    "title" : "Quasi-def minute data in DIFF orientation, provided by Panagjurishte, Bulgaria (PAG) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "pag/reported/PT1M/native",
    "title" : "Reported minute data in the coordinate system of measurement of the data ('native'), provided by Panagjurishte, Bulgaria (PAG) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "pag/best-avail/PT1M/native",
    "title" : "Best-avail minute data in the coordinate system of measurement of the data ('native'), provided by Panagjurishte, Bulgaria (PAG) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "pag/best-avail/PT1M/xyzf",
    "title" : "Best-avail minute data in XYZF orientation, provided by Panagjurishte, Bulgaria (PAG) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "pag/best-avail/PT1M/hdzf",
    "title" : "Best-avail minute data in HDZF orientation, provided by Panagjurishte, Bulgaria (PAG) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "pag/best-avail/PT1M/diff",
    "title" : "Best-avail minute data in DIFF orientation, provided by Panagjurishte, Bulgaria (PAG) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "pbq/definitive/PT1M/native",
    "title" : "Definitive minute data in the coordinate system of measurement of the data ('native'), provided by Poste-de-la-Baleine, Canada (PBQ) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "pbq/definitive/PT1M/xyzf",
    "title" : "Definitive minute data in XYZF orientation, provided by Poste-de-la-Baleine, Canada (PBQ) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "pbq/definitive/PT1M/hdzf",
    "title" : "Definitive minute data in HDZF orientation, provided by Poste-de-la-Baleine, Canada (PBQ) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "pbq/definitive/PT1M/diff",
    "title" : "Definitive minute data in DIFF orientation, provided by Poste-de-la-Baleine, Canada (PBQ) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "pbq/reported/PT1M/native",
    "title" : "Reported minute data in the coordinate system of measurement of the data ('native'), provided by Poste-de-la-Baleine, Canada (PBQ) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "pbq/best-avail/PT1M/native",
    "title" : "Best-avail minute data in the coordinate system of measurement of the data ('native'), provided by Poste-de-la-Baleine, Canada (PBQ) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "pbq/best-avail/PT1M/xyzf",
    "title" : "Best-avail minute data in XYZF orientation, provided by Poste-de-la-Baleine, Canada (PBQ) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "pbq/best-avail/PT1M/hdzf",
    "title" : "Best-avail minute data in HDZF orientation, provided by Poste-de-la-Baleine, Canada (PBQ) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "pbq/best-avail/PT1M/diff",
    "title" : "Best-avail minute data in DIFF orientation, provided by Poste-de-la-Baleine, Canada (PBQ) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "peg/adjusted/PT1M/native",
    "title" : "Adjusted minute data in the coordinate system of measurement of the data ('native'), provided by Pedeli, Greece (PEG) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "peg/adjusted/PT1M/xyzf",
    "title" : "Adjusted minute data in XYZF orientation, provided by Pedeli, Greece (PEG) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "peg/adjusted/PT1M/hdzf",
    "title" : "Adjusted minute data in HDZF orientation, provided by Pedeli, Greece (PEG) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "peg/adjusted/PT1M/diff",
    "title" : "Adjusted minute data in DIFF orientation, provided by Pedeli, Greece (PEG) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "peg/definitive/PT1M/native",
    "title" : "Definitive minute data in the coordinate system of measurement of the data ('native'), provided by Pedeli, Greece (PEG) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "peg/definitive/PT1M/xyzf",
    "title" : "Definitive minute data in XYZF orientation, provided by Pedeli, Greece (PEG) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "peg/definitive/PT1M/hdzf",
    "title" : "Definitive minute data in HDZF orientation, provided by Pedeli, Greece (PEG) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "peg/definitive/PT1M/diff",
    "title" : "Definitive minute data in DIFF orientation, provided by Pedeli, Greece (PEG) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "peg/reported/PT1M/native",
    "title" : "Reported minute data in the coordinate system of measurement of the data ('native'), provided by Pedeli, Greece (PEG) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "peg/best-avail/PT1M/native",
    "title" : "Best-avail minute data in the coordinate system of measurement of the data ('native'), provided by Pedeli, Greece (PEG) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "peg/best-avail/PT1M/xyzf",
    "title" : "Best-avail minute data in XYZF orientation, provided by Pedeli, Greece (PEG) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "peg/best-avail/PT1M/hdzf",
    "title" : "Best-avail minute data in HDZF orientation, provided by Pedeli, Greece (PEG) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "peg/best-avail/PT1M/diff",
    "title" : "Best-avail minute data in DIFF orientation, provided by Pedeli, Greece (PEG) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "peg/reported/PT1S/native",
    "title" : "Reported second data in the coordinate system of measurement of the data ('native'), provided by Pedeli, Greece (PEG) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "peg/best-avail/PT1S/native",
    "title" : "Best-avail second data in the coordinate system of measurement of the data ('native'), provided by Pedeli, Greece (PEG) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "peg/best-avail/PT1S/xyzf",
    "title" : "Best-avail second data in XYZF orientation, provided by Pedeli, Greece (PEG) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "peg/best-avail/PT1S/hdzf",
    "title" : "Best-avail second data in HDZF orientation, provided by Pedeli, Greece (PEG) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "peg/best-avail/PT1S/diff",
    "title" : "Best-avail second data in DIFF orientation, provided by Pedeli, Greece (PEG) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "pet/adjusted/PT1M/native",
    "title" : "Adjusted minute data in the coordinate system of measurement of the data ('native'), provided by Paratunka, Russia (PET) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "pet/adjusted/PT1M/xyzf",
    "title" : "Adjusted minute data in XYZF orientation, provided by Paratunka, Russia (PET) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "pet/adjusted/PT1M/hdzf",
    "title" : "Adjusted minute data in HDZF orientation, provided by Paratunka, Russia (PET) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "pet/adjusted/PT1M/diff",
    "title" : "Adjusted minute data in DIFF orientation, provided by Paratunka, Russia (PET) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "pet/definitive/PT1M/native",
    "title" : "Definitive minute data in the coordinate system of measurement of the data ('native'), provided by Paratunka, Russia (PET) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "pet/definitive/PT1M/xyzf",
    "title" : "Definitive minute data in XYZF orientation, provided by Paratunka, Russia (PET) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "pet/definitive/PT1M/hdzf",
    "title" : "Definitive minute data in HDZF orientation, provided by Paratunka, Russia (PET) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "pet/definitive/PT1M/diff",
    "title" : "Definitive minute data in DIFF orientation, provided by Paratunka, Russia (PET) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "pet/quasi-def/PT1M/native",
    "title" : "Quasi-def minute data in the coordinate system of measurement of the data ('native'), provided by Paratunka, Russia (PET) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "pet/quasi-def/PT1M/xyzf",
    "title" : "Quasi-def minute data in XYZF orientation, provided by Paratunka, Russia (PET) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "pet/quasi-def/PT1M/hdzf",
    "title" : "Quasi-def minute data in HDZF orientation, provided by Paratunka, Russia (PET) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "pet/quasi-def/PT1M/diff",
    "title" : "Quasi-def minute data in DIFF orientation, provided by Paratunka, Russia (PET) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "pet/reported/PT1M/native",
    "title" : "Reported minute data in the coordinate system of measurement of the data ('native'), provided by Paratunka, Russia (PET) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "pet/best-avail/PT1M/native",
    "title" : "Best-avail minute data in the coordinate system of measurement of the data ('native'), provided by Paratunka, Russia (PET) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "pet/best-avail/PT1M/xyzf",
    "title" : "Best-avail minute data in XYZF orientation, provided by Paratunka, Russia (PET) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "pet/best-avail/PT1M/hdzf",
    "title" : "Best-avail minute data in HDZF orientation, provided by Paratunka, Russia (PET) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "pet/best-avail/PT1M/diff",
    "title" : "Best-avail minute data in DIFF orientation, provided by Paratunka, Russia (PET) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "phu/definitive/PT1M/native",
    "title" : "Definitive minute data in the coordinate system of measurement of the data ('native'), provided by Phuthuy, Vietnam (PHU) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "phu/definitive/PT1M/xyzf",
    "title" : "Definitive minute data in XYZF orientation, provided by Phuthuy, Vietnam (PHU) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "phu/definitive/PT1M/hdzf",
    "title" : "Definitive minute data in HDZF orientation, provided by Phuthuy, Vietnam (PHU) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "phu/definitive/PT1M/diff",
    "title" : "Definitive minute data in DIFF orientation, provided by Phuthuy, Vietnam (PHU) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "phu/quasi-def/PT1M/native",
    "title" : "Quasi-def minute data in the coordinate system of measurement of the data ('native'), provided by Phuthuy, Vietnam (PHU) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "phu/quasi-def/PT1M/xyzf",
    "title" : "Quasi-def minute data in XYZF orientation, provided by Phuthuy, Vietnam (PHU) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "phu/quasi-def/PT1M/hdzf",
    "title" : "Quasi-def minute data in HDZF orientation, provided by Phuthuy, Vietnam (PHU) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "phu/quasi-def/PT1M/diff",
    "title" : "Quasi-def minute data in DIFF orientation, provided by Phuthuy, Vietnam (PHU) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "phu/reported/PT1M/native",
    "title" : "Reported minute data in the coordinate system of measurement of the data ('native'), provided by Phuthuy, Vietnam (PHU) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "phu/best-avail/PT1M/native",
    "title" : "Best-avail minute data in the coordinate system of measurement of the data ('native'), provided by Phuthuy, Vietnam (PHU) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "phu/best-avail/PT1M/xyzf",
    "title" : "Best-avail minute data in XYZF orientation, provided by Phuthuy, Vietnam (PHU) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "phu/best-avail/PT1M/hdzf",
    "title" : "Best-avail minute data in HDZF orientation, provided by Phuthuy, Vietnam (PHU) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "phu/best-avail/PT1M/diff",
    "title" : "Best-avail minute data in DIFF orientation, provided by Phuthuy, Vietnam (PHU) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "phu/quasi-def/PT1S/native",
    "title" : "Quasi-def second data in the coordinate system of measurement of the data ('native'), provided by Phuthuy, Vietnam (PHU) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "phu/quasi-def/PT1S/xyzf",
    "title" : "Quasi-def second data in XYZF orientation, provided by Phuthuy, Vietnam (PHU) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "phu/quasi-def/PT1S/hdzf",
    "title" : "Quasi-def second data in HDZF orientation, provided by Phuthuy, Vietnam (PHU) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "phu/quasi-def/PT1S/diff",
    "title" : "Quasi-def second data in DIFF orientation, provided by Phuthuy, Vietnam (PHU) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "phu/reported/PT1S/native",
    "title" : "Reported second data in the coordinate system of measurement of the data ('native'), provided by Phuthuy, Vietnam (PHU) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "phu/best-avail/PT1S/native",
    "title" : "Best-avail second data in the coordinate system of measurement of the data ('native'), provided by Phuthuy, Vietnam (PHU) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "phu/best-avail/PT1S/xyzf",
    "title" : "Best-avail second data in XYZF orientation, provided by Phuthuy, Vietnam (PHU) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "phu/best-avail/PT1S/hdzf",
    "title" : "Best-avail second data in HDZF orientation, provided by Phuthuy, Vietnam (PHU) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "phu/best-avail/PT1S/diff",
    "title" : "Best-avail second data in DIFF orientation, provided by Phuthuy, Vietnam (PHU) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "pil/adjusted/PT1M/native",
    "title" : "Adjusted minute data in the coordinate system of measurement of the data ('native'), provided by Pilar, Argentina (PIL) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "pil/adjusted/PT1M/xyzf",
    "title" : "Adjusted minute data in XYZF orientation, provided by Pilar, Argentina (PIL) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "pil/adjusted/PT1M/hdzf",
    "title" : "Adjusted minute data in HDZF orientation, provided by Pilar, Argentina (PIL) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "pil/adjusted/PT1M/diff",
    "title" : "Adjusted minute data in DIFF orientation, provided by Pilar, Argentina (PIL) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "pil/definitive/PT1M/native",
    "title" : "Definitive minute data in the coordinate system of measurement of the data ('native'), provided by Pilar, Argentina (PIL) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "pil/definitive/PT1M/xyzf",
    "title" : "Definitive minute data in XYZF orientation, provided by Pilar, Argentina (PIL) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "pil/definitive/PT1M/hdzf",
    "title" : "Definitive minute data in HDZF orientation, provided by Pilar, Argentina (PIL) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "pil/definitive/PT1M/diff",
    "title" : "Definitive minute data in DIFF orientation, provided by Pilar, Argentina (PIL) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "pil/quasi-def/PT1M/native",
    "title" : "Quasi-def minute data in the coordinate system of measurement of the data ('native'), provided by Pilar, Argentina (PIL) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "pil/quasi-def/PT1M/xyzf",
    "title" : "Quasi-def minute data in XYZF orientation, provided by Pilar, Argentina (PIL) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "pil/quasi-def/PT1M/hdzf",
    "title" : "Quasi-def minute data in HDZF orientation, provided by Pilar, Argentina (PIL) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "pil/quasi-def/PT1M/diff",
    "title" : "Quasi-def minute data in DIFF orientation, provided by Pilar, Argentina (PIL) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "pil/reported/PT1M/native",
    "title" : "Reported minute data in the coordinate system of measurement of the data ('native'), provided by Pilar, Argentina (PIL) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "pil/best-avail/PT1M/native",
    "title" : "Best-avail minute data in the coordinate system of measurement of the data ('native'), provided by Pilar, Argentina (PIL) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "pil/best-avail/PT1M/xyzf",
    "title" : "Best-avail minute data in XYZF orientation, provided by Pilar, Argentina (PIL) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "pil/best-avail/PT1M/hdzf",
    "title" : "Best-avail minute data in HDZF orientation, provided by Pilar, Argentina (PIL) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "pil/best-avail/PT1M/diff",
    "title" : "Best-avail minute data in DIFF orientation, provided by Pilar, Argentina (PIL) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "ppt/definitive/PT1M/native",
    "title" : "Definitive minute data in the coordinate system of measurement of the data ('native'), provided by Pamatai, Tahiti, France (PPT) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "ppt/definitive/PT1M/xyzf",
    "title" : "Definitive minute data in XYZF orientation, provided by Pamatai, Tahiti, France (PPT) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "ppt/definitive/PT1M/hdzf",
    "title" : "Definitive minute data in HDZF orientation, provided by Pamatai, Tahiti, France (PPT) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "ppt/definitive/PT1M/diff",
    "title" : "Definitive minute data in DIFF orientation, provided by Pamatai, Tahiti, France (PPT) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "ppt/quasi-def/PT1M/native",
    "title" : "Quasi-def minute data in the coordinate system of measurement of the data ('native'), provided by Pamatai, Tahiti, France (PPT) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "ppt/quasi-def/PT1M/xyzf",
    "title" : "Quasi-def minute data in XYZF orientation, provided by Pamatai, Tahiti, France (PPT) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "ppt/quasi-def/PT1M/hdzf",
    "title" : "Quasi-def minute data in HDZF orientation, provided by Pamatai, Tahiti, France (PPT) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "ppt/quasi-def/PT1M/diff",
    "title" : "Quasi-def minute data in DIFF orientation, provided by Pamatai, Tahiti, France (PPT) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "ppt/reported/PT1M/native",
    "title" : "Reported minute data in the coordinate system of measurement of the data ('native'), provided by Pamatai, Tahiti, France (PPT) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "ppt/best-avail/PT1M/native",
    "title" : "Best-avail minute data in the coordinate system of measurement of the data ('native'), provided by Pamatai, Tahiti, France (PPT) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "ppt/best-avail/PT1M/xyzf",
    "title" : "Best-avail minute data in XYZF orientation, provided by Pamatai, Tahiti, France (PPT) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "ppt/best-avail/PT1M/hdzf",
    "title" : "Best-avail minute data in HDZF orientation, provided by Pamatai, Tahiti, France (PPT) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "ppt/best-avail/PT1M/diff",
    "title" : "Best-avail minute data in DIFF orientation, provided by Pamatai, Tahiti, France (PPT) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "ppt/quasi-def/PT1S/native",
    "title" : "Quasi-def second data in the coordinate system of measurement of the data ('native'), provided by Pamatai, Tahiti, France (PPT) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "ppt/quasi-def/PT1S/xyzf",
    "title" : "Quasi-def second data in XYZF orientation, provided by Pamatai, Tahiti, France (PPT) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "ppt/quasi-def/PT1S/hdzf",
    "title" : "Quasi-def second data in HDZF orientation, provided by Pamatai, Tahiti, France (PPT) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "ppt/quasi-def/PT1S/diff",
    "title" : "Quasi-def second data in DIFF orientation, provided by Pamatai, Tahiti, France (PPT) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "ppt/reported/PT1S/native",
    "title" : "Reported second data in the coordinate system of measurement of the data ('native'), provided by Pamatai, Tahiti, France (PPT) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "ppt/best-avail/PT1S/native",
    "title" : "Best-avail second data in the coordinate system of measurement of the data ('native'), provided by Pamatai, Tahiti, France (PPT) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "ppt/best-avail/PT1S/xyzf",
    "title" : "Best-avail second data in XYZF orientation, provided by Pamatai, Tahiti, France (PPT) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "ppt/best-avail/PT1S/hdzf",
    "title" : "Best-avail second data in HDZF orientation, provided by Pamatai, Tahiti, France (PPT) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "ppt/best-avail/PT1S/diff",
    "title" : "Best-avail second data in DIFF orientation, provided by Pamatai, Tahiti, France (PPT) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "pst/adjusted/PT1M/native",
    "title" : "Adjusted minute data in the coordinate system of measurement of the data ('native'), provided by Port Stanley, Falklands Islands (PST) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "pst/adjusted/PT1M/xyzf",
    "title" : "Adjusted minute data in XYZF orientation, provided by Port Stanley, Falklands Islands (PST) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "pst/adjusted/PT1M/hdzf",
    "title" : "Adjusted minute data in HDZF orientation, provided by Port Stanley, Falklands Islands (PST) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "pst/adjusted/PT1M/diff",
    "title" : "Adjusted minute data in DIFF orientation, provided by Port Stanley, Falklands Islands (PST) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "pst/definitive/PT1M/native",
    "title" : "Definitive minute data in the coordinate system of measurement of the data ('native'), provided by Port Stanley, Falklands Islands (PST) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "pst/definitive/PT1M/xyzf",
    "title" : "Definitive minute data in XYZF orientation, provided by Port Stanley, Falklands Islands (PST) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "pst/definitive/PT1M/hdzf",
    "title" : "Definitive minute data in HDZF orientation, provided by Port Stanley, Falklands Islands (PST) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "pst/definitive/PT1M/diff",
    "title" : "Definitive minute data in DIFF orientation, provided by Port Stanley, Falklands Islands (PST) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "pst/quasi-def/PT1M/native",
    "title" : "Quasi-def minute data in the coordinate system of measurement of the data ('native'), provided by Port Stanley, Falklands Islands (PST) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "pst/quasi-def/PT1M/xyzf",
    "title" : "Quasi-def minute data in XYZF orientation, provided by Port Stanley, Falklands Islands (PST) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "pst/quasi-def/PT1M/hdzf",
    "title" : "Quasi-def minute data in HDZF orientation, provided by Port Stanley, Falklands Islands (PST) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "pst/quasi-def/PT1M/diff",
    "title" : "Quasi-def minute data in DIFF orientation, provided by Port Stanley, Falklands Islands (PST) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "pst/reported/PT1M/native",
    "title" : "Reported minute data in the coordinate system of measurement of the data ('native'), provided by Port Stanley, Falklands Islands (PST) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "pst/best-avail/PT1M/native",
    "title" : "Best-avail minute data in the coordinate system of measurement of the data ('native'), provided by Port Stanley, Falklands Islands (PST) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "pst/best-avail/PT1M/xyzf",
    "title" : "Best-avail minute data in XYZF orientation, provided by Port Stanley, Falklands Islands (PST) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "pst/best-avail/PT1M/hdzf",
    "title" : "Best-avail minute data in HDZF orientation, provided by Port Stanley, Falklands Islands (PST) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "pst/best-avail/PT1M/diff",
    "title" : "Best-avail minute data in DIFF orientation, provided by Port Stanley, Falklands Islands (PST) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "pst/adjusted/PT1S/native",
    "title" : "Adjusted second data in the coordinate system of measurement of the data ('native'), provided by Port Stanley, Falklands Islands (PST) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "pst/adjusted/PT1S/xyzf",
    "title" : "Adjusted second data in XYZF orientation, provided by Port Stanley, Falklands Islands (PST) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "pst/adjusted/PT1S/hdzf",
    "title" : "Adjusted second data in HDZF orientation, provided by Port Stanley, Falklands Islands (PST) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "pst/adjusted/PT1S/diff",
    "title" : "Adjusted second data in DIFF orientation, provided by Port Stanley, Falklands Islands (PST) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "pst/quasi-def/PT1S/native",
    "title" : "Quasi-def second data in the coordinate system of measurement of the data ('native'), provided by Port Stanley, Falklands Islands (PST) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "pst/quasi-def/PT1S/xyzf",
    "title" : "Quasi-def second data in XYZF orientation, provided by Port Stanley, Falklands Islands (PST) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "pst/quasi-def/PT1S/hdzf",
    "title" : "Quasi-def second data in HDZF orientation, provided by Port Stanley, Falklands Islands (PST) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "pst/quasi-def/PT1S/diff",
    "title" : "Quasi-def second data in DIFF orientation, provided by Port Stanley, Falklands Islands (PST) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "pst/best-avail/PT1S/native",
    "title" : "Best-avail second data in the coordinate system of measurement of the data ('native'), provided by Port Stanley, Falklands Islands (PST) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "pst/best-avail/PT1S/xyzf",
    "title" : "Best-avail second data in XYZF orientation, provided by Port Stanley, Falklands Islands (PST) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "pst/best-avail/PT1S/hdzf",
    "title" : "Best-avail second data in HDZF orientation, provided by Port Stanley, Falklands Islands (PST) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "pst/best-avail/PT1S/diff",
    "title" : "Best-avail second data in DIFF orientation, provided by Port Stanley, Falklands Islands (PST) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "qsb/definitive/PT1M/native",
    "title" : "Definitive minute data in the coordinate system of measurement of the data ('native'), provided by Qsaybeh, Lebanon (QSB) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "qsb/definitive/PT1M/xyzf",
    "title" : "Definitive minute data in XYZF orientation, provided by Qsaybeh, Lebanon (QSB) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "qsb/definitive/PT1M/hdzf",
    "title" : "Definitive minute data in HDZF orientation, provided by Qsaybeh, Lebanon (QSB) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "qsb/definitive/PT1M/diff",
    "title" : "Definitive minute data in DIFF orientation, provided by Qsaybeh, Lebanon (QSB) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "qsb/reported/PT1M/native",
    "title" : "Reported minute data in the coordinate system of measurement of the data ('native'), provided by Qsaybeh, Lebanon (QSB) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "qsb/best-avail/PT1M/native",
    "title" : "Best-avail minute data in the coordinate system of measurement of the data ('native'), provided by Qsaybeh, Lebanon (QSB) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "qsb/best-avail/PT1M/xyzf",
    "title" : "Best-avail minute data in XYZF orientation, provided by Qsaybeh, Lebanon (QSB) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "qsb/best-avail/PT1M/hdzf",
    "title" : "Best-avail minute data in HDZF orientation, provided by Qsaybeh, Lebanon (QSB) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "qsb/best-avail/PT1M/diff",
    "title" : "Best-avail minute data in DIFF orientation, provided by Qsaybeh, Lebanon (QSB) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "res/definitive/PT1M/native",
    "title" : "Definitive minute data in the coordinate system of measurement of the data ('native'), provided by Resolute Bay, Canada (RES) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "res/definitive/PT1M/xyzf",
    "title" : "Definitive minute data in XYZF orientation, provided by Resolute Bay, Canada (RES) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "res/definitive/PT1M/hdzf",
    "title" : "Definitive minute data in HDZF orientation, provided by Resolute Bay, Canada (RES) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "res/definitive/PT1M/diff",
    "title" : "Definitive minute data in DIFF orientation, provided by Resolute Bay, Canada (RES) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "res/reported/PT1M/native",
    "title" : "Reported minute data in the coordinate system of measurement of the data ('native'), provided by Resolute Bay, Canada (RES) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "res/best-avail/PT1M/native",
    "title" : "Best-avail minute data in the coordinate system of measurement of the data ('native'), provided by Resolute Bay, Canada (RES) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "res/best-avail/PT1M/xyzf",
    "title" : "Best-avail minute data in XYZF orientation, provided by Resolute Bay, Canada (RES) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "res/best-avail/PT1M/hdzf",
    "title" : "Best-avail minute data in HDZF orientation, provided by Resolute Bay, Canada (RES) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "res/best-avail/PT1M/diff",
    "title" : "Best-avail minute data in DIFF orientation, provided by Resolute Bay, Canada (RES) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "res/reported/PT1S/native",
    "title" : "Reported second data in the coordinate system of measurement of the data ('native'), provided by Resolute Bay, Canada (RES) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "res/best-avail/PT1S/native",
    "title" : "Best-avail second data in the coordinate system of measurement of the data ('native'), provided by Resolute Bay, Canada (RES) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "res/best-avail/PT1S/xyzf",
    "title" : "Best-avail second data in XYZF orientation, provided by Resolute Bay, Canada (RES) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "res/best-avail/PT1S/hdzf",
    "title" : "Best-avail second data in HDZF orientation, provided by Resolute Bay, Canada (RES) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "res/best-avail/PT1S/diff",
    "title" : "Best-avail second data in DIFF orientation, provided by Resolute Bay, Canada (RES) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "reu/quasi-def/PT1M/native",
    "title" : "Quasi-def minute data in the coordinate system of measurement of the data ('native'), provided by La Reunion Island, France (REU) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "reu/quasi-def/PT1M/xyzf",
    "title" : "Quasi-def minute data in XYZF orientation, provided by La Reunion Island, France (REU) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "reu/quasi-def/PT1M/hdzf",
    "title" : "Quasi-def minute data in HDZF orientation, provided by La Reunion Island, France (REU) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "reu/quasi-def/PT1M/diff",
    "title" : "Quasi-def minute data in DIFF orientation, provided by La Reunion Island, France (REU) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "reu/reported/PT1M/native",
    "title" : "Reported minute data in the coordinate system of measurement of the data ('native'), provided by La Reunion Island, France (REU) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "reu/best-avail/PT1M/native",
    "title" : "Best-avail minute data in the coordinate system of measurement of the data ('native'), provided by La Reunion Island, France (REU) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "reu/best-avail/PT1M/xyzf",
    "title" : "Best-avail minute data in XYZF orientation, provided by La Reunion Island, France (REU) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "reu/best-avail/PT1M/hdzf",
    "title" : "Best-avail minute data in HDZF orientation, provided by La Reunion Island, France (REU) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "reu/best-avail/PT1M/diff",
    "title" : "Best-avail minute data in DIFF orientation, provided by La Reunion Island, France (REU) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "reu/quasi-def/PT1S/native",
    "title" : "Quasi-def second data in the coordinate system of measurement of the data ('native'), provided by La Reunion Island, France (REU) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "reu/quasi-def/PT1S/xyzf",
    "title" : "Quasi-def second data in XYZF orientation, provided by La Reunion Island, France (REU) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "reu/quasi-def/PT1S/hdzf",
    "title" : "Quasi-def second data in HDZF orientation, provided by La Reunion Island, France (REU) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "reu/quasi-def/PT1S/diff",
    "title" : "Quasi-def second data in DIFF orientation, provided by La Reunion Island, France (REU) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "reu/reported/PT1S/native",
    "title" : "Reported second data in the coordinate system of measurement of the data ('native'), provided by La Reunion Island, France (REU) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "reu/best-avail/PT1S/native",
    "title" : "Best-avail second data in the coordinate system of measurement of the data ('native'), provided by La Reunion Island, France (REU) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "reu/best-avail/PT1S/xyzf",
    "title" : "Best-avail second data in XYZF orientation, provided by La Reunion Island, France (REU) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "reu/best-avail/PT1S/hdzf",
    "title" : "Best-avail second data in HDZF orientation, provided by La Reunion Island, France (REU) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "reu/best-avail/PT1S/diff",
    "title" : "Best-avail second data in DIFF orientation, provided by La Reunion Island, France (REU) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "sba/adjusted/PT1M/native",
    "title" : "Adjusted minute data in the coordinate system of measurement of the data ('native'), provided by Scott Base, Antarctica (SBA) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "sba/adjusted/PT1M/xyzf",
    "title" : "Adjusted minute data in XYZF orientation, provided by Scott Base, Antarctica (SBA) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "sba/adjusted/PT1M/hdzf",
    "title" : "Adjusted minute data in HDZF orientation, provided by Scott Base, Antarctica (SBA) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "sba/adjusted/PT1M/diff",
    "title" : "Adjusted minute data in DIFF orientation, provided by Scott Base, Antarctica (SBA) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "sba/definitive/PT1M/native",
    "title" : "Definitive minute data in the coordinate system of measurement of the data ('native'), provided by Scott Base, Antarctica (SBA) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "sba/definitive/PT1M/xyzf",
    "title" : "Definitive minute data in XYZF orientation, provided by Scott Base, Antarctica (SBA) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "sba/definitive/PT1M/hdzf",
    "title" : "Definitive minute data in HDZF orientation, provided by Scott Base, Antarctica (SBA) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "sba/definitive/PT1M/diff",
    "title" : "Definitive minute data in DIFF orientation, provided by Scott Base, Antarctica (SBA) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "sba/quasi-def/PT1M/native",
    "title" : "Quasi-def minute data in the coordinate system of measurement of the data ('native'), provided by Scott Base, Antarctica (SBA) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "sba/quasi-def/PT1M/xyzf",
    "title" : "Quasi-def minute data in XYZF orientation, provided by Scott Base, Antarctica (SBA) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "sba/quasi-def/PT1M/hdzf",
    "title" : "Quasi-def minute data in HDZF orientation, provided by Scott Base, Antarctica (SBA) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "sba/quasi-def/PT1M/diff",
    "title" : "Quasi-def minute data in DIFF orientation, provided by Scott Base, Antarctica (SBA) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "sba/reported/PT1M/native",
    "title" : "Reported minute data in the coordinate system of measurement of the data ('native'), provided by Scott Base, Antarctica (SBA) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "sba/best-avail/PT1M/native",
    "title" : "Best-avail minute data in the coordinate system of measurement of the data ('native'), provided by Scott Base, Antarctica (SBA) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "sba/best-avail/PT1M/xyzf",
    "title" : "Best-avail minute data in XYZF orientation, provided by Scott Base, Antarctica (SBA) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "sba/best-avail/PT1M/hdzf",
    "title" : "Best-avail minute data in HDZF orientation, provided by Scott Base, Antarctica (SBA) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "sba/best-avail/PT1M/diff",
    "title" : "Best-avail minute data in DIFF orientation, provided by Scott Base, Antarctica (SBA) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "sba/adjusted/PT1S/native",
    "title" : "Adjusted second data in the coordinate system of measurement of the data ('native'), provided by Scott Base, Antarctica (SBA) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "sba/adjusted/PT1S/xyzf",
    "title" : "Adjusted second data in XYZF orientation, provided by Scott Base, Antarctica (SBA) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "sba/adjusted/PT1S/hdzf",
    "title" : "Adjusted second data in HDZF orientation, provided by Scott Base, Antarctica (SBA) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "sba/adjusted/PT1S/diff",
    "title" : "Adjusted second data in DIFF orientation, provided by Scott Base, Antarctica (SBA) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "sba/reported/PT1S/native",
    "title" : "Reported second data in the coordinate system of measurement of the data ('native'), provided by Scott Base, Antarctica (SBA) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "sba/best-avail/PT1S/native",
    "title" : "Best-avail second data in the coordinate system of measurement of the data ('native'), provided by Scott Base, Antarctica (SBA) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "sba/best-avail/PT1S/xyzf",
    "title" : "Best-avail second data in XYZF orientation, provided by Scott Base, Antarctica (SBA) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "sba/best-avail/PT1S/hdzf",
    "title" : "Best-avail second data in HDZF orientation, provided by Scott Base, Antarctica (SBA) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "sba/best-avail/PT1S/diff",
    "title" : "Best-avail second data in DIFF orientation, provided by Scott Base, Antarctica (SBA) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "sbl/adjusted/PT1M/native",
    "title" : "Adjusted minute data in the coordinate system of measurement of the data ('native'), provided by Sable Island, Canada (SBL) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "sbl/adjusted/PT1M/xyzf",
    "title" : "Adjusted minute data in XYZF orientation, provided by Sable Island, Canada (SBL) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "sbl/adjusted/PT1M/hdzf",
    "title" : "Adjusted minute data in HDZF orientation, provided by Sable Island, Canada (SBL) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "sbl/adjusted/PT1M/diff",
    "title" : "Adjusted minute data in DIFF orientation, provided by Sable Island, Canada (SBL) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "sbl/definitive/PT1M/native",
    "title" : "Definitive minute data in the coordinate system of measurement of the data ('native'), provided by Sable Island, Canada (SBL) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "sbl/definitive/PT1M/xyzf",
    "title" : "Definitive minute data in XYZF orientation, provided by Sable Island, Canada (SBL) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "sbl/definitive/PT1M/hdzf",
    "title" : "Definitive minute data in HDZF orientation, provided by Sable Island, Canada (SBL) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "sbl/definitive/PT1M/diff",
    "title" : "Definitive minute data in DIFF orientation, provided by Sable Island, Canada (SBL) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "sbl/quasi-def/PT1M/native",
    "title" : "Quasi-def minute data in the coordinate system of measurement of the data ('native'), provided by Sable Island, Canada (SBL) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "sbl/quasi-def/PT1M/xyzf",
    "title" : "Quasi-def minute data in XYZF orientation, provided by Sable Island, Canada (SBL) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "sbl/quasi-def/PT1M/hdzf",
    "title" : "Quasi-def minute data in HDZF orientation, provided by Sable Island, Canada (SBL) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "sbl/quasi-def/PT1M/diff",
    "title" : "Quasi-def minute data in DIFF orientation, provided by Sable Island, Canada (SBL) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "sbl/reported/PT1M/native",
    "title" : "Reported minute data in the coordinate system of measurement of the data ('native'), provided by Sable Island, Canada (SBL) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "sbl/best-avail/PT1M/native",
    "title" : "Best-avail minute data in the coordinate system of measurement of the data ('native'), provided by Sable Island, Canada (SBL) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "sbl/best-avail/PT1M/xyzf",
    "title" : "Best-avail minute data in XYZF orientation, provided by Sable Island, Canada (SBL) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "sbl/best-avail/PT1M/hdzf",
    "title" : "Best-avail minute data in HDZF orientation, provided by Sable Island, Canada (SBL) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "sbl/best-avail/PT1M/diff",
    "title" : "Best-avail minute data in DIFF orientation, provided by Sable Island, Canada (SBL) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "sbl/adjusted/PT1S/native",
    "title" : "Adjusted second data in the coordinate system of measurement of the data ('native'), provided by Sable Island, Canada (SBL) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "sbl/adjusted/PT1S/xyzf",
    "title" : "Adjusted second data in XYZF orientation, provided by Sable Island, Canada (SBL) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "sbl/adjusted/PT1S/hdzf",
    "title" : "Adjusted second data in HDZF orientation, provided by Sable Island, Canada (SBL) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "sbl/adjusted/PT1S/diff",
    "title" : "Adjusted second data in DIFF orientation, provided by Sable Island, Canada (SBL) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "sbl/best-avail/PT1S/native",
    "title" : "Best-avail second data in the coordinate system of measurement of the data ('native'), provided by Sable Island, Canada (SBL) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "sbl/best-avail/PT1S/xyzf",
    "title" : "Best-avail second data in XYZF orientation, provided by Sable Island, Canada (SBL) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "sbl/best-avail/PT1S/hdzf",
    "title" : "Best-avail second data in HDZF orientation, provided by Sable Island, Canada (SBL) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "sbl/best-avail/PT1S/diff",
    "title" : "Best-avail second data in DIFF orientation, provided by Sable Island, Canada (SBL) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "sfs/adjusted/PT1M/native",
    "title" : "Adjusted minute data in the coordinate system of measurement of the data ('native'), provided by San Fernando, Spain (SFS) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "sfs/adjusted/PT1M/xyzf",
    "title" : "Adjusted minute data in XYZF orientation, provided by San Fernando, Spain (SFS) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "sfs/adjusted/PT1M/hdzf",
    "title" : "Adjusted minute data in HDZF orientation, provided by San Fernando, Spain (SFS) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "sfs/adjusted/PT1M/diff",
    "title" : "Adjusted minute data in DIFF orientation, provided by San Fernando, Spain (SFS) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "sfs/definitive/PT1M/native",
    "title" : "Definitive minute data in the coordinate system of measurement of the data ('native'), provided by San Fernando, Spain (SFS) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "sfs/definitive/PT1M/xyzf",
    "title" : "Definitive minute data in XYZF orientation, provided by San Fernando, Spain (SFS) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "sfs/definitive/PT1M/hdzf",
    "title" : "Definitive minute data in HDZF orientation, provided by San Fernando, Spain (SFS) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "sfs/definitive/PT1M/diff",
    "title" : "Definitive minute data in DIFF orientation, provided by San Fernando, Spain (SFS) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "sfs/quasi-def/PT1M/native",
    "title" : "Quasi-def minute data in the coordinate system of measurement of the data ('native'), provided by San Fernando, Spain (SFS) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "sfs/quasi-def/PT1M/xyzf",
    "title" : "Quasi-def minute data in XYZF orientation, provided by San Fernando, Spain (SFS) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "sfs/quasi-def/PT1M/hdzf",
    "title" : "Quasi-def minute data in HDZF orientation, provided by San Fernando, Spain (SFS) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "sfs/quasi-def/PT1M/diff",
    "title" : "Quasi-def minute data in DIFF orientation, provided by San Fernando, Spain (SFS) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "sfs/reported/PT1M/native",
    "title" : "Reported minute data in the coordinate system of measurement of the data ('native'), provided by San Fernando, Spain (SFS) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "sfs/best-avail/PT1M/native",
    "title" : "Best-avail minute data in the coordinate system of measurement of the data ('native'), provided by San Fernando, Spain (SFS) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "sfs/best-avail/PT1M/xyzf",
    "title" : "Best-avail minute data in XYZF orientation, provided by San Fernando, Spain (SFS) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "sfs/best-avail/PT1M/hdzf",
    "title" : "Best-avail minute data in HDZF orientation, provided by San Fernando, Spain (SFS) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "sfs/best-avail/PT1M/diff",
    "title" : "Best-avail minute data in DIFF orientation, provided by San Fernando, Spain (SFS) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "she/adjusted/PT1M/native",
    "title" : "Adjusted minute data in the coordinate system of measurement of the data ('native'), provided by Saint Helena, Saint Helena (SHE) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "she/adjusted/PT1M/xyzf",
    "title" : "Adjusted minute data in XYZF orientation, provided by Saint Helena, Saint Helena (SHE) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "she/adjusted/PT1M/hdzf",
    "title" : "Adjusted minute data in HDZF orientation, provided by Saint Helena, Saint Helena (SHE) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "she/adjusted/PT1M/diff",
    "title" : "Adjusted minute data in DIFF orientation, provided by Saint Helena, Saint Helena (SHE) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "she/definitive/PT1M/native",
    "title" : "Definitive minute data in the coordinate system of measurement of the data ('native'), provided by Saint Helena, Saint Helena (SHE) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "she/definitive/PT1M/xyzf",
    "title" : "Definitive minute data in XYZF orientation, provided by Saint Helena, Saint Helena (SHE) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "she/definitive/PT1M/hdzf",
    "title" : "Definitive minute data in HDZF orientation, provided by Saint Helena, Saint Helena (SHE) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "she/definitive/PT1M/diff",
    "title" : "Definitive minute data in DIFF orientation, provided by Saint Helena, Saint Helena (SHE) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "she/quasi-def/PT1M/native",
    "title" : "Quasi-def minute data in the coordinate system of measurement of the data ('native'), provided by Saint Helena, Saint Helena (SHE) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "she/quasi-def/PT1M/xyzf",
    "title" : "Quasi-def minute data in XYZF orientation, provided by Saint Helena, Saint Helena (SHE) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "she/quasi-def/PT1M/hdzf",
    "title" : "Quasi-def minute data in HDZF orientation, provided by Saint Helena, Saint Helena (SHE) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "she/quasi-def/PT1M/diff",
    "title" : "Quasi-def minute data in DIFF orientation, provided by Saint Helena, Saint Helena (SHE) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "she/reported/PT1M/native",
    "title" : "Reported minute data in the coordinate system of measurement of the data ('native'), provided by Saint Helena, Saint Helena (SHE) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "she/best-avail/PT1M/native",
    "title" : "Best-avail minute data in the coordinate system of measurement of the data ('native'), provided by Saint Helena, Saint Helena (SHE) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "she/best-avail/PT1M/xyzf",
    "title" : "Best-avail minute data in XYZF orientation, provided by Saint Helena, Saint Helena (SHE) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "she/best-avail/PT1M/hdzf",
    "title" : "Best-avail minute data in HDZF orientation, provided by Saint Helena, Saint Helena (SHE) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "she/best-avail/PT1M/diff",
    "title" : "Best-avail minute data in DIFF orientation, provided by Saint Helena, Saint Helena (SHE) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "she/quasi-def/PT1S/native",
    "title" : "Quasi-def second data in the coordinate system of measurement of the data ('native'), provided by Saint Helena, Saint Helena (SHE) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "she/quasi-def/PT1S/xyzf",
    "title" : "Quasi-def second data in XYZF orientation, provided by Saint Helena, Saint Helena (SHE) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "she/quasi-def/PT1S/hdzf",
    "title" : "Quasi-def second data in HDZF orientation, provided by Saint Helena, Saint Helena (SHE) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "she/quasi-def/PT1S/diff",
    "title" : "Quasi-def second data in DIFF orientation, provided by Saint Helena, Saint Helena (SHE) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "she/best-avail/PT1S/native",
    "title" : "Best-avail second data in the coordinate system of measurement of the data ('native'), provided by Saint Helena, Saint Helena (SHE) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "she/best-avail/PT1S/xyzf",
    "title" : "Best-avail second data in XYZF orientation, provided by Saint Helena, Saint Helena (SHE) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "she/best-avail/PT1S/hdzf",
    "title" : "Best-avail second data in HDZF orientation, provided by Saint Helena, Saint Helena (SHE) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "she/best-avail/PT1S/diff",
    "title" : "Best-avail second data in DIFF orientation, provided by Saint Helena, Saint Helena (SHE) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "shu/adjusted/PT1M/native",
    "title" : "Adjusted minute data in the coordinate system of measurement of the data ('native'), provided by Shumagin, USA (SHU) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "shu/adjusted/PT1M/xyzf",
    "title" : "Adjusted minute data in XYZF orientation, provided by Shumagin, USA (SHU) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "shu/adjusted/PT1M/hdzf",
    "title" : "Adjusted minute data in HDZF orientation, provided by Shumagin, USA (SHU) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "shu/adjusted/PT1M/diff",
    "title" : "Adjusted minute data in DIFF orientation, provided by Shumagin, USA (SHU) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "shu/definitive/PT1M/native",
    "title" : "Definitive minute data in the coordinate system of measurement of the data ('native'), provided by Shumagin, USA (SHU) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "shu/definitive/PT1M/xyzf",
    "title" : "Definitive minute data in XYZF orientation, provided by Shumagin, USA (SHU) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "shu/definitive/PT1M/hdzf",
    "title" : "Definitive minute data in HDZF orientation, provided by Shumagin, USA (SHU) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "shu/definitive/PT1M/diff",
    "title" : "Definitive minute data in DIFF orientation, provided by Shumagin, USA (SHU) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "shu/quasi-def/PT1M/native",
    "title" : "Quasi-def minute data in the coordinate system of measurement of the data ('native'), provided by Shumagin, USA (SHU) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "shu/quasi-def/PT1M/xyzf",
    "title" : "Quasi-def minute data in XYZF orientation, provided by Shumagin, USA (SHU) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "shu/quasi-def/PT1M/hdzf",
    "title" : "Quasi-def minute data in HDZF orientation, provided by Shumagin, USA (SHU) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "shu/quasi-def/PT1M/diff",
    "title" : "Quasi-def minute data in DIFF orientation, provided by Shumagin, USA (SHU) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "shu/reported/PT1M/native",
    "title" : "Reported minute data in the coordinate system of measurement of the data ('native'), provided by Shumagin, USA (SHU) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "shu/best-avail/PT1M/native",
    "title" : "Best-avail minute data in the coordinate system of measurement of the data ('native'), provided by Shumagin, USA (SHU) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "shu/best-avail/PT1M/xyzf",
    "title" : "Best-avail minute data in XYZF orientation, provided by Shumagin, USA (SHU) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "shu/best-avail/PT1M/hdzf",
    "title" : "Best-avail minute data in HDZF orientation, provided by Shumagin, USA (SHU) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "shu/best-avail/PT1M/diff",
    "title" : "Best-avail minute data in DIFF orientation, provided by Shumagin, USA (SHU) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "shu/adjusted/PT1S/native",
    "title" : "Adjusted second data in the coordinate system of measurement of the data ('native'), provided by Shumagin, USA (SHU) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "shu/adjusted/PT1S/xyzf",
    "title" : "Adjusted second data in XYZF orientation, provided by Shumagin, USA (SHU) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "shu/adjusted/PT1S/hdzf",
    "title" : "Adjusted second data in HDZF orientation, provided by Shumagin, USA (SHU) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "shu/adjusted/PT1S/diff",
    "title" : "Adjusted second data in DIFF orientation, provided by Shumagin, USA (SHU) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "shu/reported/PT1S/native",
    "title" : "Reported second data in the coordinate system of measurement of the data ('native'), provided by Shumagin, USA (SHU) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "shu/best-avail/PT1S/native",
    "title" : "Best-avail second data in the coordinate system of measurement of the data ('native'), provided by Shumagin, USA (SHU) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "shu/best-avail/PT1S/xyzf",
    "title" : "Best-avail second data in XYZF orientation, provided by Shumagin, USA (SHU) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "shu/best-avail/PT1S/hdzf",
    "title" : "Best-avail second data in HDZF orientation, provided by Shumagin, USA (SHU) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "shu/best-avail/PT1S/diff",
    "title" : "Best-avail second data in DIFF orientation, provided by Shumagin, USA (SHU) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "sit/adjusted/PT1M/native",
    "title" : "Adjusted minute data in the coordinate system of measurement of the data ('native'), provided by Sitka, USA (SIT) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "sit/adjusted/PT1M/xyzf",
    "title" : "Adjusted minute data in XYZF orientation, provided by Sitka, USA (SIT) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "sit/adjusted/PT1M/hdzf",
    "title" : "Adjusted minute data in HDZF orientation, provided by Sitka, USA (SIT) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "sit/adjusted/PT1M/diff",
    "title" : "Adjusted minute data in DIFF orientation, provided by Sitka, USA (SIT) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "sit/definitive/PT1M/native",
    "title" : "Definitive minute data in the coordinate system of measurement of the data ('native'), provided by Sitka, USA (SIT) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "sit/definitive/PT1M/xyzf",
    "title" : "Definitive minute data in XYZF orientation, provided by Sitka, USA (SIT) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "sit/definitive/PT1M/hdzf",
    "title" : "Definitive minute data in HDZF orientation, provided by Sitka, USA (SIT) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "sit/definitive/PT1M/diff",
    "title" : "Definitive minute data in DIFF orientation, provided by Sitka, USA (SIT) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "sit/quasi-def/PT1M/native",
    "title" : "Quasi-def minute data in the coordinate system of measurement of the data ('native'), provided by Sitka, USA (SIT) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "sit/quasi-def/PT1M/xyzf",
    "title" : "Quasi-def minute data in XYZF orientation, provided by Sitka, USA (SIT) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "sit/quasi-def/PT1M/hdzf",
    "title" : "Quasi-def minute data in HDZF orientation, provided by Sitka, USA (SIT) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "sit/quasi-def/PT1M/diff",
    "title" : "Quasi-def minute data in DIFF orientation, provided by Sitka, USA (SIT) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "sit/reported/PT1M/native",
    "title" : "Reported minute data in the coordinate system of measurement of the data ('native'), provided by Sitka, USA (SIT) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "sit/best-avail/PT1M/native",
    "title" : "Best-avail minute data in the coordinate system of measurement of the data ('native'), provided by Sitka, USA (SIT) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "sit/best-avail/PT1M/xyzf",
    "title" : "Best-avail minute data in XYZF orientation, provided by Sitka, USA (SIT) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "sit/best-avail/PT1M/hdzf",
    "title" : "Best-avail minute data in HDZF orientation, provided by Sitka, USA (SIT) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "sit/best-avail/PT1M/diff",
    "title" : "Best-avail minute data in DIFF orientation, provided by Sitka, USA (SIT) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "sit/adjusted/PT1S/native",
    "title" : "Adjusted second data in the coordinate system of measurement of the data ('native'), provided by Sitka, USA (SIT) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "sit/adjusted/PT1S/xyzf",
    "title" : "Adjusted second data in XYZF orientation, provided by Sitka, USA (SIT) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "sit/adjusted/PT1S/hdzf",
    "title" : "Adjusted second data in HDZF orientation, provided by Sitka, USA (SIT) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "sit/adjusted/PT1S/diff",
    "title" : "Adjusted second data in DIFF orientation, provided by Sitka, USA (SIT) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "sit/reported/PT1S/native",
    "title" : "Reported second data in the coordinate system of measurement of the data ('native'), provided by Sitka, USA (SIT) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "sit/best-avail/PT1S/native",
    "title" : "Best-avail second data in the coordinate system of measurement of the data ('native'), provided by Sitka, USA (SIT) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "sit/best-avail/PT1S/xyzf",
    "title" : "Best-avail second data in XYZF orientation, provided by Sitka, USA (SIT) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "sit/best-avail/PT1S/hdzf",
    "title" : "Best-avail second data in HDZF orientation, provided by Sitka, USA (SIT) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "sit/best-avail/PT1S/diff",
    "title" : "Best-avail second data in DIFF orientation, provided by Sitka, USA (SIT) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "sjg/adjusted/PT1M/native",
    "title" : "Adjusted minute data in the coordinate system of measurement of the data ('native'), provided by San Juan, USA (SJG) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "sjg/adjusted/PT1M/xyzf",
    "title" : "Adjusted minute data in XYZF orientation, provided by San Juan, USA (SJG) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "sjg/adjusted/PT1M/hdzf",
    "title" : "Adjusted minute data in HDZF orientation, provided by San Juan, USA (SJG) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "sjg/adjusted/PT1M/diff",
    "title" : "Adjusted minute data in DIFF orientation, provided by San Juan, USA (SJG) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "sjg/definitive/PT1M/native",
    "title" : "Definitive minute data in the coordinate system of measurement of the data ('native'), provided by San Juan, USA (SJG) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "sjg/definitive/PT1M/xyzf",
    "title" : "Definitive minute data in XYZF orientation, provided by San Juan, USA (SJG) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "sjg/definitive/PT1M/hdzf",
    "title" : "Definitive minute data in HDZF orientation, provided by San Juan, USA (SJG) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "sjg/definitive/PT1M/diff",
    "title" : "Definitive minute data in DIFF orientation, provided by San Juan, USA (SJG) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "sjg/quasi-def/PT1M/native",
    "title" : "Quasi-def minute data in the coordinate system of measurement of the data ('native'), provided by San Juan, USA (SJG) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "sjg/quasi-def/PT1M/xyzf",
    "title" : "Quasi-def minute data in XYZF orientation, provided by San Juan, USA (SJG) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "sjg/quasi-def/PT1M/hdzf",
    "title" : "Quasi-def minute data in HDZF orientation, provided by San Juan, USA (SJG) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "sjg/quasi-def/PT1M/diff",
    "title" : "Quasi-def minute data in DIFF orientation, provided by San Juan, USA (SJG) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "sjg/reported/PT1M/native",
    "title" : "Reported minute data in the coordinate system of measurement of the data ('native'), provided by San Juan, USA (SJG) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "sjg/best-avail/PT1M/native",
    "title" : "Best-avail minute data in the coordinate system of measurement of the data ('native'), provided by San Juan, USA (SJG) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "sjg/best-avail/PT1M/xyzf",
    "title" : "Best-avail minute data in XYZF orientation, provided by San Juan, USA (SJG) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "sjg/best-avail/PT1M/hdzf",
    "title" : "Best-avail minute data in HDZF orientation, provided by San Juan, USA (SJG) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "sjg/best-avail/PT1M/diff",
    "title" : "Best-avail minute data in DIFF orientation, provided by San Juan, USA (SJG) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "sjg/adjusted/PT1S/native",
    "title" : "Adjusted second data in the coordinate system of measurement of the data ('native'), provided by San Juan, USA (SJG) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "sjg/adjusted/PT1S/xyzf",
    "title" : "Adjusted second data in XYZF orientation, provided by San Juan, USA (SJG) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "sjg/adjusted/PT1S/hdzf",
    "title" : "Adjusted second data in HDZF orientation, provided by San Juan, USA (SJG) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "sjg/adjusted/PT1S/diff",
    "title" : "Adjusted second data in DIFF orientation, provided by San Juan, USA (SJG) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "sjg/reported/PT1S/native",
    "title" : "Reported second data in the coordinate system of measurement of the data ('native'), provided by San Juan, USA (SJG) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "sjg/best-avail/PT1S/native",
    "title" : "Best-avail second data in the coordinate system of measurement of the data ('native'), provided by San Juan, USA (SJG) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "sjg/best-avail/PT1S/xyzf",
    "title" : "Best-avail second data in XYZF orientation, provided by San Juan, USA (SJG) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "sjg/best-avail/PT1S/hdzf",
    "title" : "Best-avail second data in HDZF orientation, provided by San Juan, USA (SJG) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "sjg/best-avail/PT1S/diff",
    "title" : "Best-avail second data in DIFF orientation, provided by San Juan, USA (SJG) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "sod/adjusted/PT1M/native",
    "title" : "Adjusted minute data in the coordinate system of measurement of the data ('native'), provided by Sodankyla, Finland (SOD) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "sod/adjusted/PT1M/xyzf",
    "title" : "Adjusted minute data in XYZF orientation, provided by Sodankyla, Finland (SOD) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "sod/adjusted/PT1M/hdzf",
    "title" : "Adjusted minute data in HDZF orientation, provided by Sodankyla, Finland (SOD) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "sod/adjusted/PT1M/diff",
    "title" : "Adjusted minute data in DIFF orientation, provided by Sodankyla, Finland (SOD) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "sod/definitive/PT1M/native",
    "title" : "Definitive minute data in the coordinate system of measurement of the data ('native'), provided by Sodankyla, Finland (SOD) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "sod/definitive/PT1M/xyzf",
    "title" : "Definitive minute data in XYZF orientation, provided by Sodankyla, Finland (SOD) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "sod/definitive/PT1M/hdzf",
    "title" : "Definitive minute data in HDZF orientation, provided by Sodankyla, Finland (SOD) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "sod/definitive/PT1M/diff",
    "title" : "Definitive minute data in DIFF orientation, provided by Sodankyla, Finland (SOD) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "sod/reported/PT1M/native",
    "title" : "Reported minute data in the coordinate system of measurement of the data ('native'), provided by Sodankyla, Finland (SOD) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "sod/best-avail/PT1M/native",
    "title" : "Best-avail minute data in the coordinate system of measurement of the data ('native'), provided by Sodankyla, Finland (SOD) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "sod/best-avail/PT1M/xyzf",
    "title" : "Best-avail minute data in XYZF orientation, provided by Sodankyla, Finland (SOD) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "sod/best-avail/PT1M/hdzf",
    "title" : "Best-avail minute data in HDZF orientation, provided by Sodankyla, Finland (SOD) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "sod/best-avail/PT1M/diff",
    "title" : "Best-avail minute data in DIFF orientation, provided by Sodankyla, Finland (SOD) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "spg/definitive/PT1M/native",
    "title" : "Definitive minute data in the coordinate system of measurement of the data ('native'), provided by Saint Petersburg, Russia (SPG) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "spg/definitive/PT1M/xyzf",
    "title" : "Definitive minute data in XYZF orientation, provided by Saint Petersburg, Russia (SPG) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "spg/definitive/PT1M/hdzf",
    "title" : "Definitive minute data in HDZF orientation, provided by Saint Petersburg, Russia (SPG) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "spg/definitive/PT1M/diff",
    "title" : "Definitive minute data in DIFF orientation, provided by Saint Petersburg, Russia (SPG) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "spg/quasi-def/PT1M/native",
    "title" : "Quasi-def minute data in the coordinate system of measurement of the data ('native'), provided by Saint Petersburg, Russia (SPG) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "spg/quasi-def/PT1M/xyzf",
    "title" : "Quasi-def minute data in XYZF orientation, provided by Saint Petersburg, Russia (SPG) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "spg/quasi-def/PT1M/hdzf",
    "title" : "Quasi-def minute data in HDZF orientation, provided by Saint Petersburg, Russia (SPG) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "spg/quasi-def/PT1M/diff",
    "title" : "Quasi-def minute data in DIFF orientation, provided by Saint Petersburg, Russia (SPG) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "spg/reported/PT1M/native",
    "title" : "Reported minute data in the coordinate system of measurement of the data ('native'), provided by Saint Petersburg, Russia (SPG) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "spg/best-avail/PT1M/native",
    "title" : "Best-avail minute data in the coordinate system of measurement of the data ('native'), provided by Saint Petersburg, Russia (SPG) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "spg/best-avail/PT1M/xyzf",
    "title" : "Best-avail minute data in XYZF orientation, provided by Saint Petersburg, Russia (SPG) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "spg/best-avail/PT1M/hdzf",
    "title" : "Best-avail minute data in HDZF orientation, provided by Saint Petersburg, Russia (SPG) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "spg/best-avail/PT1M/diff",
    "title" : "Best-avail minute data in DIFF orientation, provided by Saint Petersburg, Russia (SPG) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "spt/adjusted/PT1M/native",
    "title" : "Adjusted minute data in the coordinate system of measurement of the data ('native'), provided by San Pablo-Toledo, Spain (SPT) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "spt/adjusted/PT1M/xyzf",
    "title" : "Adjusted minute data in XYZF orientation, provided by San Pablo-Toledo, Spain (SPT) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "spt/adjusted/PT1M/hdzf",
    "title" : "Adjusted minute data in HDZF orientation, provided by San Pablo-Toledo, Spain (SPT) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "spt/adjusted/PT1M/diff",
    "title" : "Adjusted minute data in DIFF orientation, provided by San Pablo-Toledo, Spain (SPT) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "spt/definitive/PT1M/native",
    "title" : "Definitive minute data in the coordinate system of measurement of the data ('native'), provided by San Pablo-Toledo, Spain (SPT) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "spt/definitive/PT1M/xyzf",
    "title" : "Definitive minute data in XYZF orientation, provided by San Pablo-Toledo, Spain (SPT) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "spt/definitive/PT1M/hdzf",
    "title" : "Definitive minute data in HDZF orientation, provided by San Pablo-Toledo, Spain (SPT) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "spt/definitive/PT1M/diff",
    "title" : "Definitive minute data in DIFF orientation, provided by San Pablo-Toledo, Spain (SPT) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "spt/quasi-def/PT1M/native",
    "title" : "Quasi-def minute data in the coordinate system of measurement of the data ('native'), provided by San Pablo-Toledo, Spain (SPT) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "spt/quasi-def/PT1M/xyzf",
    "title" : "Quasi-def minute data in XYZF orientation, provided by San Pablo-Toledo, Spain (SPT) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "spt/quasi-def/PT1M/hdzf",
    "title" : "Quasi-def minute data in HDZF orientation, provided by San Pablo-Toledo, Spain (SPT) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "spt/quasi-def/PT1M/diff",
    "title" : "Quasi-def minute data in DIFF orientation, provided by San Pablo-Toledo, Spain (SPT) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "spt/reported/PT1M/native",
    "title" : "Reported minute data in the coordinate system of measurement of the data ('native'), provided by San Pablo-Toledo, Spain (SPT) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "spt/best-avail/PT1M/native",
    "title" : "Best-avail minute data in the coordinate system of measurement of the data ('native'), provided by San Pablo-Toledo, Spain (SPT) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "spt/best-avail/PT1M/xyzf",
    "title" : "Best-avail minute data in XYZF orientation, provided by San Pablo-Toledo, Spain (SPT) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "spt/best-avail/PT1M/hdzf",
    "title" : "Best-avail minute data in HDZF orientation, provided by San Pablo-Toledo, Spain (SPT) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "spt/best-avail/PT1M/diff",
    "title" : "Best-avail minute data in DIFF orientation, provided by San Pablo-Toledo, Spain (SPT) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "spt/reported/PT1S/native",
    "title" : "Reported second data in the coordinate system of measurement of the data ('native'), provided by San Pablo-Toledo, Spain (SPT) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "spt/best-avail/PT1S/native",
    "title" : "Best-avail second data in the coordinate system of measurement of the data ('native'), provided by San Pablo-Toledo, Spain (SPT) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "spt/best-avail/PT1S/xyzf",
    "title" : "Best-avail second data in XYZF orientation, provided by San Pablo-Toledo, Spain (SPT) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "spt/best-avail/PT1S/hdzf",
    "title" : "Best-avail second data in HDZF orientation, provided by San Pablo-Toledo, Spain (SPT) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "spt/best-avail/PT1S/diff",
    "title" : "Best-avail second data in DIFF orientation, provided by San Pablo-Toledo, Spain (SPT) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "stj/definitive/PT1M/native",
    "title" : "Definitive minute data in the coordinate system of measurement of the data ('native'), provided by St John's, Canada (STJ) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "stj/definitive/PT1M/xyzf",
    "title" : "Definitive minute data in XYZF orientation, provided by St John's, Canada (STJ) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "stj/definitive/PT1M/hdzf",
    "title" : "Definitive minute data in HDZF orientation, provided by St John's, Canada (STJ) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "stj/definitive/PT1M/diff",
    "title" : "Definitive minute data in DIFF orientation, provided by St John's, Canada (STJ) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "stj/reported/PT1M/native",
    "title" : "Reported minute data in the coordinate system of measurement of the data ('native'), provided by St John's, Canada (STJ) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "stj/best-avail/PT1M/native",
    "title" : "Best-avail minute data in the coordinate system of measurement of the data ('native'), provided by St John's, Canada (STJ) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "stj/best-avail/PT1M/xyzf",
    "title" : "Best-avail minute data in XYZF orientation, provided by St John's, Canada (STJ) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "stj/best-avail/PT1M/hdzf",
    "title" : "Best-avail minute data in HDZF orientation, provided by St John's, Canada (STJ) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "stj/best-avail/PT1M/diff",
    "title" : "Best-avail minute data in DIFF orientation, provided by St John's, Canada (STJ) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "stj/reported/PT1S/native",
    "title" : "Reported second data in the coordinate system of measurement of the data ('native'), provided by St John's, Canada (STJ) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "stj/best-avail/PT1S/native",
    "title" : "Best-avail second data in the coordinate system of measurement of the data ('native'), provided by St John's, Canada (STJ) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "stj/best-avail/PT1S/xyzf",
    "title" : "Best-avail second data in XYZF orientation, provided by St John's, Canada (STJ) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "stj/best-avail/PT1S/hdzf",
    "title" : "Best-avail second data in HDZF orientation, provided by St John's, Canada (STJ) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "stj/best-avail/PT1S/diff",
    "title" : "Best-avail second data in DIFF orientation, provided by St John's, Canada (STJ) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "stt/adjusted/PT1M/native",
    "title" : "Adjusted minute data in the coordinate system of measurement of the data ('native'), provided by Sao Teotonio, Portugal (STT) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "stt/adjusted/PT1M/xyzf",
    "title" : "Adjusted minute data in XYZF orientation, provided by Sao Teotonio, Portugal (STT) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "stt/adjusted/PT1M/hdzf",
    "title" : "Adjusted minute data in HDZF orientation, provided by Sao Teotonio, Portugal (STT) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "stt/adjusted/PT1M/diff",
    "title" : "Adjusted minute data in DIFF orientation, provided by Sao Teotonio, Portugal (STT) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "stt/definitive/PT1M/native",
    "title" : "Definitive minute data in the coordinate system of measurement of the data ('native'), provided by Sao Teotonio, Portugal (STT) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "stt/definitive/PT1M/xyzf",
    "title" : "Definitive minute data in XYZF orientation, provided by Sao Teotonio, Portugal (STT) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "stt/definitive/PT1M/hdzf",
    "title" : "Definitive minute data in HDZF orientation, provided by Sao Teotonio, Portugal (STT) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "stt/definitive/PT1M/diff",
    "title" : "Definitive minute data in DIFF orientation, provided by Sao Teotonio, Portugal (STT) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "stt/quasi-def/PT1M/native",
    "title" : "Quasi-def minute data in the coordinate system of measurement of the data ('native'), provided by Sao Teotonio, Portugal (STT) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "stt/quasi-def/PT1M/xyzf",
    "title" : "Quasi-def minute data in XYZF orientation, provided by Sao Teotonio, Portugal (STT) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "stt/quasi-def/PT1M/hdzf",
    "title" : "Quasi-def minute data in HDZF orientation, provided by Sao Teotonio, Portugal (STT) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "stt/quasi-def/PT1M/diff",
    "title" : "Quasi-def minute data in DIFF orientation, provided by Sao Teotonio, Portugal (STT) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "stt/reported/PT1M/native",
    "title" : "Reported minute data in the coordinate system of measurement of the data ('native'), provided by Sao Teotonio, Portugal (STT) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "stt/best-avail/PT1M/native",
    "title" : "Best-avail minute data in the coordinate system of measurement of the data ('native'), provided by Sao Teotonio, Portugal (STT) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "stt/best-avail/PT1M/xyzf",
    "title" : "Best-avail minute data in XYZF orientation, provided by Sao Teotonio, Portugal (STT) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "stt/best-avail/PT1M/hdzf",
    "title" : "Best-avail minute data in HDZF orientation, provided by Sao Teotonio, Portugal (STT) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "stt/best-avail/PT1M/diff",
    "title" : "Best-avail minute data in DIFF orientation, provided by Sao Teotonio, Portugal (STT) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "stt/quasi-def/PT1S/native",
    "title" : "Quasi-def second data in the coordinate system of measurement of the data ('native'), provided by Sao Teotonio, Portugal (STT) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "stt/quasi-def/PT1S/xyzf",
    "title" : "Quasi-def second data in XYZF orientation, provided by Sao Teotonio, Portugal (STT) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "stt/quasi-def/PT1S/hdzf",
    "title" : "Quasi-def second data in HDZF orientation, provided by Sao Teotonio, Portugal (STT) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "stt/quasi-def/PT1S/diff",
    "title" : "Quasi-def second data in DIFF orientation, provided by Sao Teotonio, Portugal (STT) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "stt/best-avail/PT1S/native",
    "title" : "Best-avail second data in the coordinate system of measurement of the data ('native'), provided by Sao Teotonio, Portugal (STT) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "stt/best-avail/PT1S/xyzf",
    "title" : "Best-avail second data in XYZF orientation, provided by Sao Teotonio, Portugal (STT) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "stt/best-avail/PT1S/hdzf",
    "title" : "Best-avail second data in HDZF orientation, provided by Sao Teotonio, Portugal (STT) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "stt/best-avail/PT1S/diff",
    "title" : "Best-avail second data in DIFF orientation, provided by Sao Teotonio, Portugal (STT) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "sua/adjusted/PT1M/native",
    "title" : "Adjusted minute data in the coordinate system of measurement of the data ('native'), provided by Surlari, Romania (SUA) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "sua/adjusted/PT1M/xyzf",
    "title" : "Adjusted minute data in XYZF orientation, provided by Surlari, Romania (SUA) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "sua/adjusted/PT1M/hdzf",
    "title" : "Adjusted minute data in HDZF orientation, provided by Surlari, Romania (SUA) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "sua/adjusted/PT1M/diff",
    "title" : "Adjusted minute data in DIFF orientation, provided by Surlari, Romania (SUA) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "sua/definitive/PT1M/native",
    "title" : "Definitive minute data in the coordinate system of measurement of the data ('native'), provided by Surlari, Romania (SUA) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "sua/definitive/PT1M/xyzf",
    "title" : "Definitive minute data in XYZF orientation, provided by Surlari, Romania (SUA) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "sua/definitive/PT1M/hdzf",
    "title" : "Definitive minute data in HDZF orientation, provided by Surlari, Romania (SUA) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "sua/definitive/PT1M/diff",
    "title" : "Definitive minute data in DIFF orientation, provided by Surlari, Romania (SUA) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "sua/quasi-def/PT1M/native",
    "title" : "Quasi-def minute data in the coordinate system of measurement of the data ('native'), provided by Surlari, Romania (SUA) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "sua/quasi-def/PT1M/xyzf",
    "title" : "Quasi-def minute data in XYZF orientation, provided by Surlari, Romania (SUA) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "sua/quasi-def/PT1M/hdzf",
    "title" : "Quasi-def minute data in HDZF orientation, provided by Surlari, Romania (SUA) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "sua/quasi-def/PT1M/diff",
    "title" : "Quasi-def minute data in DIFF orientation, provided by Surlari, Romania (SUA) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "sua/reported/PT1M/native",
    "title" : "Reported minute data in the coordinate system of measurement of the data ('native'), provided by Surlari, Romania (SUA) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "sua/best-avail/PT1M/native",
    "title" : "Best-avail minute data in the coordinate system of measurement of the data ('native'), provided by Surlari, Romania (SUA) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "sua/best-avail/PT1M/xyzf",
    "title" : "Best-avail minute data in XYZF orientation, provided by Surlari, Romania (SUA) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "sua/best-avail/PT1M/hdzf",
    "title" : "Best-avail minute data in HDZF orientation, provided by Surlari, Romania (SUA) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "sua/best-avail/PT1M/diff",
    "title" : "Best-avail minute data in DIFF orientation, provided by Surlari, Romania (SUA) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "tam/definitive/PT1M/native",
    "title" : "Definitive minute data in the coordinate system of measurement of the data ('native'), provided by Tamanrasset, Algeria (TAM) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "tam/definitive/PT1M/xyzf",
    "title" : "Definitive minute data in XYZF orientation, provided by Tamanrasset, Algeria (TAM) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "tam/definitive/PT1M/hdzf",
    "title" : "Definitive minute data in HDZF orientation, provided by Tamanrasset, Algeria (TAM) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "tam/definitive/PT1M/diff",
    "title" : "Definitive minute data in DIFF orientation, provided by Tamanrasset, Algeria (TAM) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "tam/quasi-def/PT1M/native",
    "title" : "Quasi-def minute data in the coordinate system of measurement of the data ('native'), provided by Tamanrasset, Algeria (TAM) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "tam/quasi-def/PT1M/xyzf",
    "title" : "Quasi-def minute data in XYZF orientation, provided by Tamanrasset, Algeria (TAM) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "tam/quasi-def/PT1M/hdzf",
    "title" : "Quasi-def minute data in HDZF orientation, provided by Tamanrasset, Algeria (TAM) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "tam/quasi-def/PT1M/diff",
    "title" : "Quasi-def minute data in DIFF orientation, provided by Tamanrasset, Algeria (TAM) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "tam/reported/PT1M/native",
    "title" : "Reported minute data in the coordinate system of measurement of the data ('native'), provided by Tamanrasset, Algeria (TAM) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "tam/best-avail/PT1M/native",
    "title" : "Best-avail minute data in the coordinate system of measurement of the data ('native'), provided by Tamanrasset, Algeria (TAM) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "tam/best-avail/PT1M/xyzf",
    "title" : "Best-avail minute data in XYZF orientation, provided by Tamanrasset, Algeria (TAM) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "tam/best-avail/PT1M/hdzf",
    "title" : "Best-avail minute data in HDZF orientation, provided by Tamanrasset, Algeria (TAM) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "tam/best-avail/PT1M/diff",
    "title" : "Best-avail minute data in DIFF orientation, provided by Tamanrasset, Algeria (TAM) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "tam/quasi-def/PT1S/native",
    "title" : "Quasi-def second data in the coordinate system of measurement of the data ('native'), provided by Tamanrasset, Algeria (TAM) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "tam/quasi-def/PT1S/xyzf",
    "title" : "Quasi-def second data in XYZF orientation, provided by Tamanrasset, Algeria (TAM) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "tam/quasi-def/PT1S/hdzf",
    "title" : "Quasi-def second data in HDZF orientation, provided by Tamanrasset, Algeria (TAM) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "tam/quasi-def/PT1S/diff",
    "title" : "Quasi-def second data in DIFF orientation, provided by Tamanrasset, Algeria (TAM) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "tam/reported/PT1S/native",
    "title" : "Reported second data in the coordinate system of measurement of the data ('native'), provided by Tamanrasset, Algeria (TAM) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "tam/best-avail/PT1S/native",
    "title" : "Best-avail second data in the coordinate system of measurement of the data ('native'), provided by Tamanrasset, Algeria (TAM) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "tam/best-avail/PT1S/xyzf",
    "title" : "Best-avail second data in XYZF orientation, provided by Tamanrasset, Algeria (TAM) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "tam/best-avail/PT1S/hdzf",
    "title" : "Best-avail second data in HDZF orientation, provided by Tamanrasset, Algeria (TAM) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "tam/best-avail/PT1S/diff",
    "title" : "Best-avail second data in DIFF orientation, provided by Tamanrasset, Algeria (TAM) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "tan/definitive/PT1M/native",
    "title" : "Definitive minute data in the coordinate system of measurement of the data ('native'), provided by Antananarivo, Madagascar (TAN) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "tan/definitive/PT1M/xyzf",
    "title" : "Definitive minute data in XYZF orientation, provided by Antananarivo, Madagascar (TAN) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "tan/definitive/PT1M/hdzf",
    "title" : "Definitive minute data in HDZF orientation, provided by Antananarivo, Madagascar (TAN) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "tan/definitive/PT1M/diff",
    "title" : "Definitive minute data in DIFF orientation, provided by Antananarivo, Madagascar (TAN) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "tan/reported/PT1M/native",
    "title" : "Reported minute data in the coordinate system of measurement of the data ('native'), provided by Antananarivo, Madagascar (TAN) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "tan/best-avail/PT1M/native",
    "title" : "Best-avail minute data in the coordinate system of measurement of the data ('native'), provided by Antananarivo, Madagascar (TAN) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "tan/best-avail/PT1M/xyzf",
    "title" : "Best-avail minute data in XYZF orientation, provided by Antananarivo, Madagascar (TAN) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "tan/best-avail/PT1M/hdzf",
    "title" : "Best-avail minute data in HDZF orientation, provided by Antananarivo, Madagascar (TAN) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "tan/best-avail/PT1M/diff",
    "title" : "Best-avail minute data in DIFF orientation, provided by Antananarivo, Madagascar (TAN) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "tdc/adjusted/PT1M/native",
    "title" : "Adjusted minute data in the coordinate system of measurement of the data ('native'), provided by Tristan da Cunha, Tristan da Cunha (TDC) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "tdc/adjusted/PT1M/xyzf",
    "title" : "Adjusted minute data in XYZF orientation, provided by Tristan da Cunha, Tristan da Cunha (TDC) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "tdc/adjusted/PT1M/hdzf",
    "title" : "Adjusted minute data in HDZF orientation, provided by Tristan da Cunha, Tristan da Cunha (TDC) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "tdc/adjusted/PT1M/diff",
    "title" : "Adjusted minute data in DIFF orientation, provided by Tristan da Cunha, Tristan da Cunha (TDC) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "tdc/definitive/PT1M/native",
    "title" : "Definitive minute data in the coordinate system of measurement of the data ('native'), provided by Tristan da Cunha, Tristan da Cunha (TDC) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "tdc/definitive/PT1M/xyzf",
    "title" : "Definitive minute data in XYZF orientation, provided by Tristan da Cunha, Tristan da Cunha (TDC) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "tdc/definitive/PT1M/hdzf",
    "title" : "Definitive minute data in HDZF orientation, provided by Tristan da Cunha, Tristan da Cunha (TDC) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "tdc/definitive/PT1M/diff",
    "title" : "Definitive minute data in DIFF orientation, provided by Tristan da Cunha, Tristan da Cunha (TDC) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "tdc/quasi-def/PT1M/native",
    "title" : "Quasi-def minute data in the coordinate system of measurement of the data ('native'), provided by Tristan da Cunha, Tristan da Cunha (TDC) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "tdc/quasi-def/PT1M/xyzf",
    "title" : "Quasi-def minute data in XYZF orientation, provided by Tristan da Cunha, Tristan da Cunha (TDC) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "tdc/quasi-def/PT1M/hdzf",
    "title" : "Quasi-def minute data in HDZF orientation, provided by Tristan da Cunha, Tristan da Cunha (TDC) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "tdc/quasi-def/PT1M/diff",
    "title" : "Quasi-def minute data in DIFF orientation, provided by Tristan da Cunha, Tristan da Cunha (TDC) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "tdc/reported/PT1M/native",
    "title" : "Reported minute data in the coordinate system of measurement of the data ('native'), provided by Tristan da Cunha, Tristan da Cunha (TDC) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "tdc/best-avail/PT1M/native",
    "title" : "Best-avail minute data in the coordinate system of measurement of the data ('native'), provided by Tristan da Cunha, Tristan da Cunha (TDC) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "tdc/best-avail/PT1M/xyzf",
    "title" : "Best-avail minute data in XYZF orientation, provided by Tristan da Cunha, Tristan da Cunha (TDC) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "tdc/best-avail/PT1M/hdzf",
    "title" : "Best-avail minute data in HDZF orientation, provided by Tristan da Cunha, Tristan da Cunha (TDC) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "tdc/best-avail/PT1M/diff",
    "title" : "Best-avail minute data in DIFF orientation, provided by Tristan da Cunha, Tristan da Cunha (TDC) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "tdc/quasi-def/PT1S/native",
    "title" : "Quasi-def second data in the coordinate system of measurement of the data ('native'), provided by Tristan da Cunha, Tristan da Cunha (TDC) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "tdc/quasi-def/PT1S/xyzf",
    "title" : "Quasi-def second data in XYZF orientation, provided by Tristan da Cunha, Tristan da Cunha (TDC) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "tdc/quasi-def/PT1S/hdzf",
    "title" : "Quasi-def second data in HDZF orientation, provided by Tristan da Cunha, Tristan da Cunha (TDC) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "tdc/quasi-def/PT1S/diff",
    "title" : "Quasi-def second data in DIFF orientation, provided by Tristan da Cunha, Tristan da Cunha (TDC) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "tdc/best-avail/PT1S/native",
    "title" : "Best-avail second data in the coordinate system of measurement of the data ('native'), provided by Tristan da Cunha, Tristan da Cunha (TDC) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "tdc/best-avail/PT1S/xyzf",
    "title" : "Best-avail second data in XYZF orientation, provided by Tristan da Cunha, Tristan da Cunha (TDC) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "tdc/best-avail/PT1S/hdzf",
    "title" : "Best-avail second data in HDZF orientation, provided by Tristan da Cunha, Tristan da Cunha (TDC) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "tdc/best-avail/PT1S/diff",
    "title" : "Best-avail second data in DIFF orientation, provided by Tristan da Cunha, Tristan da Cunha (TDC) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "thl/adjusted/PT1M/native",
    "title" : "Adjusted minute data in the coordinate system of measurement of the data ('native'), provided by Qaanaaq (Thule), Greenland (THL) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "thl/adjusted/PT1M/xyzf",
    "title" : "Adjusted minute data in XYZF orientation, provided by Qaanaaq (Thule), Greenland (THL) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "thl/adjusted/PT1M/hdzf",
    "title" : "Adjusted minute data in HDZF orientation, provided by Qaanaaq (Thule), Greenland (THL) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "thl/adjusted/PT1M/diff",
    "title" : "Adjusted minute data in DIFF orientation, provided by Qaanaaq (Thule), Greenland (THL) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "thl/definitive/PT1M/native",
    "title" : "Definitive minute data in the coordinate system of measurement of the data ('native'), provided by Qaanaaq (Thule), Greenland (THL) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "thl/definitive/PT1M/xyzf",
    "title" : "Definitive minute data in XYZF orientation, provided by Qaanaaq (Thule), Greenland (THL) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "thl/definitive/PT1M/hdzf",
    "title" : "Definitive minute data in HDZF orientation, provided by Qaanaaq (Thule), Greenland (THL) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "thl/definitive/PT1M/diff",
    "title" : "Definitive minute data in DIFF orientation, provided by Qaanaaq (Thule), Greenland (THL) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "thl/quasi-def/PT1M/native",
    "title" : "Quasi-def minute data in the coordinate system of measurement of the data ('native'), provided by Qaanaaq (Thule), Greenland (THL) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "thl/quasi-def/PT1M/xyzf",
    "title" : "Quasi-def minute data in XYZF orientation, provided by Qaanaaq (Thule), Greenland (THL) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "thl/quasi-def/PT1M/hdzf",
    "title" : "Quasi-def minute data in HDZF orientation, provided by Qaanaaq (Thule), Greenland (THL) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "thl/quasi-def/PT1M/diff",
    "title" : "Quasi-def minute data in DIFF orientation, provided by Qaanaaq (Thule), Greenland (THL) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "thl/reported/PT1M/native",
    "title" : "Reported minute data in the coordinate system of measurement of the data ('native'), provided by Qaanaaq (Thule), Greenland (THL) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "thl/best-avail/PT1M/native",
    "title" : "Best-avail minute data in the coordinate system of measurement of the data ('native'), provided by Qaanaaq (Thule), Greenland (THL) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "thl/best-avail/PT1M/xyzf",
    "title" : "Best-avail minute data in XYZF orientation, provided by Qaanaaq (Thule), Greenland (THL) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "thl/best-avail/PT1M/hdzf",
    "title" : "Best-avail minute data in HDZF orientation, provided by Qaanaaq (Thule), Greenland (THL) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "thl/best-avail/PT1M/diff",
    "title" : "Best-avail minute data in DIFF orientation, provided by Qaanaaq (Thule), Greenland (THL) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "thy/adjusted/PT1M/native",
    "title" : "Adjusted minute data in the coordinate system of measurement of the data ('native'), provided by Tihany, Hungary (THY) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "thy/adjusted/PT1M/xyzf",
    "title" : "Adjusted minute data in XYZF orientation, provided by Tihany, Hungary (THY) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "thy/adjusted/PT1M/hdzf",
    "title" : "Adjusted minute data in HDZF orientation, provided by Tihany, Hungary (THY) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "thy/adjusted/PT1M/diff",
    "title" : "Adjusted minute data in DIFF orientation, provided by Tihany, Hungary (THY) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "thy/definitive/PT1M/native",
    "title" : "Definitive minute data in the coordinate system of measurement of the data ('native'), provided by Tihany, Hungary (THY) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "thy/definitive/PT1M/xyzf",
    "title" : "Definitive minute data in XYZF orientation, provided by Tihany, Hungary (THY) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "thy/definitive/PT1M/hdzf",
    "title" : "Definitive minute data in HDZF orientation, provided by Tihany, Hungary (THY) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "thy/definitive/PT1M/diff",
    "title" : "Definitive minute data in DIFF orientation, provided by Tihany, Hungary (THY) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "thy/quasi-def/PT1M/native",
    "title" : "Quasi-def minute data in the coordinate system of measurement of the data ('native'), provided by Tihany, Hungary (THY) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "thy/quasi-def/PT1M/xyzf",
    "title" : "Quasi-def minute data in XYZF orientation, provided by Tihany, Hungary (THY) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "thy/quasi-def/PT1M/hdzf",
    "title" : "Quasi-def minute data in HDZF orientation, provided by Tihany, Hungary (THY) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "thy/quasi-def/PT1M/diff",
    "title" : "Quasi-def minute data in DIFF orientation, provided by Tihany, Hungary (THY) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "thy/reported/PT1M/native",
    "title" : "Reported minute data in the coordinate system of measurement of the data ('native'), provided by Tihany, Hungary (THY) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "thy/best-avail/PT1M/native",
    "title" : "Best-avail minute data in the coordinate system of measurement of the data ('native'), provided by Tihany, Hungary (THY) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "thy/best-avail/PT1M/xyzf",
    "title" : "Best-avail minute data in XYZF orientation, provided by Tihany, Hungary (THY) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "thy/best-avail/PT1M/hdzf",
    "title" : "Best-avail minute data in HDZF orientation, provided by Tihany, Hungary (THY) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "thy/best-avail/PT1M/diff",
    "title" : "Best-avail minute data in DIFF orientation, provided by Tihany, Hungary (THY) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "thy/quasi-def/PT1S/native",
    "title" : "Quasi-def second data in the coordinate system of measurement of the data ('native'), provided by Tihany, Hungary (THY) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "thy/quasi-def/PT1S/xyzf",
    "title" : "Quasi-def second data in XYZF orientation, provided by Tihany, Hungary (THY) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "thy/quasi-def/PT1S/hdzf",
    "title" : "Quasi-def second data in HDZF orientation, provided by Tihany, Hungary (THY) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "thy/quasi-def/PT1S/diff",
    "title" : "Quasi-def second data in DIFF orientation, provided by Tihany, Hungary (THY) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "thy/best-avail/PT1S/native",
    "title" : "Best-avail second data in the coordinate system of measurement of the data ('native'), provided by Tihany, Hungary (THY) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "thy/best-avail/PT1S/xyzf",
    "title" : "Best-avail second data in XYZF orientation, provided by Tihany, Hungary (THY) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "thy/best-avail/PT1S/hdzf",
    "title" : "Best-avail second data in HDZF orientation, provided by Tihany, Hungary (THY) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "thy/best-avail/PT1S/diff",
    "title" : "Best-avail second data in DIFF orientation, provided by Tihany, Hungary (THY) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "tik/definitive/PT1M/native",
    "title" : "Definitive minute data in the coordinate system of measurement of the data ('native'), provided by Tiksi, Russia (TIK) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "tik/definitive/PT1M/xyzf",
    "title" : "Definitive minute data in XYZF orientation, provided by Tiksi, Russia (TIK) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "tik/definitive/PT1M/hdzf",
    "title" : "Definitive minute data in HDZF orientation, provided by Tiksi, Russia (TIK) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "tik/definitive/PT1M/diff",
    "title" : "Definitive minute data in DIFF orientation, provided by Tiksi, Russia (TIK) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "tik/reported/PT1M/native",
    "title" : "Reported minute data in the coordinate system of measurement of the data ('native'), provided by Tiksi, Russia (TIK) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "tik/best-avail/PT1M/native",
    "title" : "Best-avail minute data in the coordinate system of measurement of the data ('native'), provided by Tiksi, Russia (TIK) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "tik/best-avail/PT1M/xyzf",
    "title" : "Best-avail minute data in XYZF orientation, provided by Tiksi, Russia (TIK) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "tik/best-avail/PT1M/hdzf",
    "title" : "Best-avail minute data in HDZF orientation, provided by Tiksi, Russia (TIK) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "tik/best-avail/PT1M/diff",
    "title" : "Best-avail minute data in DIFF orientation, provided by Tiksi, Russia (TIK) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "tsu/adjusted/PT1M/native",
    "title" : "Adjusted minute data in the coordinate system of measurement of the data ('native'), provided by Tsumeb, South Africa (TSU) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "tsu/adjusted/PT1M/xyzf",
    "title" : "Adjusted minute data in XYZF orientation, provided by Tsumeb, South Africa (TSU) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "tsu/adjusted/PT1M/hdzf",
    "title" : "Adjusted minute data in HDZF orientation, provided by Tsumeb, South Africa (TSU) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "tsu/adjusted/PT1M/diff",
    "title" : "Adjusted minute data in DIFF orientation, provided by Tsumeb, South Africa (TSU) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "tsu/definitive/PT1M/native",
    "title" : "Definitive minute data in the coordinate system of measurement of the data ('native'), provided by Tsumeb, South Africa (TSU) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "tsu/definitive/PT1M/xyzf",
    "title" : "Definitive minute data in XYZF orientation, provided by Tsumeb, South Africa (TSU) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "tsu/definitive/PT1M/hdzf",
    "title" : "Definitive minute data in HDZF orientation, provided by Tsumeb, South Africa (TSU) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "tsu/definitive/PT1M/diff",
    "title" : "Definitive minute data in DIFF orientation, provided by Tsumeb, South Africa (TSU) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "tsu/reported/PT1M/native",
    "title" : "Reported minute data in the coordinate system of measurement of the data ('native'), provided by Tsumeb, South Africa (TSU) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "tsu/best-avail/PT1M/native",
    "title" : "Best-avail minute data in the coordinate system of measurement of the data ('native'), provided by Tsumeb, South Africa (TSU) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "tsu/best-avail/PT1M/xyzf",
    "title" : "Best-avail minute data in XYZF orientation, provided by Tsumeb, South Africa (TSU) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "tsu/best-avail/PT1M/hdzf",
    "title" : "Best-avail minute data in HDZF orientation, provided by Tsumeb, South Africa (TSU) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "tsu/best-avail/PT1M/diff",
    "title" : "Best-avail minute data in DIFF orientation, provided by Tsumeb, South Africa (TSU) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "tsu/reported/PT1S/native",
    "title" : "Reported second data in the coordinate system of measurement of the data ('native'), provided by Tsumeb, South Africa (TSU) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "tsu/best-avail/PT1S/native",
    "title" : "Best-avail second data in the coordinate system of measurement of the data ('native'), provided by Tsumeb, South Africa (TSU) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "tsu/best-avail/PT1S/xyzf",
    "title" : "Best-avail second data in XYZF orientation, provided by Tsumeb, South Africa (TSU) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "tsu/best-avail/PT1S/hdzf",
    "title" : "Best-avail second data in HDZF orientation, provided by Tsumeb, South Africa (TSU) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "tsu/best-avail/PT1S/diff",
    "title" : "Best-avail second data in DIFF orientation, provided by Tsumeb, South Africa (TSU) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "ttb/adjusted/PT1M/native",
    "title" : "Adjusted minute data in the coordinate system of measurement of the data ('native'), provided by Tatuoca, Brazil (TTB) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "ttb/adjusted/PT1M/xyzf",
    "title" : "Adjusted minute data in XYZF orientation, provided by Tatuoca, Brazil (TTB) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "ttb/adjusted/PT1M/hdzf",
    "title" : "Adjusted minute data in HDZF orientation, provided by Tatuoca, Brazil (TTB) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "ttb/adjusted/PT1M/diff",
    "title" : "Adjusted minute data in DIFF orientation, provided by Tatuoca, Brazil (TTB) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "ttb/definitive/PT1M/native",
    "title" : "Definitive minute data in the coordinate system of measurement of the data ('native'), provided by Tatuoca, Brazil (TTB) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "ttb/definitive/PT1M/xyzf",
    "title" : "Definitive minute data in XYZF orientation, provided by Tatuoca, Brazil (TTB) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "ttb/definitive/PT1M/hdzf",
    "title" : "Definitive minute data in HDZF orientation, provided by Tatuoca, Brazil (TTB) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "ttb/definitive/PT1M/diff",
    "title" : "Definitive minute data in DIFF orientation, provided by Tatuoca, Brazil (TTB) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "ttb/quasi-def/PT1M/native",
    "title" : "Quasi-def minute data in the coordinate system of measurement of the data ('native'), provided by Tatuoca, Brazil (TTB) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "ttb/quasi-def/PT1M/xyzf",
    "title" : "Quasi-def minute data in XYZF orientation, provided by Tatuoca, Brazil (TTB) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "ttb/quasi-def/PT1M/hdzf",
    "title" : "Quasi-def minute data in HDZF orientation, provided by Tatuoca, Brazil (TTB) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "ttb/quasi-def/PT1M/diff",
    "title" : "Quasi-def minute data in DIFF orientation, provided by Tatuoca, Brazil (TTB) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "ttb/reported/PT1M/native",
    "title" : "Reported minute data in the coordinate system of measurement of the data ('native'), provided by Tatuoca, Brazil (TTB) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "ttb/best-avail/PT1M/native",
    "title" : "Best-avail minute data in the coordinate system of measurement of the data ('native'), provided by Tatuoca, Brazil (TTB) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "ttb/best-avail/PT1M/xyzf",
    "title" : "Best-avail minute data in XYZF orientation, provided by Tatuoca, Brazil (TTB) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "ttb/best-avail/PT1M/hdzf",
    "title" : "Best-avail minute data in HDZF orientation, provided by Tatuoca, Brazil (TTB) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "ttb/best-avail/PT1M/diff",
    "title" : "Best-avail minute data in DIFF orientation, provided by Tatuoca, Brazil (TTB) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "tuc/adjusted/PT1M/native",
    "title" : "Adjusted minute data in the coordinate system of measurement of the data ('native'), provided by Tucson, USA (TUC) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "tuc/adjusted/PT1M/xyzf",
    "title" : "Adjusted minute data in XYZF orientation, provided by Tucson, USA (TUC) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "tuc/adjusted/PT1M/hdzf",
    "title" : "Adjusted minute data in HDZF orientation, provided by Tucson, USA (TUC) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "tuc/adjusted/PT1M/diff",
    "title" : "Adjusted minute data in DIFF orientation, provided by Tucson, USA (TUC) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "tuc/definitive/PT1M/native",
    "title" : "Definitive minute data in the coordinate system of measurement of the data ('native'), provided by Tucson, USA (TUC) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "tuc/definitive/PT1M/xyzf",
    "title" : "Definitive minute data in XYZF orientation, provided by Tucson, USA (TUC) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "tuc/definitive/PT1M/hdzf",
    "title" : "Definitive minute data in HDZF orientation, provided by Tucson, USA (TUC) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "tuc/definitive/PT1M/diff",
    "title" : "Definitive minute data in DIFF orientation, provided by Tucson, USA (TUC) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "tuc/quasi-def/PT1M/native",
    "title" : "Quasi-def minute data in the coordinate system of measurement of the data ('native'), provided by Tucson, USA (TUC) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "tuc/quasi-def/PT1M/xyzf",
    "title" : "Quasi-def minute data in XYZF orientation, provided by Tucson, USA (TUC) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "tuc/quasi-def/PT1M/hdzf",
    "title" : "Quasi-def minute data in HDZF orientation, provided by Tucson, USA (TUC) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "tuc/quasi-def/PT1M/diff",
    "title" : "Quasi-def minute data in DIFF orientation, provided by Tucson, USA (TUC) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "tuc/reported/PT1M/native",
    "title" : "Reported minute data in the coordinate system of measurement of the data ('native'), provided by Tucson, USA (TUC) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "tuc/best-avail/PT1M/native",
    "title" : "Best-avail minute data in the coordinate system of measurement of the data ('native'), provided by Tucson, USA (TUC) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "tuc/best-avail/PT1M/xyzf",
    "title" : "Best-avail minute data in XYZF orientation, provided by Tucson, USA (TUC) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "tuc/best-avail/PT1M/hdzf",
    "title" : "Best-avail minute data in HDZF orientation, provided by Tucson, USA (TUC) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "tuc/best-avail/PT1M/diff",
    "title" : "Best-avail minute data in DIFF orientation, provided by Tucson, USA (TUC) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "tuc/adjusted/PT1S/native",
    "title" : "Adjusted second data in the coordinate system of measurement of the data ('native'), provided by Tucson, USA (TUC) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "tuc/adjusted/PT1S/xyzf",
    "title" : "Adjusted second data in XYZF orientation, provided by Tucson, USA (TUC) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "tuc/adjusted/PT1S/hdzf",
    "title" : "Adjusted second data in HDZF orientation, provided by Tucson, USA (TUC) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "tuc/adjusted/PT1S/diff",
    "title" : "Adjusted second data in DIFF orientation, provided by Tucson, USA (TUC) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "tuc/reported/PT1S/native",
    "title" : "Reported second data in the coordinate system of measurement of the data ('native'), provided by Tucson, USA (TUC) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "tuc/best-avail/PT1S/native",
    "title" : "Best-avail second data in the coordinate system of measurement of the data ('native'), provided by Tucson, USA (TUC) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "tuc/best-avail/PT1S/xyzf",
    "title" : "Best-avail second data in XYZF orientation, provided by Tucson, USA (TUC) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "tuc/best-avail/PT1S/hdzf",
    "title" : "Best-avail second data in HDZF orientation, provided by Tucson, USA (TUC) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "tuc/best-avail/PT1S/diff",
    "title" : "Best-avail second data in DIFF orientation, provided by Tucson, USA (TUC) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "ups/adjusted/PT1M/native",
    "title" : "Adjusted minute data in the coordinate system of measurement of the data ('native'), provided by Uppsala, Sweden (UPS) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "ups/adjusted/PT1M/xyzf",
    "title" : "Adjusted minute data in XYZF orientation, provided by Uppsala, Sweden (UPS) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "ups/adjusted/PT1M/hdzf",
    "title" : "Adjusted minute data in HDZF orientation, provided by Uppsala, Sweden (UPS) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "ups/adjusted/PT1M/diff",
    "title" : "Adjusted minute data in DIFF orientation, provided by Uppsala, Sweden (UPS) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "ups/definitive/PT1M/native",
    "title" : "Definitive minute data in the coordinate system of measurement of the data ('native'), provided by Uppsala, Sweden (UPS) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "ups/definitive/PT1M/xyzf",
    "title" : "Definitive minute data in XYZF orientation, provided by Uppsala, Sweden (UPS) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "ups/definitive/PT1M/hdzf",
    "title" : "Definitive minute data in HDZF orientation, provided by Uppsala, Sweden (UPS) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "ups/definitive/PT1M/diff",
    "title" : "Definitive minute data in DIFF orientation, provided by Uppsala, Sweden (UPS) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "ups/quasi-def/PT1M/native",
    "title" : "Quasi-def minute data in the coordinate system of measurement of the data ('native'), provided by Uppsala, Sweden (UPS) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "ups/quasi-def/PT1M/xyzf",
    "title" : "Quasi-def minute data in XYZF orientation, provided by Uppsala, Sweden (UPS) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "ups/quasi-def/PT1M/hdzf",
    "title" : "Quasi-def minute data in HDZF orientation, provided by Uppsala, Sweden (UPS) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "ups/quasi-def/PT1M/diff",
    "title" : "Quasi-def minute data in DIFF orientation, provided by Uppsala, Sweden (UPS) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "ups/reported/PT1M/native",
    "title" : "Reported minute data in the coordinate system of measurement of the data ('native'), provided by Uppsala, Sweden (UPS) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "ups/best-avail/PT1M/native",
    "title" : "Best-avail minute data in the coordinate system of measurement of the data ('native'), provided by Uppsala, Sweden (UPS) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "ups/best-avail/PT1M/xyzf",
    "title" : "Best-avail minute data in XYZF orientation, provided by Uppsala, Sweden (UPS) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "ups/best-avail/PT1M/hdzf",
    "title" : "Best-avail minute data in HDZF orientation, provided by Uppsala, Sweden (UPS) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "ups/best-avail/PT1M/diff",
    "title" : "Best-avail minute data in DIFF orientation, provided by Uppsala, Sweden (UPS) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "ups/adjusted/PT1S/native",
    "title" : "Adjusted second data in the coordinate system of measurement of the data ('native'), provided by Uppsala, Sweden (UPS) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "ups/adjusted/PT1S/xyzf",
    "title" : "Adjusted second data in XYZF orientation, provided by Uppsala, Sweden (UPS) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "ups/adjusted/PT1S/hdzf",
    "title" : "Adjusted second data in HDZF orientation, provided by Uppsala, Sweden (UPS) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "ups/adjusted/PT1S/diff",
    "title" : "Adjusted second data in DIFF orientation, provided by Uppsala, Sweden (UPS) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "ups/quasi-def/PT1S/native",
    "title" : "Quasi-def second data in the coordinate system of measurement of the data ('native'), provided by Uppsala, Sweden (UPS) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "ups/quasi-def/PT1S/xyzf",
    "title" : "Quasi-def second data in XYZF orientation, provided by Uppsala, Sweden (UPS) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "ups/quasi-def/PT1S/hdzf",
    "title" : "Quasi-def second data in HDZF orientation, provided by Uppsala, Sweden (UPS) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "ups/quasi-def/PT1S/diff",
    "title" : "Quasi-def second data in DIFF orientation, provided by Uppsala, Sweden (UPS) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "ups/reported/PT1S/native",
    "title" : "Reported second data in the coordinate system of measurement of the data ('native'), provided by Uppsala, Sweden (UPS) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "ups/best-avail/PT1S/native",
    "title" : "Best-avail second data in the coordinate system of measurement of the data ('native'), provided by Uppsala, Sweden (UPS) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "ups/best-avail/PT1S/xyzf",
    "title" : "Best-avail second data in XYZF orientation, provided by Uppsala, Sweden (UPS) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "ups/best-avail/PT1S/hdzf",
    "title" : "Best-avail second data in HDZF orientation, provided by Uppsala, Sweden (UPS) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "ups/best-avail/PT1S/diff",
    "title" : "Best-avail second data in DIFF orientation, provided by Uppsala, Sweden (UPS) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "val/adjusted/PT1M/native",
    "title" : "Adjusted minute data in the coordinate system of measurement of the data ('native'), provided by Valentia, Eire (VAL) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "val/adjusted/PT1M/xyzf",
    "title" : "Adjusted minute data in XYZF orientation, provided by Valentia, Eire (VAL) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "val/adjusted/PT1M/hdzf",
    "title" : "Adjusted minute data in HDZF orientation, provided by Valentia, Eire (VAL) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "val/adjusted/PT1M/diff",
    "title" : "Adjusted minute data in DIFF orientation, provided by Valentia, Eire (VAL) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "val/definitive/PT1M/native",
    "title" : "Definitive minute data in the coordinate system of measurement of the data ('native'), provided by Valentia, Eire (VAL) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "val/definitive/PT1M/xyzf",
    "title" : "Definitive minute data in XYZF orientation, provided by Valentia, Eire (VAL) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "val/definitive/PT1M/hdzf",
    "title" : "Definitive minute data in HDZF orientation, provided by Valentia, Eire (VAL) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "val/definitive/PT1M/diff",
    "title" : "Definitive minute data in DIFF orientation, provided by Valentia, Eire (VAL) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "val/reported/PT1M/native",
    "title" : "Reported minute data in the coordinate system of measurement of the data ('native'), provided by Valentia, Eire (VAL) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "val/best-avail/PT1M/native",
    "title" : "Best-avail minute data in the coordinate system of measurement of the data ('native'), provided by Valentia, Eire (VAL) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "val/best-avail/PT1M/xyzf",
    "title" : "Best-avail minute data in XYZF orientation, provided by Valentia, Eire (VAL) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "val/best-avail/PT1M/hdzf",
    "title" : "Best-avail minute data in HDZF orientation, provided by Valentia, Eire (VAL) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "val/best-avail/PT1M/diff",
    "title" : "Best-avail minute data in DIFF orientation, provided by Valentia, Eire (VAL) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "vic/definitive/PT1M/native",
    "title" : "Definitive minute data in the coordinate system of measurement of the data ('native'), provided by Victoria, Canada (VIC) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "vic/definitive/PT1M/xyzf",
    "title" : "Definitive minute data in XYZF orientation, provided by Victoria, Canada (VIC) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "vic/definitive/PT1M/hdzf",
    "title" : "Definitive minute data in HDZF orientation, provided by Victoria, Canada (VIC) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "vic/definitive/PT1M/diff",
    "title" : "Definitive minute data in DIFF orientation, provided by Victoria, Canada (VIC) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "vic/reported/PT1M/native",
    "title" : "Reported minute data in the coordinate system of measurement of the data ('native'), provided by Victoria, Canada (VIC) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "vic/best-avail/PT1M/native",
    "title" : "Best-avail minute data in the coordinate system of measurement of the data ('native'), provided by Victoria, Canada (VIC) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "vic/best-avail/PT1M/xyzf",
    "title" : "Best-avail minute data in XYZF orientation, provided by Victoria, Canada (VIC) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "vic/best-avail/PT1M/hdzf",
    "title" : "Best-avail minute data in HDZF orientation, provided by Victoria, Canada (VIC) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "vic/best-avail/PT1M/diff",
    "title" : "Best-avail minute data in DIFF orientation, provided by Victoria, Canada (VIC) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "vic/reported/PT1S/native",
    "title" : "Reported second data in the coordinate system of measurement of the data ('native'), provided by Victoria, Canada (VIC) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "vic/best-avail/PT1S/native",
    "title" : "Best-avail second data in the coordinate system of measurement of the data ('native'), provided by Victoria, Canada (VIC) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "vic/best-avail/PT1S/xyzf",
    "title" : "Best-avail second data in XYZF orientation, provided by Victoria, Canada (VIC) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "vic/best-avail/PT1S/hdzf",
    "title" : "Best-avail second data in HDZF orientation, provided by Victoria, Canada (VIC) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "vic/best-avail/PT1S/diff",
    "title" : "Best-avail second data in DIFF orientation, provided by Victoria, Canada (VIC) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "vna/adjusted/PT1M/native",
    "title" : "Adjusted minute data in the coordinate system of measurement of the data ('native'), provided by Neumayer Station, Antarctica (VNA) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "vna/adjusted/PT1M/xyzf",
    "title" : "Adjusted minute data in XYZF orientation, provided by Neumayer Station, Antarctica (VNA) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "vna/adjusted/PT1M/hdzf",
    "title" : "Adjusted minute data in HDZF orientation, provided by Neumayer Station, Antarctica (VNA) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "vna/adjusted/PT1M/diff",
    "title" : "Adjusted minute data in DIFF orientation, provided by Neumayer Station, Antarctica (VNA) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "vna/definitive/PT1M/native",
    "title" : "Definitive minute data in the coordinate system of measurement of the data ('native'), provided by Neumayer Station, Antarctica (VNA) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "vna/definitive/PT1M/xyzf",
    "title" : "Definitive minute data in XYZF orientation, provided by Neumayer Station, Antarctica (VNA) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "vna/definitive/PT1M/hdzf",
    "title" : "Definitive minute data in HDZF orientation, provided by Neumayer Station, Antarctica (VNA) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "vna/definitive/PT1M/diff",
    "title" : "Definitive minute data in DIFF orientation, provided by Neumayer Station, Antarctica (VNA) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "vna/quasi-def/PT1M/native",
    "title" : "Quasi-def minute data in the coordinate system of measurement of the data ('native'), provided by Neumayer Station, Antarctica (VNA) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "vna/quasi-def/PT1M/xyzf",
    "title" : "Quasi-def minute data in XYZF orientation, provided by Neumayer Station, Antarctica (VNA) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "vna/quasi-def/PT1M/hdzf",
    "title" : "Quasi-def minute data in HDZF orientation, provided by Neumayer Station, Antarctica (VNA) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "vna/quasi-def/PT1M/diff",
    "title" : "Quasi-def minute data in DIFF orientation, provided by Neumayer Station, Antarctica (VNA) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "vna/reported/PT1M/native",
    "title" : "Reported minute data in the coordinate system of measurement of the data ('native'), provided by Neumayer Station, Antarctica (VNA) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "vna/best-avail/PT1M/native",
    "title" : "Best-avail minute data in the coordinate system of measurement of the data ('native'), provided by Neumayer Station, Antarctica (VNA) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "vna/best-avail/PT1M/xyzf",
    "title" : "Best-avail minute data in XYZF orientation, provided by Neumayer Station, Antarctica (VNA) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "vna/best-avail/PT1M/hdzf",
    "title" : "Best-avail minute data in HDZF orientation, provided by Neumayer Station, Antarctica (VNA) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "vna/best-avail/PT1M/diff",
    "title" : "Best-avail minute data in DIFF orientation, provided by Neumayer Station, Antarctica (VNA) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "vna/quasi-def/PT1S/native",
    "title" : "Quasi-def second data in the coordinate system of measurement of the data ('native'), provided by Neumayer Station, Antarctica (VNA) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "vna/quasi-def/PT1S/xyzf",
    "title" : "Quasi-def second data in XYZF orientation, provided by Neumayer Station, Antarctica (VNA) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "vna/quasi-def/PT1S/hdzf",
    "title" : "Quasi-def second data in HDZF orientation, provided by Neumayer Station, Antarctica (VNA) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "vna/quasi-def/PT1S/diff",
    "title" : "Quasi-def second data in DIFF orientation, provided by Neumayer Station, Antarctica (VNA) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "vna/best-avail/PT1S/native",
    "title" : "Best-avail second data in the coordinate system of measurement of the data ('native'), provided by Neumayer Station, Antarctica (VNA) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "vna/best-avail/PT1S/xyzf",
    "title" : "Best-avail second data in XYZF orientation, provided by Neumayer Station, Antarctica (VNA) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "vna/best-avail/PT1S/hdzf",
    "title" : "Best-avail second data in HDZF orientation, provided by Neumayer Station, Antarctica (VNA) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "vna/best-avail/PT1S/diff",
    "title" : "Best-avail second data in DIFF orientation, provided by Neumayer Station, Antarctica (VNA) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "vos/adjusted/PT1M/native",
    "title" : "Adjusted minute data in the coordinate system of measurement of the data ('native'), provided by Vostok, Antarctica (VOS) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "vos/adjusted/PT1M/xyzf",
    "title" : "Adjusted minute data in XYZF orientation, provided by Vostok, Antarctica (VOS) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "vos/adjusted/PT1M/hdzf",
    "title" : "Adjusted minute data in HDZF orientation, provided by Vostok, Antarctica (VOS) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "vos/adjusted/PT1M/diff",
    "title" : "Adjusted minute data in DIFF orientation, provided by Vostok, Antarctica (VOS) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "vos/definitive/PT1M/native",
    "title" : "Definitive minute data in the coordinate system of measurement of the data ('native'), provided by Vostok, Antarctica (VOS) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "vos/definitive/PT1M/xyzf",
    "title" : "Definitive minute data in XYZF orientation, provided by Vostok, Antarctica (VOS) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "vos/definitive/PT1M/hdzf",
    "title" : "Definitive minute data in HDZF orientation, provided by Vostok, Antarctica (VOS) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "vos/definitive/PT1M/diff",
    "title" : "Definitive minute data in DIFF orientation, provided by Vostok, Antarctica (VOS) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "vos/reported/PT1M/native",
    "title" : "Reported minute data in the coordinate system of measurement of the data ('native'), provided by Vostok, Antarctica (VOS) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "vos/best-avail/PT1M/native",
    "title" : "Best-avail minute data in the coordinate system of measurement of the data ('native'), provided by Vostok, Antarctica (VOS) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "vos/best-avail/PT1M/xyzf",
    "title" : "Best-avail minute data in XYZF orientation, provided by Vostok, Antarctica (VOS) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "vos/best-avail/PT1M/hdzf",
    "title" : "Best-avail minute data in HDZF orientation, provided by Vostok, Antarctica (VOS) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "vos/best-avail/PT1M/diff",
    "title" : "Best-avail minute data in DIFF orientation, provided by Vostok, Antarctica (VOS) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "vss/adjusted/PT1M/native",
    "title" : "Adjusted minute data in the coordinate system of measurement of the data ('native'), provided by Vassouras, Brazil (VSS) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "vss/adjusted/PT1M/xyzf",
    "title" : "Adjusted minute data in XYZF orientation, provided by Vassouras, Brazil (VSS) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "vss/adjusted/PT1M/hdzf",
    "title" : "Adjusted minute data in HDZF orientation, provided by Vassouras, Brazil (VSS) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "vss/adjusted/PT1M/diff",
    "title" : "Adjusted minute data in DIFF orientation, provided by Vassouras, Brazil (VSS) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "vss/definitive/PT1M/native",
    "title" : "Definitive minute data in the coordinate system of measurement of the data ('native'), provided by Vassouras, Brazil (VSS) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "vss/definitive/PT1M/xyzf",
    "title" : "Definitive minute data in XYZF orientation, provided by Vassouras, Brazil (VSS) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "vss/definitive/PT1M/hdzf",
    "title" : "Definitive minute data in HDZF orientation, provided by Vassouras, Brazil (VSS) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "vss/definitive/PT1M/diff",
    "title" : "Definitive minute data in DIFF orientation, provided by Vassouras, Brazil (VSS) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "vss/quasi-def/PT1M/native",
    "title" : "Quasi-def minute data in the coordinate system of measurement of the data ('native'), provided by Vassouras, Brazil (VSS) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "vss/quasi-def/PT1M/xyzf",
    "title" : "Quasi-def minute data in XYZF orientation, provided by Vassouras, Brazil (VSS) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "vss/quasi-def/PT1M/hdzf",
    "title" : "Quasi-def minute data in HDZF orientation, provided by Vassouras, Brazil (VSS) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "vss/quasi-def/PT1M/diff",
    "title" : "Quasi-def minute data in DIFF orientation, provided by Vassouras, Brazil (VSS) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "vss/reported/PT1M/native",
    "title" : "Reported minute data in the coordinate system of measurement of the data ('native'), provided by Vassouras, Brazil (VSS) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "vss/best-avail/PT1M/native",
    "title" : "Best-avail minute data in the coordinate system of measurement of the data ('native'), provided by Vassouras, Brazil (VSS) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "vss/best-avail/PT1M/xyzf",
    "title" : "Best-avail minute data in XYZF orientation, provided by Vassouras, Brazil (VSS) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "vss/best-avail/PT1M/hdzf",
    "title" : "Best-avail minute data in HDZF orientation, provided by Vassouras, Brazil (VSS) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "vss/best-avail/PT1M/diff",
    "title" : "Best-avail minute data in DIFF orientation, provided by Vassouras, Brazil (VSS) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "wic/adjusted/PT1M/native",
    "title" : "Adjusted minute data in the coordinate system of measurement of the data ('native'), provided by Conrad, Austria (WIC) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "wic/adjusted/PT1M/xyzf",
    "title" : "Adjusted minute data in XYZF orientation, provided by Conrad, Austria (WIC) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "wic/adjusted/PT1M/hdzf",
    "title" : "Adjusted minute data in HDZF orientation, provided by Conrad, Austria (WIC) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "wic/adjusted/PT1M/diff",
    "title" : "Adjusted minute data in DIFF orientation, provided by Conrad, Austria (WIC) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "wic/definitive/PT1M/native",
    "title" : "Definitive minute data in the coordinate system of measurement of the data ('native'), provided by Conrad, Austria (WIC) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "wic/definitive/PT1M/xyzf",
    "title" : "Definitive minute data in XYZF orientation, provided by Conrad, Austria (WIC) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "wic/definitive/PT1M/hdzf",
    "title" : "Definitive minute data in HDZF orientation, provided by Conrad, Austria (WIC) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "wic/definitive/PT1M/diff",
    "title" : "Definitive minute data in DIFF orientation, provided by Conrad, Austria (WIC) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "wic/quasi-def/PT1M/native",
    "title" : "Quasi-def minute data in the coordinate system of measurement of the data ('native'), provided by Conrad, Austria (WIC) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "wic/quasi-def/PT1M/xyzf",
    "title" : "Quasi-def minute data in XYZF orientation, provided by Conrad, Austria (WIC) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "wic/quasi-def/PT1M/hdzf",
    "title" : "Quasi-def minute data in HDZF orientation, provided by Conrad, Austria (WIC) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "wic/quasi-def/PT1M/diff",
    "title" : "Quasi-def minute data in DIFF orientation, provided by Conrad, Austria (WIC) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "wic/reported/PT1M/native",
    "title" : "Reported minute data in the coordinate system of measurement of the data ('native'), provided by Conrad, Austria (WIC) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "wic/best-avail/PT1M/native",
    "title" : "Best-avail minute data in the coordinate system of measurement of the data ('native'), provided by Conrad, Austria (WIC) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "wic/best-avail/PT1M/xyzf",
    "title" : "Best-avail minute data in XYZF orientation, provided by Conrad, Austria (WIC) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "wic/best-avail/PT1M/hdzf",
    "title" : "Best-avail minute data in HDZF orientation, provided by Conrad, Austria (WIC) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "wic/best-avail/PT1M/diff",
    "title" : "Best-avail minute data in DIFF orientation, provided by Conrad, Austria (WIC) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "wic/adjusted/PT1S/native",
    "title" : "Adjusted second data in the coordinate system of measurement of the data ('native'), provided by Conrad, Austria (WIC) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "wic/adjusted/PT1S/xyzf",
    "title" : "Adjusted second data in XYZF orientation, provided by Conrad, Austria (WIC) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "wic/adjusted/PT1S/hdzf",
    "title" : "Adjusted second data in HDZF orientation, provided by Conrad, Austria (WIC) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "wic/adjusted/PT1S/diff",
    "title" : "Adjusted second data in DIFF orientation, provided by Conrad, Austria (WIC) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "wic/quasi-def/PT1S/native",
    "title" : "Quasi-def second data in the coordinate system of measurement of the data ('native'), provided by Conrad, Austria (WIC) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "wic/quasi-def/PT1S/xyzf",
    "title" : "Quasi-def second data in XYZF orientation, provided by Conrad, Austria (WIC) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "wic/quasi-def/PT1S/hdzf",
    "title" : "Quasi-def second data in HDZF orientation, provided by Conrad, Austria (WIC) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "wic/quasi-def/PT1S/diff",
    "title" : "Quasi-def second data in DIFF orientation, provided by Conrad, Austria (WIC) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "wic/reported/PT1S/native",
    "title" : "Reported second data in the coordinate system of measurement of the data ('native'), provided by Conrad, Austria (WIC) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "wic/best-avail/PT1S/native",
    "title" : "Best-avail second data in the coordinate system of measurement of the data ('native'), provided by Conrad, Austria (WIC) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "wic/best-avail/PT1S/xyzf",
    "title" : "Best-avail second data in XYZF orientation, provided by Conrad, Austria (WIC) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "wic/best-avail/PT1S/hdzf",
    "title" : "Best-avail second data in HDZF orientation, provided by Conrad, Austria (WIC) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "wic/best-avail/PT1S/diff",
    "title" : "Best-avail second data in DIFF orientation, provided by Conrad, Austria (WIC) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "wmq/adjusted/PT1M/native",
    "title" : "Adjusted minute data in the coordinate system of measurement of the data ('native'), provided by Urumqi, China (WMQ) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "wmq/adjusted/PT1M/xyzf",
    "title" : "Adjusted minute data in XYZF orientation, provided by Urumqi, China (WMQ) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "wmq/adjusted/PT1M/hdzf",
    "title" : "Adjusted minute data in HDZF orientation, provided by Urumqi, China (WMQ) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "wmq/adjusted/PT1M/diff",
    "title" : "Adjusted minute data in DIFF orientation, provided by Urumqi, China (WMQ) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "wmq/reported/PT1M/native",
    "title" : "Reported minute data in the coordinate system of measurement of the data ('native'), provided by Urumqi, China (WMQ) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "wmq/best-avail/PT1M/native",
    "title" : "Best-avail minute data in the coordinate system of measurement of the data ('native'), provided by Urumqi, China (WMQ) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "wmq/best-avail/PT1M/xyzf",
    "title" : "Best-avail minute data in XYZF orientation, provided by Urumqi, China (WMQ) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "wmq/best-avail/PT1M/hdzf",
    "title" : "Best-avail minute data in HDZF orientation, provided by Urumqi, China (WMQ) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "wmq/best-avail/PT1M/diff",
    "title" : "Best-avail minute data in DIFF orientation, provided by Urumqi, China (WMQ) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "wng/adjusted/PT1M/native",
    "title" : "Adjusted minute data in the coordinate system of measurement of the data ('native'), provided by Wingst, Germany (WNG) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "wng/adjusted/PT1M/xyzf",
    "title" : "Adjusted minute data in XYZF orientation, provided by Wingst, Germany (WNG) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "wng/adjusted/PT1M/hdzf",
    "title" : "Adjusted minute data in HDZF orientation, provided by Wingst, Germany (WNG) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "wng/adjusted/PT1M/diff",
    "title" : "Adjusted minute data in DIFF orientation, provided by Wingst, Germany (WNG) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "wng/definitive/PT1M/native",
    "title" : "Definitive minute data in the coordinate system of measurement of the data ('native'), provided by Wingst, Germany (WNG) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "wng/definitive/PT1M/xyzf",
    "title" : "Definitive minute data in XYZF orientation, provided by Wingst, Germany (WNG) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "wng/definitive/PT1M/hdzf",
    "title" : "Definitive minute data in HDZF orientation, provided by Wingst, Germany (WNG) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "wng/definitive/PT1M/diff",
    "title" : "Definitive minute data in DIFF orientation, provided by Wingst, Germany (WNG) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "wng/quasi-def/PT1M/native",
    "title" : "Quasi-def minute data in the coordinate system of measurement of the data ('native'), provided by Wingst, Germany (WNG) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "wng/quasi-def/PT1M/xyzf",
    "title" : "Quasi-def minute data in XYZF orientation, provided by Wingst, Germany (WNG) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "wng/quasi-def/PT1M/hdzf",
    "title" : "Quasi-def minute data in HDZF orientation, provided by Wingst, Germany (WNG) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "wng/quasi-def/PT1M/diff",
    "title" : "Quasi-def minute data in DIFF orientation, provided by Wingst, Germany (WNG) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "wng/reported/PT1M/native",
    "title" : "Reported minute data in the coordinate system of measurement of the data ('native'), provided by Wingst, Germany (WNG) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "wng/best-avail/PT1M/native",
    "title" : "Best-avail minute data in the coordinate system of measurement of the data ('native'), provided by Wingst, Germany (WNG) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "wng/best-avail/PT1M/xyzf",
    "title" : "Best-avail minute data in XYZF orientation, provided by Wingst, Germany (WNG) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "wng/best-avail/PT1M/hdzf",
    "title" : "Best-avail minute data in HDZF orientation, provided by Wingst, Germany (WNG) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "wng/best-avail/PT1M/diff",
    "title" : "Best-avail minute data in DIFF orientation, provided by Wingst, Germany (WNG) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "wng/adjusted/PT1S/native",
    "title" : "Adjusted second data in the coordinate system of measurement of the data ('native'), provided by Wingst, Germany (WNG) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "wng/adjusted/PT1S/xyzf",
    "title" : "Adjusted second data in XYZF orientation, provided by Wingst, Germany (WNG) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "wng/adjusted/PT1S/hdzf",
    "title" : "Adjusted second data in HDZF orientation, provided by Wingst, Germany (WNG) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "wng/adjusted/PT1S/diff",
    "title" : "Adjusted second data in DIFF orientation, provided by Wingst, Germany (WNG) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "wng/quasi-def/PT1S/native",
    "title" : "Quasi-def second data in the coordinate system of measurement of the data ('native'), provided by Wingst, Germany (WNG) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "wng/quasi-def/PT1S/xyzf",
    "title" : "Quasi-def second data in XYZF orientation, provided by Wingst, Germany (WNG) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "wng/quasi-def/PT1S/hdzf",
    "title" : "Quasi-def second data in HDZF orientation, provided by Wingst, Germany (WNG) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "wng/quasi-def/PT1S/diff",
    "title" : "Quasi-def second data in DIFF orientation, provided by Wingst, Germany (WNG) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "wng/best-avail/PT1S/native",
    "title" : "Best-avail second data in the coordinate system of measurement of the data ('native'), provided by Wingst, Germany (WNG) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "wng/best-avail/PT1S/xyzf",
    "title" : "Best-avail second data in XYZF orientation, provided by Wingst, Germany (WNG) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "wng/best-avail/PT1S/hdzf",
    "title" : "Best-avail second data in HDZF orientation, provided by Wingst, Germany (WNG) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "wng/best-avail/PT1S/diff",
    "title" : "Best-avail second data in DIFF orientation, provided by Wingst, Germany (WNG) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "yak/adjusted/PT1M/native",
    "title" : "Adjusted minute data in the coordinate system of measurement of the data ('native'), provided by Yakutsk, Russia (YAK) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "yak/adjusted/PT1M/xyzf",
    "title" : "Adjusted minute data in XYZF orientation, provided by Yakutsk, Russia (YAK) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "yak/adjusted/PT1M/hdzf",
    "title" : "Adjusted minute data in HDZF orientation, provided by Yakutsk, Russia (YAK) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "yak/adjusted/PT1M/diff",
    "title" : "Adjusted minute data in DIFF orientation, provided by Yakutsk, Russia (YAK) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "yak/definitive/PT1M/native",
    "title" : "Definitive minute data in the coordinate system of measurement of the data ('native'), provided by Yakutsk, Russia (YAK) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "yak/definitive/PT1M/xyzf",
    "title" : "Definitive minute data in XYZF orientation, provided by Yakutsk, Russia (YAK) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "yak/definitive/PT1M/hdzf",
    "title" : "Definitive minute data in HDZF orientation, provided by Yakutsk, Russia (YAK) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "yak/definitive/PT1M/diff",
    "title" : "Definitive minute data in DIFF orientation, provided by Yakutsk, Russia (YAK) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "yak/reported/PT1M/native",
    "title" : "Reported minute data in the coordinate system of measurement of the data ('native'), provided by Yakutsk, Russia (YAK) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "yak/best-avail/PT1M/native",
    "title" : "Best-avail minute data in the coordinate system of measurement of the data ('native'), provided by Yakutsk, Russia (YAK) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "yak/best-avail/PT1M/xyzf",
    "title" : "Best-avail minute data in XYZF orientation, provided by Yakutsk, Russia (YAK) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "yak/best-avail/PT1M/hdzf",
    "title" : "Best-avail minute data in HDZF orientation, provided by Yakutsk, Russia (YAK) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "yak/best-avail/PT1M/diff",
    "title" : "Best-avail minute data in DIFF orientation, provided by Yakutsk, Russia (YAK) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "ykc/definitive/PT1M/native",
    "title" : "Definitive minute data in the coordinate system of measurement of the data ('native'), provided by Yellowknife, Canada (YKC) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "ykc/definitive/PT1M/xyzf",
    "title" : "Definitive minute data in XYZF orientation, provided by Yellowknife, Canada (YKC) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "ykc/definitive/PT1M/hdzf",
    "title" : "Definitive minute data in HDZF orientation, provided by Yellowknife, Canada (YKC) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "ykc/definitive/PT1M/diff",
    "title" : "Definitive minute data in DIFF orientation, provided by Yellowknife, Canada (YKC) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "ykc/reported/PT1M/native",
    "title" : "Reported minute data in the coordinate system of measurement of the data ('native'), provided by Yellowknife, Canada (YKC) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "ykc/best-avail/PT1M/native",
    "title" : "Best-avail minute data in the coordinate system of measurement of the data ('native'), provided by Yellowknife, Canada (YKC) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "ykc/best-avail/PT1M/xyzf",
    "title" : "Best-avail minute data in XYZF orientation, provided by Yellowknife, Canada (YKC) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "ykc/best-avail/PT1M/hdzf",
    "title" : "Best-avail minute data in HDZF orientation, provided by Yellowknife, Canada (YKC) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "ykc/best-avail/PT1M/diff",
    "title" : "Best-avail minute data in DIFF orientation, provided by Yellowknife, Canada (YKC) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "ykc/reported/PT1S/native",
    "title" : "Reported second data in the coordinate system of measurement of the data ('native'), provided by Yellowknife, Canada (YKC) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "ykc/best-avail/PT1S/native",
    "title" : "Best-avail second data in the coordinate system of measurement of the data ('native'), provided by Yellowknife, Canada (YKC) observatory. The units and labels that apply for the parameters depend on this orientation. For example, if the native coordinate system is X, Y, Z then the labels are X, Y, Z and units nT, nT, nT. Note that the coordinate system of measurements of data provided by the observatory may change in the time interval indicated by startDate/stopDate. A parameter called 'vectorComponents' is available for this data set which describes the data's coordinate system. Data are also available in a single coordinate system over the full time interval of available data; these datasets have ids with 'xyzf', 'hdzf', and 'diff' in place of 'native'. See also https://intermagnet.org/faq/10.geomagnetic-comp.html."
  }, {
    "id" : "ykc/best-avail/PT1S/xyzf",
    "title" : "Best-avail second data in XYZF orientation, provided by Yellowknife, Canada (YKC) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "ykc/best-avail/PT1S/hdzf",
    "title" : "Best-avail second data in HDZF orientation, provided by Yellowknife, Canada (YKC) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  }, {
    "id" : "ykc/best-avail/PT1S/diff",
    "title" : "Best-avail second data in DIFF orientation, provided by Yellowknife, Canada (YKC) observatory. See https://intermagnet.org/faq/10.geomagnetic-comp.html for a description of the Geomagnetic orientation used in this data."
  } ]
}